(PARSHAD NIDHI) 25-26 Construction OF COMMUNITY HALL WORK AT HARIKHEDA Ward No. 60, Zone 14, file No. 295/25X3/3.

Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth levelCement concrete grade M-10 (Nominal Mix) with 40 mm maximum size of stone aggregate

Random rubble masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc. 5.2.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor two level excluding the cost of centering, shuttering and reinforcement with Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : 19.1.1 Foundations, footings, bases of columns, etc. For mass concrete

Centering and shuttering including strutting, propping stretching et19.1.3 Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Thermo-Mechanically Treated bars. (Fe 500 D or more)

Brick work with chimeny brick of class designation 40 in superstructure above plinth level upto floor 2 level including the cost of scaffolding in : Brick work with chimeny brick of class designation 40 in superstructure above plinth level upto floor 2 level including the cost of scaffolding in :

2 Brick work with well burnt chimney bricks in bulls patent trench kiln ,crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth cement mortar 1:6 (1 cement : 6 coarse sand

12 mm cement plaster of mix 13.1.2 1:6 (1 cement: 6 sand)

15 mm cement plaster on rough side of single or half brick wall of mix 13.2.2 1:6 (1 cement: 6 sand)

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Moorum/Hard copra

62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete grade M-15 (Nominal Mix with 20mm maximum size of stone aggregate) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing and laying vitrified floor tiles (without Soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm as per manufacturer specification.

13.25 Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.

13.39 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new wor

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.110 mm diameter OD

10.3 Providing and fixing in position collapsible steel shutters (Channel Gate) with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6 mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rates includes recess cutting in floor and making good the same where ever required

"LIGHT POINT/FAN POINTS.SHORT POINT-""WIRING IN CONCEALED RIGID PVC CONDUIT (HEAVY DUTY) SYSTEM WITH FLUSH TYPE ACCESSORIES.POINT WIRI NG INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHES, SOCKETS, LAMP HOLDERS/CEILING ROSES ETC WITH 1.5 SQ. MM. PVC INSULATED CABLE FR W ITH COPPER MULTI STRAND CONDUCTOR ISI MARKED IN CONCEALED RIGID P.V.C. CONDUIT (HMS) ISI MARKED OF SUITABLE SIZE AND 1.5 SQ. MM. PVC INSULATED COPPER EARTH CONTINUITY CONDUCTOR OF GREEN COLOUR INSIDE CONDUIT INCLUDING PAINTING ETC. AS REQUIRED AS PER SPECIFICATION FOR :-"""

PRIMARY MEDIUM POINT

primary long point

" 3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARD SHORT POINT-""WIRING IN CONCEALED RIGID PVC CONDUIT (HEAVY DUTY) SYSTEM WITH FLUSH TYPE A CCESSORIES.POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHES, SOCKETS, LAMP HOLDERS/CEILING ROSES ETC WITH 1.5 SQ. MM. PVC INSULATED CABLE FR WITH COPPER MULTI STRAND CONDUCTOR ISI MARKED IN CONCEALED RIGID P.V.C. CONDUIT (HMS) ISI MARKED OF SUITABLE SIZ E AND 1.5 SQ. MM. PVC INSULATED COPPER EARTH CONTINUITY CONDUCTOR OF GREEN COLOUR INSIDE CONDUIT INCLUDING PAINTING ETC. AS REQUIRED AS PER SPECIFICATION FOR :-"

medium point

long point

"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHES, SOCKETS FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM. PVC INSU LATED CABLE FR WITH COPPER MULTI STRAND CONDUCTOR ISI MARKED IN CONCEALED RIGID P.V.C. CONDUIT (HMS) ISI MARKED OF SUITABLE SIZE AND 1.5 SQ. MM. PVC INSULATED COPPER EARTH CONTINUITY CONDUCTOR OF GREEN COLOUR INSIDE CONDUIT WITH REQUIRED MATERIALS AS PER SPECIFICA TION ON SAME BOARD."

CIRCUIT WIRING 2X2.5 SQ.MM.-"CIRCUIT WIRING.WIRING FOR CIRCUIT WIRING WITH PVC INSULATED CABLE FR WITH COPPER MULTI STRAND CONDUCTOR ISI MARKED IN CONCEALED RIGID P.V.C. CONDUIT (HMS) OF ISI MARKED SUITABLE SIZE INCLUDING PAINTING ETC. AS REQUIRED AS PER SPECIFICA TION"

6X2.5 SQ.MM.

SHORT POINT ON SEPARATE BOARD-"POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY) SYSTEM WITH FLUSH TYPE ACCESSORIES. POINT WI RING INCLUDING METALLIC SWITCH BOX, SHEET, FOR 3 PIN 16 AMP. SOCKET OUTLET POINT WITH 4 SQ. MM. PVC INSULATED CABLE FR WITH COPPER M ULTI STRAND CONDUCTOR ISI MARKED IN SURFACE RIGID P.V.C.CONDUIT (HMS) ISI MARKED OF SUITABLE SIZE INCLUDING PAINTING ETC. WITH 16 AM P. F.T. SWITCH & SOCKET / S.S.COMBINED 16 AMP. OF ISI MARKED AND 4 SQ. MM. PVC INSULATED COPPER EARTH CONTINUITY CONDUCTOR OF GREEN COLOUR INSIDE CONDUIT AS PER SPECIFICATION FOR :-"

MEDIUM POINT.R :-"

LONG POINT.

Supplying and fixing PVC conduit ISI marked along with the accessories in concealed system etc. as required

4 MODULE-"SUPPLYING AND FIXING OF APPROVED MAKE MODULAR TYPE METAL BOX WITH MODULAR FRAME/ BASE PLATE AND COVER PLATE INCLUDING FIXI NG IN CONCEALED / SURFACE EXCLUDING SWITCH,SOCKET ETC. AS REQUIRED FOR:- (MODULAR SWITCH BOXES)"

12 MODULE

1 X 1.5 SQ MM-"CIRCUIT WIRING IN EXISTING CONDUIT / PVC CASING CAPPING. 1.5 SQ MM CABLE SUPPLYING AND DRAWING SINGLE CORE PVC INSULA TED CABLE FR WITH COPPER MULTI STRAND CONDUCTOR ISI MARKED IN EXISTING RIGID CONDUIT IN SURFACE OR CONCEALED AS PER SPECIFICATION."

1 X 2.5 SQ MM-

2 X 2.5 SQ MM-"

200 AMPS. 415/500 VOLTS.( OFF LOAD )-"SUPPLYING OF ISI MARKED CHANGE OVER SWITCHES IN SHEET ENCLOSER CONFIRMING TO IS : 4064 / IS : 13947 (PART I & III ) WITH SIDE HANDLE OPERATED 4 POLE WITH TWO EARTHING TERMINALS 200 AMPS. 415/500 VOLTS.( OFF LOAD )"

6 AMP TO 32 AMP RATING-"SUPPLYING OF ISI MARKED AND ACCEPTED STANDARD OF MINIATURE CIRCUIT BREAKER (MCB) OF 'C' SERIES SUITABLE FOR 240/415 VOLTS, 50 CYCLE , 10 KA VALUE AC SUPPLY CONFIRMING TO IS : 8828 : 1996, IEC : 60898 :2002 BUT WITHOUT ENCLOSURES :- SINGLE P OLE (SP)"

50 AMP TO 63 AMP RATING FOUR POLE(FP)-"SUPPLYING OF ISI MARKED AND ACCEPTED STANDARD OF MINIATURE CIRCUIT BREAKER (MCB) OF 'C' SERIE S SUITABLE FOR 240/415 VOLTS, 50 CYCLE , 10 KA VALUE AC SUPPLY CONFIRMING TO IS : 8828 : 1996, IEC : 60898 :2002 BUT WITHOUT ENCLOSU RES :- FOUR POLE(FP))"

12 WAY DOUBLE DOOR-"SUPPLY OF APPROVED MAKE POWDER COATED SHEET STEEL ENCLOSER SPN MCB DB INCLUSIVE OF BUSBAR, NEUTRAL BAR, EARTH BA R & TWO EARTH TERMINALS ETC. COMPLETE AS PER IS:13032( EXCLUSIVE OF MCB & ISOLATOR)-"

"FOR S.NO :- 8.5(6) & 8.5(7), 8.6(5) TO 8.6 (7) 8.7(2) & 8.7(3) & 8.8(1) TO 8.8 (3)"-"LABOUR CHARGES FOR FIXING SHEET STEEL ENCLOSUR ES, MCB DB SURFACE MOUNTING TYPE,AS PER ACCEPTED PRACTICE ON 25X25X 5 MM ANGLE IRON CLAMP,INCLUDING SUPPLYING AND FIXING OF CLAMPS D ULY EMBEDDED IN WALL,CABLE CONNECTION ETC. COMPLETE :-"

100 Watt (socket type) Supplying and fixing of approved make step type electronic Fan regulator including connection etc. as required on existing board

CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP-"SUPPLYING, ERECTION AND TESTING OF APPROVED MAKE ELECTRIC CEILING FAN OF DOUBLE BALL BEARING COMPLETE WITH STANDARD DOWN ROD, CANOPY, HANGING SHACKLE, ALUMINIUM BLADES, WITHOUT REGULATOR, A.C. 230-250 VOLTS INCLUDING CONNECTIONS WITH ALL NECESSARY MATERIAL COMPLETE AS REQUIRED CONFIRMING TO IS :374/1979 WITH UPTO DATE AMMENDMENTS."

225MM SWEEP-"SUPPLYING, ERECTION AND TESTING OF APPROVED MAKE 'FRESH AIR FAN' AC 230- 250 VOLTS WITH CONNECTION AND INCLUDING FRAME BOLT/ANCHOR HOLE FASTENERS ETC. COMPELTE FINISHED AND AS REQUIRED."

Tube light LED 1x20/22 watt integral i/c batten aluminium body, PC diffuser

Supplying, Fixing in Position LED lamp of approved make

Please Enable Macros to View BoQ information