Providing urgent electrical works at different TE bldg./ various sites under sub-division (Electrical) Pusa Road, MTNL, New Delhi.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable sixe MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ PVC trunking as required. A) 3x1.5 sqmm

b) 3x4 sqmm

Supplying and fixing of following sizes of steel conduit along with acccessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. A) 20 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. A) 75 MM x 75 mm x 60 mm deep

b) 180 mm x 100 mm x 60 mm deep

c) 200 mm x 125 mm x 60 mm deep

d) 250 mm x 300 mm x 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connections etc. as required (Make: Anchor/ Cona/ Kinjal/ SS) a) 5/6 amp switch

b) 15/16 amp switch

c) 3 pin 5/6 amp socket outlet

d) 6 pin 15/16 amp socket outlet

e) Hylam Sheet

Supplying and fixing single/two module stepped type electronic fan regulator on the exising modular plate switch box including connections but excluding modular plate etc. as required (Make: Anchor/ Cona/SS)

S/F 300 mm 230 Volts single phase 230 volts heavy duty exhaust fan with louver in existing opening as reqd. (M/s Crompton/ Bajaj/ Usha/ Khaitan make)

S/F SPN MCB DB with one on 25/32 amps SPN MCB on wall earthing the body i/c connection as reqd (M/s MDS/ L&T/ ABB/ SS make)

S/F 4 feet LED batten firring with integral electronic driver and LED tube operated on 230 V 50 Hz AC supply on surface with mouning arrangement connections etc complete as reqd (System wattage 20-22 W system, lumen output 1850-2000 lumens etc.) Make: Philips/ Osram/ Havells

S/F fancy type LED fitting on wall / surface etc as reqd.

Supplying and fixing single phase 230 volts 50 Hz AC supply 1200 mm sweep ceiling fan with all accessories a reqd. (M/s Usha/ Cromption/ Bajaj/ Make)

Providing and fixing call bell on wall/ surface etc as reqd.

Providing 7W/9W LED bulb on existing fitting etc as reqd. Make: M/s Philips/ Surya/ Havells/ Cromption/ Osram/ SS

S/F 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc as required.

Supplying and fixing following way single pole and neutral sheet steel, MCB distrubution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) a) 16 way (M/s MDS/L&T/ABB/Havells/C&S make)

Supplying and fixing following rating, double pole, 240 V isolator in existing MCB DB complete with connections, testing and commissioning etc. as required. A) 63 Amp (M/s MDS/L&T/ABB/Havells/C&S make)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. (M/s MDS/L&T/ABB/Havells/C&S make)

SITC of 30 watt energy efficient LED street light fitting with pressure dia cast housing suitable to mount on existing pole / bracket including providing / fixing brackates, clamps, fastners and connection testing & required modification of existing pole according to the size of above said fitting etc and dismantling of old fitting etc as required. (Make : Philips / Bajaj / Hallonex / HPL/surya/polycab).

Supplying and making end termination with brass compression gland and Copper/ aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE Copper/ aluminium conductor cable of 1.1 KV grade as required.(a) 2 core 1.5 sq. mm Copper cond cable

Supplying and making end termination with brass compression gland and Copper/ aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE Copper/ aluminium conductor cable of 1.1 KV grade as required.(a) 2 core 1.5 sq. mm Copper cond cable

Sypply & installing of electric hot water geyser capacity 25 Lts, 230 Volt, 50 Hz AC, i/p 2000 W including thermostat auto thermal trip on the wall with the help of clamp, screws, fastners providing PVC felixible pipe water connections, electrical connections earthing the body etc as reqd. (Make: Crompton greaves, Racold, Havells, Bajaj, Orient with ISI mark)

Supply and fixing following type PVC batten with cover on the wall/ wooden partion complete as required. A) 25 mm

Less credit for dismantled material (Dismantling of old fitting, conduits, ceiling fans of required areas, wires etc at different area as per the insctruction of engineer in charge etc as reqd.

Star Electric Works

BK Engineers India

S V Electrical