Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 CrAccepted-Finance | ₹21.1 Cr | L1 | Accepted-Finance L1 |
| 2 | L2₹23.0 CrAccepted-Finance 13 SAINATH NEW COLONY NAGPUR 440001 | NAGPUR | NAGPUR | MAHARASHTRA | 440001 | ₹23.0 Cr | L2 | Accepted-Finance L2 |
| 3 | L3₹23.1 CrAccepted-Finance 404 405 GOMATI APT 4TH FLOOR LAW COLLEGE SQ WHC RD DHARAMPETH NAGPUR | NAGPUR | MAHARASHTRA | 440001 | ₹23.1 Cr | L3 | Accepted-Finance L3 |
| 4 | Rejected-Technical | - | - | Rejected-Technical Rejected As Per technical Documents |
| 5 | Rejected-Technical 802 IMPRESSA RISE 8 AMBAZARI ROAD OPP LAD COLLEGE SHIVAJI NAGAR NAGPUR 440010 | NAGPUR | MAHARASHTRA | 440010 | - | - | Rejected-Technical Rejected As Per technical Documents |
Tender Value
Refer Docs
EMD Value
₹12.8 L
Closing Date
26 Dec 2025, 4:00 pmClosed
Executive Engineer Project 1
NMC Civil Lines Nagpur
Development of Healthy Streets in Shankarnagar and Dharampeth ares of Nagpur city as per Urban Street Design Guidelienes.
2025_NMCN_1258332_1
16/2025-26/EE/Project-1
Open Tender
Civil Works - Others
540 days
Nagpur City
As per Tender Documents
2 documents required · 2 mandatory
₹3,540
₹12.8 L
Honble CE Office
5 Feb 2026
12 Dec 2025
29 Dec 2025
12 Dec 2025
26 Dec 2025
12 Dec 2025
12 Dec 2025 - 16 Dec 2025
16 Dec 2025
Cutting down branches of trees , bushes etc. stacking the material neatly as directed (For Motarable Road. As directed by Engineer in - charge
Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately.
Taking the trial pit for roads, alignment, C.D.Works in Hard murum,and Boulders including stacking the excavated material including all and necessary back filling upto depth 1.5 meters. As directed by Engineer in charge
Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. As directed by Engineer in charge.
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.
Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. And spreading for embankment or stacking as directed.
Transportation of Material obtained from debries of various sorts includingnecessaryexcavation/loosingincludingloading,unloading and conveying and disposing as directed. NSR j) For 10 KM
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete
Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 m. including all lifts, laying in layersof 20cm. to30cm. thickness breaking clods, dressing to the requiredlines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc.complete (Material obtained from Other sources)
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC,carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause401-- Plant Mix Method and Grading - I Material
Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)
BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1,premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant asper IRC- 27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder, built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete--Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates
BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50 mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/ Tack coat etc. complete- Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)
Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry/Hungry B.T. surface 3 Kilogram/10 Square Metre. (VG-30 bulk bitumen rates are considered to arrive at rates)
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /mediummarket roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportationof blocks towork site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of VSI crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice asspecified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloadingand stacking as directed, laying paving blocks in position over prepared bed of VSI crushed sand of 50mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed,compacting blocks by plate vibrator etc. complete.
Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and constructing B.B.Masonry chamber with 100 mm thick 1:3:6 P.C.C. for bed on 100 mm thick oversizer soaling with 80 mm metal including excavation, 23 cm thick B.B.Masonry in c.m.1:6. Inside plaster in c.m.1:5 20 mm thick and outside plaster SSR item No 1138 (B)- Non CSR item. size-C)1200 x 900 x 450 mm
Add For Extra Depth 150 mm
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with microprismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 Kilogram tested in accordance to ASTMD 4280 Type Hand complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt11.06.1997. The height, width and length shall not exceed 50mm,100 mm and 102+/-2mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks,(of diameter not less than19+/-2mm and height not less than30+/-2mm) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glassbeads @250gms per SquareMetre area, thickness of 2.5mm is exclusive of surface applied glassbeads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.
Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of mm made out of mm aluminum sheet bonded with white retro reflective sheeting of Class C (Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols, letters,numerals,arrow as per IRC:67-2012 Table No8.3 Supported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stove enamel paint and supported on one Number of M.S.angle iron post of size 65mmX65mmX6mm, 3.45m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cmX60cmX75 cm including transportation etc;complete. Class C (Type XI Microprismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed are as and cut- out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier f) 900 mm made out of 4mm aluminum composite material
Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 One Square Meterr made out of 4 mm aluminum composite panel bonded with 0.5 mm skin thickness on either side with white retro reflective sheeting of Class C ( Type XI Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. ClassC_ ( Type XI Type XI Micro prismatic grade sheeting) sheeting shall have 10 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier.
Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. a. 600 mm dia made out of 3mm aluminum composite material with 0.25 mm skin thickness on either side
b) 600 mm dia made out of 3mm aluminum composite material
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat).
Providing and fixing precast tapering kerbs of M-20 (Single tapered divider) as per the detailed drawing filling in joint by cement Mortar 1:2 Cement pointing and curing, including excavation upto depth of 0.25m,PCC-M10 is upto 0.12m and painting exposed faces with one coat of road marking paint of approved col
Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. Upto 900mm dia. etc complete.
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.
Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/ laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 80mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern.
60 mm Shot blasted blocks Providing & laying of 60mm thick non slippery concrete paving blocks as per the IS 15658-2006 with face of block. The block should have exposed aggregate, be shot blasted with colour UV stabilized and made from rich oxides and guarantee by manufacturer. Block to be manufactured in fully automatic ISO certified vibration compaction machine having strength of M-40 & cured in controlled temperature through mist and fixing on site with all grit material and labour included.
Providing and laying tactile tile (for vis impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coars sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc complete as per direction of Engineer-in- Charge.
Supply & Fixing precast cement concrete cylindrical Bollard of size (as por dotaild drawing attached) & 950mm height (650mm above finish level of 150mm Diameter manufactured by M-30 grade of Concrele (with VSi quelty standard Artificial Sand) by vibro compaction process using FRP moulds & painting with approved weather sheild paint of approved colour & texture, single & Double groove cut inside of 10mm width and 75mm wide placed at 150 mm from top finish (Reflective fluorescent tape should be sticked at 75mm grooved placed) as per detal drawing as directed by engineer in charge, including transportation Loading, unloading and including all other taxes and excluding GST
इन्टरलॉकींग ब्लॉक्स काढून परत बसविणे. १:२ प्रभागातील चाळलेल्या बाळूचे नॉर्टरमध्ये रंगीत ये अस्तित्वातील हींग लॉस काढून बसविणे, दवाई केलेल्या गुरुनाच्या पृष्ठभागावर ५० जाडीया बालूचा ग्रीटचा थर पसरविणे, स्त्री व्हायब्रेटरचे दवाई लेव्हल करणे, दवाई केलेल्या बाळूच्या पृष्ठभागावर पेव्हींग पिस वसवून दर्जनध्ये - चाळलेली रेती भरणे, तसेच फर्लांग लगतच्या पेव्हींग ब्लॉक्स वगयामधील मध्ये १:१ सिमेंट नॉर्टरमध्ये दर्जा भरणे, व्हायब्रेटर/कॉम्पॅक्टरच्या सहाय्याने दवाई करणे, पाणी नारणे, सर्व साहित्य नटेरियल लीड लिफ्ट सह पूर्ण सदर ब्लॉक्सच्या आवश्यकतेनुसार गुणनियंत्रणाच्या चाचण्या येणे आवश्यक आहे
Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete.
Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.
providing & fixing Precast-Concrete Grating for Tree Girth of 30 Cm to 60 Cm Section of Size maximum 1500 x 1500 x75 mm thick machine moulded steam cured cement concrete perforated slab for tree guard layed over crushed gravel and crush stone in FRP having circular opening as per requirement on site as per detailed drawing & specification, and as directed by Engineer in Charge
Providing and laying D.W.C. (Double Wall Corrugated) pipe 300mm dia. made from HDPE material & as per IS 14930 Part II Specification. Brand name - Eleteks etc.
L type Kerb: Providing & fixing Reinforced precast-L shape kerb stone Using 6 mm steel bars 4 number along the kerb length and 8 mm steel bar 500 mm c/c vertical reinforcement , M-30 grade concrete with dimensions 350 mm high,125 mm thick with built in base of 187 mm x 75 mm, including 2 numbers of 50 mm dia sleeves for services at the top of the base & with top external edge with rounding of 20 mm radius in highly superior quality surface & edge finish in 1 meter length & Painting as per direction of Engineer - in Charge. ( Including excavation for kerbing, lead lift and transportation of excavated material, P.C.C. below kerbing)
b vii Providing ISI standard R.C.C. pipes in standard
Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 600mm diameter in proper line, level and slope etc. complete.
lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. Note: Only 85% rate is payable till satisfactory hydraulic testing is given. The Bidder shall procure RCC pipes and chamber covers from following suppliers 1) M/S Sneh Precast 2) M/S Kalokhe pipes and precast industries 3) M/S Poona Concrete Company If bidder wish to supply RCC pipes and chamber covers other than above suppliers, then it is mandatory to take approval of supplier from concern department. Third party inspection of RCC pipes and chamber covers is mandatory and should be witnessed by EIL/IR CLASS/SGS. The cost of third party inspection should be borne by contractor. Class ‘NP-III' 300 mm
a vii Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. Note: Only 85% rate is payable till satisfactory hydraulic testing is given. The Bidder shall procure RCC pipes and chamber covers from following suppliers 1) M/S Sneh Precast 2) M/S Kalokhe pipes and precast industries 3) M/S Poona Concrete Company If bidder wish to supply RCC pipes and chamber covers other than above suppliers, then it is mandatory to take approval of supplier from concern department. Third party inspection of RCC pipes and chamber covers is mandatory and should be witnessed by EIL/IR CLASS/SGS. The cost of third party inspection should be borne by contractor. Class ‘NP-II' 300 mm
Providing and laying 100 mm dia. Half round white glazed earthenware pipes in 1:5:10 cement concrete bedding including bends, etc. complete.
STAMP CONCRETE STAMP CONCRETE of 100 mm thicki Providing and Laving in-sit M20 C Froviding and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100 mm thickness pavement pren ckhess pavement over a prepared sub base with 43 grade cement. coarse and find aggregate (natural sand VSI BBregate (natural sand l grade finely washed crushed hed sand) Confirming to IS 383, as per m batching and mixing lant g and mixing plant lant / non tilting nixer and weigh batcher as per approved mix design, admixtures trans aumixtures, transporting to Site in nagpur city with lead upto 20km (on Inner Ring Road from Avasti nagar to Wadi), spreading, laying with approved make pover, compacted and finished in a continous operation finichi continous operation, finishing to lines and grades also providing, Placing and applying stamp powder which is light Samp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colo ar compounas of desired colour on base concrete after excess bleed water has evaporated using dry shake method @ 5 ko evaporated using ary shake method @ 5 kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV stable, 30% solids clear sealer @ 150 to 250 gms per sam using surface roll
Providingand laying in situ / readymixM-25 controlled reinforced cement concrete of trapmetal for raft slab including "V" haunches, formwork, scaffolding, compactionby vibrating, finishing curing etc. complete. concrete batch mix plant /pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) etc. complete. (excluding reinforcement). a)RCC Grade with reversible drum type mixer/concrete batch mix plant (pan mixer)
Providing and laying in situ / readymix M20 RCC of trap/ granite/ quartzite/gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic microprocessor based PLC with SCADA enabled concrete batch mix plant /pan mixer with fine agreegates of required specifications (VSI sand finely washed etc . RCC work of Ballast walls & Kerb
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing,cutting,bending,hooking,tyingandlayinginpositionTMT FE 500 steel bars for reinforcement for all RCCworks as per detailed drawings etc. complete.
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers,Object markers)80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x100 mm rectangular or 75 mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawing.
Providing and fixing at work site soft compacted basalt (Nevasa) stone of size 30OX300X50mm for flooring with dressing as directed by engineer in Charge including C.M. bed for 20 mm thick in CM 1:6 vyith filling joints, curing, cleaning loading, unloading, transportation and including all other taxes and excluding GST complete as directed by engineer in charge etc.
Providing and Fixing precast C.C.M-20 Mudda Seating embedded 200 mm below ground level over M-10 PCC finished neatly and redoing the surface as specified and by Engineering in-charge including loading, unloading, and all other taxes excluding GST etc. complete. Using concrete batching and mixing plant with scada complete.
Supplying & Fixing Cobbels stone of size 100x 100x 80mm thick of black color with natural finish & four side machine cut Granite Cobells of different colours & fixing in 1:6 cement morter on an average 80 mm thick cement bed, Gaps in two stones to be filled by 1:3 cement morter & filler of colour cement with sunk pointing and machine cut straight line looks square shape as per detail drawing & specifications & as per the directed by engineer-in-charge including transportation, Loading, unloading and all other taxes and excluding GST.
Designing, executing Artistic painting for bridge landings, pillars, piers, walls and water tanks. To design and execute artistic painting on different concepts like on social subjects, promoting environment awareness and abstract paintings. Agency has to find appropriate location for the paintings. The design concept and location has to be approved from engineer in charge. Branded high quality weatherproof acrylic exterior wall paints should be used. First step is to scrap the walls then apply two coats primer paints and then multi coloring with approved shades as mentioned above. Painting will be done by the skilled artists. Matt finished coat of Polyurethane (PU) should be applied for protecting weathering effect on wall. Rate should be inclusive of designing, executing, scaffolding, material and labour etc complete as per the direction given by engineer in charge and excluding GST with minimum 5 years gurantee.
Ferro cement sculpture: Providing design, art work, fabrication and erecting of ferrocement sculpture of size around and upto 3.90m x 3.00 x 0.9m variation in size upto +/- 5% on skeletal framing in MS rods (6-8mm dia) with weld mesh (1" x 2") on both sides and galvanized chicken mesh fixed over it on both sides, plastering done in 3 layers (8mm, 25mm, 5mm) with curing of each layer. The plastering mortar mixed with water proofing agents (101 LW + Dr. Fixit) and polypropylane fiber (algae tech) curing done for 2 weeks after final plastering. The Water:Cement:Sand (W:C:S) ratio for ferrocement 0.40:1:1.5 by weight. Sand sieve fine sand and cement are first evenly mixed, the required quantity of water added afterwards. The ratio of Cement:Sand is 1:2 to 1:3 by volume and water:cement ratio is 1:3, 0.45 by weight and finsihinfg the sculpture with two coats of exterior acrylic emulsion paint including applying primer coat, including primary structure to provide one piece look including molding and cornices at junction of base structure as per approved drawing including necessary MS fabrication works to support ferrocement structure, necessary scaffolding at all levels and staging etc. complete including cost of necessary machineries for installation, all necessaary accesories, adhesives, hardware, cost of material, labour, transportation, scaffolding, loading, unloading, all types of taxes, all leads and lifts and maintenance upto 1 year from the certified date of completion,etc. Excluding GST complete complete, as per approved design and as directed by engineer.
Providing & Fixing in position decorative jali & art work in metal & non metallic material like wood, glass, stone, cement boards, composite material & similar panel of size & any shape up to 4M X 2M & thickness up to 1Omm for metal & up to 100mm for non metal job including jacket ptressing, water jet cutting, laser cutting on CNC machine, as per approved drawings;. Colours & texture should be as approved by Engineers, Fixing of panels on primary structure shall be done by dry wall cladding method with the help of SS screw fixtures, MS angle cleat, fisher plug & dowel pin etc. in proper alignment, line & level as per th
e approved drawings. Finishing of panels with paintable silicon sealent neatly between decorative panel & primary structure to provide one piece look including molding & cornices at junction of column & beam or frame as per Approved drawing including necessary MS fabrication works to support panel structure, necessary scaffolding at all level & staging etc. complete.' including cost of necessary machineries for installation, all necessary accessories, adhesives, hardware, cost of material, labour, Transportation, scaffolding, loading, unloading, all taxes, all lead & lifts, & maintenance up to one year from the certified date of completion etc. excluding GST Complete, as per approved design & detail drawings and as directed by engineer.
Providingand laying in situ / readymixM-30 controlled reinforced cement concrete of trapmetal for raft slab including "V" haunches, formwork, scaffolding, compactionby vibrating, finishing curingetc. complete.concrete batch mix plant /pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) etc. complete. (excluding reinforcement). a) RCC Grade with reversible drum type mixer/concrete batch mix plant (pan mixer)
Providing and applying Cold plastic paint two component rolled on surfacing material solvent free,high build two pack seamless, tough, skid resistant, material with has property of attaining 2.00mm thickness in single coat application white (or as required colour) based on glass and colour retaining acralic cross linking resin system for coloured road surfacing including surface cleaning and cost of all material etc. complete. (All inclusive on bitumen or concrete surface) work shall carried out as per IRC 35-2015 clause 2.2)
Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.36a)
Supplying on site well decomposed Farm Yard Manure for excavation area of depth of 30 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.36b)
Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:-Murraya(Kamini);Bag Size 7'' x 8" (plants list) 1(a) serial no 15.
Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms.(As per P&G DSR 2022- 23 Items of garden work,Sr No.3)
Filling fresh garden soil / silt & manure in excavated area of depth 30cms. (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.13)
Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour) (As per P&G DSR 2022-23 Items of garden work,Sr No.23)
Maintainance of Newly Developed Shrubs Area. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.31)
Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 20cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38a)
Supplying on site well decomposed Farm Yard Manure for excavation area of depth of 20 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38b)
Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs.for a depth of 20 cms.(As per P&G DSR 2022- 23 Items of garden work,Sr No.5)
Filling fresh garden soil / silt & manure in excavated area of depth 20cms. (As per P&G DSR 2022-23 Items of garden work,Sr No.15)
Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 20 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.23)
Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT Note - 2)For round wire armouring increase rate For 11 kV (E) by 28%
Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT . Note - 2)For round wire armouring increase rate For 11 kV (E) by 28%
Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable out door termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT
Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ
Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI
Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN
Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.
Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm
Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA
Supplying and erecting G.I. self stay set for pole, including anchor plate 300x300x6mm straining screw, loop-insulator, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m long, erected with pole clamps along with angle iron bracket of 50x50x6mm and one meter long fixed to pole at suitable height with suitable MS clamps duly erected in provided C.C. foundations complete
Supplying and erecting ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394.00 kg/km) as per specification No. OH-CON/ACS
Making Cement concrete foundation including excavation (60 x 60 x 150)cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).
Making Cement concrete foundation including excavation (60 x 60)cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45cm x 45cm x 45cm/ 45cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete. (for above 9m poles)
Dismantling existing pole mounted distribution transformer safely without any damages.
Supplying and erecting mini feeder pillar with 415V, 200A FP MCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket and enclosure must be dust proof, rust proof, vermin and water resistant, having slanting top and erected on angle iron/ GI frame in provided C.C. foundation complete as per specification no. SW-MFP.
Supplying and erecting mini feeder pillar with 415V, 315-320A FPMCCB as incomer and 3 outgoing circuits with HRC fuse base and cartridge of 100A aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket and enclosure must be dust proof, rust proof, vermin and water resistant, having slanting top and erected on angle iron/ GI frame in provided C.C. foundation complete as per specification no. SW-MFP.
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formedwire armoured (strip) cable 1100 V, 2 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 300 sq mm., with necessary material as per specification No. CB-JT/LT
Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 240 sq.mm., with necessary material as per specification No. CB-JT/LT
Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 120 to 185 sq. mm., with necessary material as per specification No. CB-JT/LT
Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq mm., with necessary material as per specification No. CB-JT/LT
Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT
Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT
Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT
Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT
Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG- ODF/SL.
Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal/conical GI pole).
Providing & erecting 4 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range o 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification No FGODF/ FLS2
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).
Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 constructi
on 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaries and its control gear box, lightning arrestor, arrangement for fixing aviation light, night glow reflector on pole at suitable height, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with double check nuts & necessary accessories complete. specification no. OH- PL/HM
Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG- ODF/FL.
Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 2m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5m raising lowering high mast).
Supplying & erecting street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery back up, having IP54, IK10 protection, 4 pole contactor upto 60A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric keypad in provided box as per specification SW-STCP.
Supplying and erecting PVC insulated PVC round sheathed FR 1.5 sq.mm (30 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV
Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP
Supplying, installing and testing earthing with galvanised iron earth plate size 60 x 60 x 0.6 cm complete with all accessories of GI materials & recording the results as per specification No. EA-EP
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.
Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).
Making Transformer plinth (1.5 x 1.5 x 1.5)m in size with necessary excavation in ground with 150mm thick M-10 PCC at the bottom and top and 250mm thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12mm thick including watering etc. complete.
Making trench in Soft soil having 0.75m depth and minimum 0.3m width for laying provided cables up to voltage level of 1.1kV complete as per specification no. CW-EXN-CTR
Making trench in Hard murum/Tar road having 0.75m depth and minimum 0.3m width for laying provided cables up to voltage level 1.1kV cable complete as per specification no. CW-EXN-CTR
Making trench in Hard murum/Tar road having 0.9m depth and minimum 0.3m width for laying provided cables of voltage range 3.3kV to 11kV complete as per specification no. CW-EXN-CTR
Excavating Hard rock or bituminous road by chiselling for preparing pit for pole/ stay/ earth plate/ for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.
Dismantling any type of unserviceable feeder pillar, switchgear panel, capacitor panel, metering panel, bus-bar panel, electronic equipment panel, etc. and making the site as required, approx. size (upto 200cm. x 90 cm x 45 cm and above) - Big Cupboard
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.44 MB
1.pdf
Tender Documents • 11.83 MB
2.pdf
Tender Documents • 14.65 MB
BOQ_2168809.xls
BOQ • 0.48 MB
3.pdf
Tender Documents • 14.65 MB
DTP.pdf
Tender Documents • 2.54 MB
Download all tender documents and submit your bid