Main Gate Renovation Work

Amount

EARTHWORK

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

REINFORCED CEMENT CONCRETE

Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

FORM WORK

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab up 0.50 sqm.

STEEL WORKS

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished seamless type tubes

Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

FINISHING CEMENT PLASTER (IN COARSE SAND)

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

ROAD WORK

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

NON DSR ITEMS

Constructing brick masonry road gully chamber 1.5 x1.5 x 2 Feet with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including 12 mm plaster 1:6 (1 cement : 6 coarse sand )

Providing and Laying 8“ ISI Approved PVC Pipe of 6 kg pressure for Laying Drainage Line, inclusive all relevant fittings. )

Electric LED Street lighting with poles

Supply and laying with digging the ground upto .5 mtr depth and fixing accessory (as required) and re-fixing protection of underground cable as required all complete, PVC Insulated aluminum armored cable of the size 2x25 mm

Supplying and fixing of 70 wattsPost top lamp light fixture completed as required all complete.(Eq. to BAJAJ cat. No.-BJDPTI 70SV/MH LPF).

Supplying and fixing of L-Type B class pipe 40 mm diameter supporting for street light pole 1 meter long and digging the ground depth of 0.50 mm, i/c excavation and refilling / protection of under ground cable as required all complete.

Supplying and fixing of weather dust and vermin proof SMC Box sixe 200 mm x140 mm x 95 mm with all fittings and fixtures complete as required.(Make JB 2014 SYNTEX)

Supplying, erection, testing and commissioning of 4M height Pole made of MS pipe duly hot dip galvanised, primered and PU painted. The pole is provided with heavy duty connector inside the junction box for loop-in-loop out of the cable. Pole shall be complete with all accessories as required.

Supplying, installation, testing and commissioning of M.V. cubical type totally enclosed dust, dump and vermin proof Control panel for outdoor duty complete with canopy.The panel shall be made out of 14 SWG Cold Rolled Close Annealed (CRCA) Sheet Steel with lockable doors with bus bars, 63 amp MCB DP, with MV Danger notice plate, connection of incoming and outgoing cables with thimbles, having incoming and outgoing switch fuse/ fuse,MCBs, MCCBs as required complete in all respect.

Security Guard Room

Construction of security guard room (Size 3.5mx4m) including all foundation work. Civil structure of room to have 4 nos 230 x 230mmm RCC pillars with adequate reinforcement, infill walls from 230mm thick 1st class brick work ,12 mm plaster work on interiror and exterior walls and ceilings, vitrified tiles flooring and dado, Granite slab counter in ’ L’ Shape, Aluminum powder coated openable windows on two walls (3.50 Sqm) and 32 mm waterpoof both side laminated flush door (2.2 sq.m) fixed in MS Box Door Frame with all fittings locks etc. 125 mm thick RCC roof slab (floor to slab height 2700 mm) with water proofing. Roof Slab to have 150mm high 115 mm thick parapet wall all around of 1st class brickwork and 1 nos khurra with 100mm PVC rain water downpipe with all bends complete. Interior and Exterior synthetic paint work over base of 2mm wall putty. Electrical works inclusive of conduitng, all wiring and provision and instalation of switches, fan regulator, 3 Nos. light socket and 1 Nos. power sockets (Anchor Roma make), 1 Nos telephone point, 2 Nos LED tube light (Havells Make) and 1 Nos 48" inch ceiling fan (Crompton make) complete in all respect.

Signage Board

Providing and fixing fabricated with 304 grade stainless steel 22 SWG SS Sheet, 300 mm height, 200 mm width, Alphabets fitted with SS fastener (DESHBANDHU COLLEGE, KALKAJI UNIVERSITY OF DELHI) COLOR STEEL CROME /STEEL GOLDEN with LED light provision complete in all respect.

SHREE KRISHNA CONSTRUCTION CO.

GRAVITY INFRASTRUCTURES

NARESH SACHDEVA

Harichand and Co.

star construction company

Baljeet Builders and Interior Decorators

S S Builders and Construction Co.