SPECIAL REPAIR TO BLDG NO ASC 02 STATIC WORKSHOP EME MHOW UNDER GE AWC MHOW

Amount

Taking down shutter of any description n exc. 1 Sqm each complete.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4.0 sqm with shutter (without taking off shutter frome the frame )

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in hold fasts, benching including necessary use and waste of form work complete all as specified and directed.

M&L preparing surfaces of wood and wood based materials , steel and iron work , new or old , of any description and girth, not otherwise described , and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc.'area tarred n exc 0.1 sq.m each with tar or coal tar black paint all as specified.

S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed.

S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as in windows and ventilators as specified in SSR Part-I, section 8, clause 8.24 (b) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

M&L for 2nd class hard wood plain fillet sqaure, rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 & nexc 25 sqcm complete all as specified and directed.

S & F 100 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S & F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete

S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed

S & F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ beads in square not exc. 0.5 sq m in each pane complete.

S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with and incl tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm complete

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ) complete all as specified.

M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

M & L Preparation of Old wood painted surfaces of any description , not otherwise description, over 10 cm width or grith apply one coat of synthetic enemel paint (ordinary tint) complete all as specifed and directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, ceiling etc including raking out joints , hacking for key , scrubbing down with water at any height etc all as specified and as directed.

M & L 12 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair complete.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth complete.

M & L 10 mm thick plastering in cement mortar 1:3 on ceiling surfaces on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparation newly plastered surfaces and applying 3mm thick of Birla White Wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

M & L for complete removal of existing treatment and applying 3mm thick of Birla White Wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old wall surfaces and applying one coats of coloured acrylic water emulsion paint as per the manufacturer's instructions complete all as specified and as directed (Make :-Apex Ultima,Nerolac (Excel Total) ICI Dulux (Weather shealed max) or equivalent.

M & L preparing of newly plastered surfaces of wall , pillasters, cornices etc and applying two coats of coloured acrylic water emulsion paint over a coat of precoated treatement as manufacturer instruction complete all as specified. Make acrylic water emulsion paint Asian (Apex Ultima) or Nerolac (Excel Total or weather shield max (ICI Dulux.) Make of Primer :- Asian (X2).

M & L preparing old decorated plaster or un-plastered surfaces of ceiling & wall and applying two coats of white wash complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. Note :- Tiling shall be as in patches or of any size or any description , any colour, any location or all as directed .

M&L glazed ceramic coloured tiles, 300mm x 200mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed

M&L Brick work with fly ash modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Dismantling PVC water tanks Exc 500 ltrs but not 1000 ltrs and removing from the site.

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I complete all as specified and directed

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

S & F in repairs vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. Note :- Pillar tape shall be measured as supply only under respective item

Taking up or down existing 15 mm dia steel tubing and connection and removing complete.

Taking up or down existing 20 mm dia steel tubing and connection and removing complete.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete.

S & F in repair 25mm dia Powder coated curtain rod fixed with modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

S & F in repairs PVC connection 15 mm dia 450 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F( in repairs) Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. Make plumber or equivalent.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply only 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete. Make : Plumber or equivalent .

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. (Make : Plumber Cat No IT - 1904 ITALIAN / Marc/Jaquar)

S&F in repair CP Soap Dish with ABS dish Holder, complete all as specified and directed by Engineer-incharge. MAKE:- Plumber Cat Part No. U-0913/Jaquar/Marc complete all as specified and directed.

S&F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. Make:- Plumber Cat Part No. U-0916/Jaquar/Marc complete all as specified and directed.

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507/Jaquar/Marc complete all as specified .

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.. Make : Plumber Cat part No FLP-0203/Jaquar/Marc complete all as specified and directed.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make : Plumber Cat part No U-0911/Marc/Plumber complete all as specified and directed.

S & F in repair swivel shower rose of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe or union Make: Plumber Cat part No. ITP-2101 complete all as specified and directed

S & F(in repair) 15 mm dia bore chromium plated concealed stop cock, complete. Make : Plumber Cat Part No. FLP-0405 complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in wall complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as directed.

Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings complete.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S&F pre painted galvalume aluminium zinc coating steel based plain steel sheet 0.50 mm thick of any colour having rensile strength of 550 Mpa as in roof/covering/cladding to wall, fixed with self tapping screws all as specified and as directed at site complete all as specified and directed.

S & F Joist, channel, angle or tee , square or rectangular, tubler sections, fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A) complete all as specified and directed.

M&L 10mm thick plaster in one layer in CM (1:4) over concrete roof padding/wall surface, cement mortar mixed with and including WPC as per manufacturers instruction.(Note- WPC Shall be measured and paid separately) complete all as specified and directed.

M & L water proofing treatment on roof surface in following steps through manufacturer / authorised applicator of the manufacturer instructions complete :- (i) wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction parapets, etc, and surface painting, with a layer of blown bitumen of any preparation applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered (area of flashing etc shall be added to the roof area) (ii) Laying APP based polymeric membrane minium weighing 3 kg/sqm and minium 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat .

Demolition and breaking up drain pipe 150mm (SGSW pipe or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for salt glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches joint in CM 1:1 and testing complete all as specified and directed.

M&L PCC 1:4:8 tyep D2, using 40mm graed stone aggregate as in bed of drain pipes of 150mm bore including packing under & haunching agaunst the sides of pipes after they are laid & tested, complete all as specified and directed.

M & L Pre-cast reinforced cement concrete Type B-1, 1:2:4 20 mm graded stone agg as in cover slabs ( for manholes etc) chullah hoods RCC 1:2:4 type B-1 nominal mix as in manhole cover complete all as specified and directed.

M & L for TMT reinforcement bars 6-8 mm dia including all cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.9 mm dia, complete all as specified and directed

S & F 125mm X60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness including cover fillets complete.

S & F anodised aluminium sanp grid frame work of size 605mm x 605 mm for flase ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessary arrangements complete all as specified and directed.

M & L 12 mm thick Gypsum Board as in ceiling or wall penalling fixed with screws as per manufactur's instructions complete all as specified and directed.

M&L for 2nd class hard wood plain fillet square, rectangular ot triangular in section clean sawn secured with nails or brads sectional area nexc 3 sqcm complete all as specified and as directed

M&L for prelaminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and otherside balancing white lamination fixed with screws to timber frame work complete all as specified and as directed

Taking down shutter resecuring or easing and refixing in the same opening shutters of any description exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and as directed

M&L for preparation of old painted surfce of ceiling and applying one coat of distemper complete.

Excavation over areas in any type of soil nexc 1.5m deep and getting out complete all as specified and as directed

Ditto all as per item No (97) above but exc 1.5 m but n exc 3.0 m depth

Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point complete all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 crushing 40mm graded crushed stone aggregate) as in sub floor, Sub base etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work including attached pillasters, buttresses etc vertical or to batter complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete.

M&L for brick work with FLY ash Bricks modular size straight or curved on plan to any radiusin half brick thick wall built in cement mortar 1:4 complete all as specified.

M&L for honey comb brick work with FLY ash Bricks modular size straight or curved on plan n exc 6m mean radius built in cement mortar 1:4 complete all as specified.

M&L broken bricks Loosing filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed

Supply only integral water proofing compound complete.

Material and labour RCC type B1 1:2:4 nominal mix in roof slab etc using 20mm graded curshed aggregate complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth complete.

M&L Brick work with fly ash modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including taking down carefully copper/alluminium point wiring light, fan, sockets and all fittings and accessories complete all as specified and directed for the following :-

One light / fan /bell controlled by one, one way switch 5/6 Amps

One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

One light point controlled by two way switch 5/6 Amps

Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including taking down carefully copper/alluminium power point wiring , switches and sockets complete all as specified and directed .

Supply and fixing modular metal flush box 1 module complete all as specified and as directed

Supply and fixing modular metal flush box 3 module complete all as specified and as directed

Supply and fixing modular metal flush box 4 module complete all as specified and as directed

Supply and fixing modular metal flush box 6 module complete all as specified and as directed

Supply and fixing modular metal flush box 8 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 1 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 4 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular switch 2 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S/F modular bell push type 6 A ,1 module complete all as specified and directed.

S/F bell multi music type AC 230 volts single pole complete all as specified and directed.

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Havells cat part No :-LUMILINEPLUSBS 20WLED865SPCSS / /Bajaj Cat part No:-BCLSB20WH / Philips Cat Part N0:-BN021CLED20S PSU CW GR S2

Supply and fixing wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED fitting 2 feet long complete all as specified and directed.Havells cat part No- cat No :-LUMILINEPLUSBS 10WLED865SPCSS / /Bajaj Cat part No:-BCLSB10WH / Philips Cat Part N0:-BN021CLED10 S-6500PSU GR S1

S & F LED bldg security light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells , code no ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC /Bajaj Cat part No:-BCLST 30W LED I / Philips Cat Part N0:-BRP046 LED 30 CW MR S1 PSU GR

Supply and fixing angle holder with cord grip cap complete all as specified and as directed

Supply and fixing LED NU bulb 12 watt complete all as specified and as directed

S MCCB ,DB wall mounted VTPN with provision for facility to provide MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing 6 way double door including removing old DB with MCCBs and MCBs , fixing the new DB and wall finising complete all as specified and as directed. Make : L&T Cat No :-DBVTM006DD/HPL Cat pt No- DBVDD06160TAB / Indo Asian Cat part No: 811871

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity including removing old DB with MCBs , fixing the new DB and wall finising complete all as specified and as directed Make : L&T Cat No :-DBSPN008DD /HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811807

S&F MCCB 3 pole 415 V 125 A 50 Hz with rupturing capacity 25KA. Make : L&T Cat No :-CM90631OONO HPL Cat pt No- TAB250CX160AC3P / Indo Asian Cat No-830290

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TDPC40 / Indo Asian Cat No-811152

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129

Supply and fixing TV socket outlet complete all as specified and as directed

Supply and fixing sub main wiring with 2 single core 6 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed.

Taking out existing Single phase electric energy meters of any capacity and size and disconnecting all electrical connections and Deposited to MES store Yard complete all as directed

Supply and fixing ply board size 600 mm x 600 mm x 12 mm including cutting opening of windows for fixing of exhaust fan 250 mm sweep complete all as specified and as directed.

S&F in replacement of exhaust fan single phase 230 volt of size 250 mm sweep with louver all as specified and as directed Make :- Bajaj Model -Maxima DX / Havells , Model- Venti Air DX / Crompton , Model:- Brisk Air

Supply and fix Sheet metal enclosure, SPN, with two pin and earth metal plug and socket, 20 Amps, 240 Volts, including one MCB SP 20 Amps complete all as specified and as directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply and fix Ac 3 phase static Energy Meter of Accuracy class I ,3x 240 Volt ,50 Hz with Backelite LCD Display of rating 5-20 Amps with transparent hinge type box complete all as specified and as directed. Make :- HPL Cat No-TPPL12100000020CNO / L & T Cat No:-WM301BC4D20

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation ,laying of cable or pipe ( where provide for protection of cable or fixing poles and stay and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed.

Material and labour for approved river sand cushioning for under ground cable in trenches 8 cm before laying and 15 cm after laying of cable and punned thickness of sand shall be measured and paid for 18 cm only after punned/consolidated thickness complete all as specified and directed.

Supplying and laying reinforced precast concrete cable cover, class LV, type 1 flat , size 250mm x 150mm x 40mm complete all as specified and directed. (Make: Mahtab tiles / Alankar Tiles/Pearlers Industries/SIND Mozaic Gujrat/JJ Concrete Lucknow).

Supply, laying and testing cable XLPE Insulated , screened , PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 35 sqmm 3.5 core all as specified and as directed

Supply and lay pipe galvanized , light class 40 mm dia including fitting complete all as directed.

BHATIA ASSOCIATES

Jamna Constructions

M/S Ashish Construction

Bharadwaj Builders