SE/GC/TIN/C54/2019-20

Amount

Dismantling the existing damaged wooden Doors, windows and ventilators including frames, hinges and fastening including cost of lead, lift, etc complete.

Dismantling the existing damaged Cement mortar flooring including cost of lead, lift, etc complete.

Brickwork in CM 1:3 mix using IInd class chamber burnt brick of size 9"x 4 3/8"x 2 3/4" including cost of all materials labour lead lift curing etc complete.

Supplying and fixing in position of single leaf half Weld mesh 25mmx 25mm x10Gauge and half MS sheet door required size with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame and braced with 20 x 5 mm flat as per specification including concreting, plastering for refixing place, cost of all materials, necessary fittings, aldrop tower bolt, handle, lead, lift etc ., complete. (0.95x1.95m)

Supplying and fixing in position of Double leaf door of required size with 35x35x5 mm ISA for door frame and 25 x 25 x 5 mm ISA angle for shutter frame,25x4mm thick flat bracing as per specification including cost of all materials, necessary fittings, aldrop tower bolt, handle, lead, lift etc complete.(0.95x1.95m)

Supplying and fixing in position of single leaf MS sheet door required size with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame and braced with 20 x 5 mm flat as per specification including concreting, plastering for refixing place, cost of all materials, necessary fittings, aldrop tower bolt, handle, lead, lift etc complete. (0.75x1.80m)

Supplying and fixing in position of single leaf 18mm thick Plain cement sheet door with required size of aluminium channel with 35x35x5 mm ISA for outer frame including cost of 2ft door flat ,necessary fittings, 8" aldrop, bolt & nut, screw, handle, as per specification and direction site Engineer lead, lift etc.,complete. (0.75x1.83)

Supplying and fixing in position of four / two part weld-mesh 25mmx25mmx10Gauge and M S Sheet coverd grill window of required size with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame and braced with 20 x 5 mm flat as per specification including concreting, plastering for refixing place, cost of all materials, fabrication charges, transporting charges, lead, lift etc Complete.

Cement morter floor finising with cm 1:3, 20 mm thick including cost of materials, labour,T & P, lead,lift etc complete

Removing the existing door shutter before laying of tiles and refilling the door shutter in posiion after the tile is laid,making necessary alteration for reducing the height in the shutter including the cost of labour,lead,lift,T&P etc., complete

Paving the approved quality of virtified tiles size 600X600x8 mm over a base layer of Cement mortor 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including of all materials, labour, lead, lift, etc complete.

Paving the approved quality of anti skid ceramic tiles size 305X305x6 mm, over a base layer of Cement mortar 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc complete .

Dadooing the wall with best approved quality glazed tiles of silze 300x200x6mm, over a base layer of Cement mortar 1:3, 12 mm thick pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc.,complete .

Plastering with CM 1:5 mix, 12mm thick for wall including cost of labour ,materials , lead, lift , curing etc., complete.

Plastering with CM 1:3 mix ,12mm thick for ceiling/water tank wall including cost of labour materials , lead, lift , curing etc., complete.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD-70)

Supply and run of 2 of 4 Sqmm(56/0.3) PVC insulated SC unsheathed cu.conductor of 1100V on 7/20GI bearer wire for service connection mains.(SD.65)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 1 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) and phase bulb on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board, with earth connection only (S.D-144)

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch, covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (For electronic regulator)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.(SD-133)

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 113mm TW switch box with 3mm thick Hylem sheet cover for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39)

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with TW round block on wall or ceiling with PVC unsheathed leads from terminals to the fitting with tube.

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb. (SD-80)

Supplying and fixing of 230mm SL Bracket with ISI fancy shade approved by Engineer at site with 1 No. 18 W CFL bulb. (SD 82)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD-228)

Supplying and fixing in position of 15mm dia brass screw down bib cock of best quality including cost of materials lead, lift & labour etc complete.

Cuddapah slab sink of size 600mmx 450mm x 200mm with 32mm dia 'B' class GI waste water pipe & 32mm dia C.P waste coupling including cost of materials lead lift labour etc complete.

Supplying and fixing of Anodised Aluminium Towel rail 60cm long and 20mm dia with Brackets including cost of materials lead lift labour etc complete.

Supplying and fixing of 75 mm dia PVC pipe including PVC bend, Elbow wherever necessary, all cost of materails lead lift etc complete.

Supplying and fixing of 25 mm dia PVC pipe 10Kg/m²including GI TEE, GI Elbow wherever necessary, all cost of materails lead lift etc complete.

Providing and fixing in position Indian water closet ORISSA PAN of Size 580x440mm white glazed ware of approved make with P or S trap comforming to IS 2556 part XII with sand cusion and forming flooring around the closet using 40mm broken brick jelly concrete 1:2:5 100mm thick and finishing the top to required slope including cost of all materials lead lift etc complete. (1set)

Supplying and fixing in position PVC Nahini Floor Trap of approved make and quality and size 100X75mm fixed over a bed of brick jelly lime concrete and finised with CM 1:3, and fixed stainless steel grating including the cost of all materials, labour, lead, lift, T&P etc. complete.

Supplying and fixing of 110 mm dia PVC pipe including PVC bend, Elbow wherever necessary, all cost of materails lead lift, labour etc complete.

White Washing one coat with shell lime including the cost of all materials, labour, lead, lift, T&P etc complete

Colour washing two coats with using Emulsion paint over one coat of white cement primer for inside the room wall including cost of all materials labour lead lift etc complete.

Painting 2 coats of approved quality of enamal paint over a primary coat for all exposed faces of new / old steel doors & windows and grill etc including cost of all materials, scrapping, labour, lead, lift etc complete.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials lead lift cost of binding wire etc complete.

Supplying and fixing Pre cast RCC 1:1.5:3 slab for man Hole Cover including all cost of materails lead lift etc complete.(exculding Steel reinforcement)

GST 12% as per Govt. Norms

Sp Constructions

SST AND CO