REPAIR AND POLISHING OF VARIOUS TYPES OF STEEL / WOODEN FURNITURE MISC ARTICLES AT UNIT 371, 52 SUPPLY ASC, MH AND NAGPUR UNITS UNDER GE KAMPTEE

Amount

CHAIR VARANDAH FD-1031,359

Removing of old cane from chair varandah steel (bottom and back) and re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed.

M&L for painting to frame of chair varandah with white synthetic paint after preparation of surface (after removing the old cane) complete all as specified and directed.

M&L for gas welding to frame of chair varandah including preparation of surface and removing the unwanted welding spot complete all as specified and directed.

S&F in replacement of unserviceable portion of frame of chair varandah with 20mm conduit pipe of wall thickness 1.60mm duly gas welding complete all as specified and directed.

S&F in replacement of hard rubber shoe to the leg of chair varandah of standerd approved quality complete all as specified and directed.

TABLE OFFICE STEEL (CLERK/STEEL) FD-1003/FD-1004

Removing of old unserviceable legs made of MS conduit/square pipe and supply & fixing new legs made out of MS conduit/square/pipe of size 25mm dia and 1.6mm wall thickness complete all as specified and directed.

Removing of old unserviceable drawers with telescopic channel and lock 6 lever complete and supply & fixing new MS drawers made out of 1mm thick MS sheet with lock of 6 lever, drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be fixed in the table complete all as specified and directed.

Removing of old unserviceable drawers cabinet shutter and supply & fixing new MS cabinet shutter, shutter made out of 1mm thick MS sheet with groove duly covered with pvc to pull the shutter out complete all as specified and directed

Removing of old unserviceable Pre-laminated particle board top of clerk table and supply & fixinh new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and directed.

Material and labour for welding to broken joints of frame of table complete all as specified and directed,

Supply & fix in repair of hard rubber shoe to the leg of table of standard approved quality complete all as specified and directed.

ALMIRAH LARGE STEEL WITH SHELVES FD-67(M), FD-1031(M), DB-4049:-

Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made to shape as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

ALMIRAH SMALL STEEL WITH SHELVES FD-1032 :-

Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per give in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed.

GI PIPE CHARPOY NEWAR INTO GI PIPE PLYTOP FD-220(M), 227

Removing of old unserviceable plytop / newar from GI charpoy and supply & fixing two Nos stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail. The stiffners shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make : Prakash/Surya)

Removing old unserviceable plywood from charpoy plytop and welding of old broken stiffners pipe and re-fixing plywood in charpoy complete all as specified and directed.

Removing of old unserviceable long rails having both threaded broken end and supply & fixing new long rail made out of GI tubing 32mm bore mediam grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed.

Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and supply & fixing new short rails of GI charpoy obtained from Srl Item No 5.3 above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed.

Removing of old unserviceable leg and supply & fixing new leg made out of short rail of GI charpoy obtanied from Srl item No. 5.4 above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing.

Removing of old unserviceable GI elbow three way and supply & fixing of new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed.

Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed.

Supply & fixing new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed.

TABLE BED SIDE FD/E-6/MAP/15(R)

Removing Old unserviceable top 18 mm thick prelaminated particles board exterior grade and supply & fixing new top including PVC beading all round as per drawing and directed.

Removing old unserviceable sides 18 mm thick prelaminated particle board exterior grade and supply & fixing new sides including PVC beading all round as per drawing and all as directed

Removing old unserviceable top back 18 mm thick prelaminated particle board exterior grade and supply & fixing new top back including PVC beading all round as per drawing and all as directed

Removing old unserviceable drawers and supply & fixing new drawers (including necessary T/W runner ) as per drawing all as directed .

Removing old unserviceable back 6 mm thick plywood and supply & fixing new back 6 mm thick BWR plywood as per drawing and all as directed.

Removing old unserviceable hard rubber shoes of table bed side and supply & fixing in replacement of hard rubber shoes of table bed side all as per drg and as directed.

M & L for painting of frame of table bed side with two coats of synthetic enamel black paints including welding where required and preparation of surfaces all as directed.

LOCKER BED SIDE STEEL:- FD-1029

Removing of old unserviceable hasp and staple and supply & fixing of new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable leg of size 600mmx80mmx100mm and supply & fixing of new leg of size 600mmx80mmx100mm made out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed.

BOOK CASE STEEL (GLASS DOOR) FD-1028, FD-237, WDF-2, FD-90(M)

Removing unserviceable MS channel and supply and fixing new MS channel complete including necessary welding and roller all as per drawing and as directed.

Removing unserviceable 3 mm thick plain glass with cleat stopper and S&F new 3 mm plain glass with iron cleat stopper all as per drawing and as directed

Removing unserviceable sliding shutter and supply and fixing new sliding shutter of 1 mm thick MS sheet including glass , lock and two handles all as per drawing as directed.

Removing unserviceable locks and supply and fixing new lock with duplicate keys as per drawing and as directed

Removing unserviceable handles and supply and fix new handles of 100 mm all as per drawing and as directed

Removing unserviceable shelves and supply and fix new shelves of 1 mm thick MS sheet with existing matching colour all as per drawing and as directed

M & L for preparing old painted steel surfaces of steel by removing dents and bends , cliping ,welding to damaged sheet and applying one coat of synthectic enamel paint 1st quality OG/Gray/Cream/Light Cream paint inside and outside painting all as specified in particular specification and as shown on drawing as as specified and directed.

CHAIR CBA OFFICE STEEL WITH ARMS:- FD-75(M)

Dismantling of existing UNSV seat of chair CB office steel with arms and supply and fixing new seat of teak wood duly canning with plastic cane 2mm wide half round providing 3mm wide flat cane border around the seat and french polishing in black Colour on wooden surface all as approved and as specified and shown in drg canning shall be done in Godrej pattern

All as item No. 9.01 above but back of chair.

Dismentling of existing UNSV broken cleats and supply and fixing of new MS flat Iron 25x3mm and 535mm long two Nos by welding all as directed and specified and shown in drg.

Removing of Old/UNSV armrest and supply and fixing new arms rest of seasoned teak wood duly french polish in black colour etc all as approved by Engr-in-Charge and as specified and shown in drg.

Repainting of steel frame with one coat of OG synthic enamel paint after scrapping/cleaning surface by sand paper for smooth painting as directed.

Supply and fixing PVC new Plug of approved quality for to chair tubular steel after removing existing UNSV.

TABLE DINING ORs ALUMINIUM TOP FD-165M

Removing of old unserviceable plywood, top of table dining ORs and supplying and fixing new 18mm thick commercial plywood top and covered with 1mm thick aluminium sheet complete all as specified & directed and as shown in drg.

M&L for preparation of old/new table dining ORs aluminium top and polishing of high gloss melamine polish of table dining ORs complete all as specified & directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.77,680.00]

Budget Furniture Industries

SARGAM ENTERPRISES

dhanshree enterprises

H.M Traders

Mahesh Traders

Krishana electronics

Apsara Industries

Bidder Name

Mahesh Traders

NIHAL ENTERPRISES

dhanshree enterprises

H.M Traders

Apsara Industries

SARGAM ENTERPRISES

Budget Furniture Industries

Krishana electronics