CA NO GE/AFJ-58/2022-23 REPAIR TO FLOOR , ATT, PLUMBING WORK, JOINERY, CUPBOARD AND MISC REPAIR WORKS IN DOMESTIC AREA AT AF STN JAMMU UNDER GE (AF) JAMMU

Amount

Dismantling existing unservicable floor/wall tiles of any description including bedding/screed layer complete all as specifed and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specifed and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specifed and directed.

Demolition of reinforced cement concrete of man hole covers/cover slabs complete all as specifed

M&L RCC 1:2:4 type B-1 (20 mm graded stone agg) as in slab , supported on wall, shelves and similar type of work etc complete all as specifed and directed.

M&L for Form work to RCC Slab, lintel band and similar type of work complete all as specifed and directed.

Supply and fixing in repair Deformed or TMT steel bars 8mm or 10mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified.

M&L 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in sub base of tiles floor finished etc complete all as specified and directed by Engr in charge.

M&L 40 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in floor finished even and smooth with using extra cement and glass dividing strip etc complete all as specified and directed by Engr in charge.

M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specifed and directed.

M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specifed and directed.

M&L vitrified coloured tiles double charge 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.36 sqm but not exe0.42 sqm , in floors in repairs complete all as specified and directed by Engr in charge.

M&L vitrified coloured tiles double charge 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.36 sqm but not exe0.42 sqm , in cut pieces in wall/skirting 10 mm thick cement mortar 1:4 to match the Shade, pattern, and complete all as specified and directed by Engr in charge.

M&L epoxy chemical grout for floor tiles jointing in any colour and minimum widh of joint 4mm or as directed by Engr in charge

M&L chemical adhessive for tiles flooring on fixing on existing old floor including proper mixing with cement and water etc complete all as specified as per manufacture instruction and directed by Engr in charge.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in cooking plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite& moulding the edges complete all as specified

M&L for 300x200 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specifed and directed.

M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specifed and directed.

S&F in repairs glazed ceramic wall tiles iternity class having a size area exc 0.27 But n exc 0.45 Sqm each incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles as directed at site .

Taking down cement plaster of any description including racking out joint hacking for key scribing down with water etc complete all as specified.

Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with oil emulsion over a coat of primming coat and 3mm wall putty complete all as specifed and directed..

M&L preparation of new plastered surfaces of wall priming with alkali primer and applying two coats of cement based paint complete all as specifed and directed.

Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store complete all as specifed and directed.

S&F in repairs 16mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified

Description all as per item no 25 above re fixing only all as spd and directed by Engr-in-Charge

Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engr-in-Charge

S&F in repairs 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

Description all as per item no 28 above Re fixing only complete all as spd and directed by Engr-in-Charge

Cutting chases,pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1:3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge.

S&F in repairs wc seat vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete, including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe.

S&F in reapir vitreous china wash hand basin, white , flat back, size 630 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in reapir vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified.

S&F in repair PVC seat cover for EWC white colour complete with MS hinged chromium plated all as specified and directed by Engr-in-Charge

S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC flush pipe complete all as specifed and directed.

S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engr-in-Charge

S&F glass shelf corner with railing fixed with and including chromium plated brass screws and plastic cleats ( Minimum weight 300 gms) complete all as specifed and directed.

S&F chromium plated soap container fixed with and including chromium plated brass screws and plastic cleats ( Minimum weight 105 gms) complete all as specifed and directed.

S&F chromium plated towel ring fixed with and including chromium plated brass screws and plastic cleats complete all as specifed and directed.

S&F chromium plated towel rail 450mm long fixed with and including Chromium plated brass screws and plastic cleats complete all as specifed and directed.

S&F chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws and plastic cleatscomplete all as specifed and directed.

S&F in repair ball PVC valves high pressure with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed with 20mm dia complete all as specifed and directed.

Description all as per item no 43 above but 15mm dia complete all as specifed and directed.

S and F in repair 15mm dia bib tap fancy type chromium plated(CP) complete all as specifed and directed.

S and F in repair 15mm dia bib tap long nose Bib tap 15mm bore chromium plated(CP) complete all as specifed and directed.

S&F in repair pillar tap fancy type chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia complete all as specifed and directed.

S and F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in- charge

Supply and fixing in repair chromium plated 15mm dia stop cock screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specifed and directed.

Supply and fixing in repair long shank and cup (concealed Type) chromium plated stop cock 15mm bore complete all as specifed and directed.

Supply and fixing in repair angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specifed and directed.

Supply and fixing in repair 15mm dia 450mm long PVC connection with PTMT (hot and cold) with nut and washer complete all as specifed and directed.

Supply and fixing in repair 15mm dia 600mm long PVC connection with PTMT (hot and cold) with nut and washer complete all as specifed and directed.

Supply and fixing in repair chromium plated shower rose of 100mm dia.Chromium plated with arm 300mm long suitable for 15mm dia pipe (as per sample approved by Engineer-in-Charge) complete all as specifed and directed..

S&F in repair 32mm dia waste pipe of PTMT,half or full threaded (minimum weight 45 gms), to WHB and kitchen sink complete all as specified and directed by Engr-in-Charge.

Description all as per srl item no 55 above but 40 mm dia suitable for sink etc complete all as specifed and directed.

S&F in repair 32mm dia waste coupling of cp ,half or full threaded (minimum weight 45 gms), to WHB and kitchen sink complete all as specified and directed by Engr-in-Charge.

Ditto as per srl item no 57 above but 40 mm dia suitable for sink etc complete all as specifed and directed.

Dismantling unservicable /cracked water tanks and removing from site capacity exe 250 ltr n.exe 500 ltr complete all as specifed and directed.

Description all as per Item no 59 above but 1000 Ltrs capacity complete all as specifed and directed.

Supply and fixing in repairs white colour rotational moulded polythene water storage tanks (cylindered vertical closed top ) hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 500 ltr complete all as specifed and directed.

Discription all as per Item no 61 above but 1000 Ltrs capacity complete all as specifed and directed.

S&F in repair brass CP central hole wash basin mixer for hot and cold for 15mm bore complete fixed to connection complete all as specifed and directed.

S& F in repairs CP brass jet nozzle with 600 long PVC connection for EWC incl fixing device complete all as specifed and directed.

S& F in repairs kitchen plate rack, including shelves, made of stainless steel not less than 1mm thick with fixing acessories, overall size 900 mm x 600mm x 250 mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in all respect as specified in position complete all as specifed and directed.

S&F in repair brass wall mixer/sink mixer for Hot and cold for 15mm bore complete fixed to connection complete all as specifed and directed.

Re-screwing or easing & adjusting without taking down shutter of any description exc 1.5Sqm & n.exc 4 Sqm complete all as specifed and directed.

Taking down wooden shutter of any dscription exc 2.00 Sqm each,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specifed & directed

Taking down wooden shutter of any dscription exc 2.00 Sqm each,with old builder hardware etc complete all as specifed & directed

Taking down chowkhats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specifed and directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specifed and directed.

S & F in repair factory made solid PVC moulded door shutter, 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specifed and as directed by Engineer-in-Charge.

S & F in repair solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing & all as specifed and as directed by Engineer-in-Charge..

S&F in repair pressed steel frames (Factory made) made out if 1.25mm thick mm black MS sheet for doors, with double rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.

S&F in repair pressed steel frames (Factory made) made out if 1.25mm thick mm black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame size 105x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.

S&F in repair 2nd class hardwood 30mm thick glazed and skelton, shutters, open rebated and prepared to receive glass, gauze without sash bars all as specified in SSR Pt I, Section 8, clause 8.20 (a)

M&L in repair for factory made Box type steel windows with side hung shutters(glazed and wire mesh) including Box type hinges with steel handles, two Nos of tower bolts in each leaf with glazing bars and guard bars complete with factory priming coat.

S/F in repair 35mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides deco rative face veneer with lipping/frame to match

S&F in repair 30mm thick, 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as spd.

S&F in repair Factory made solid panel PVC door shutter 30 mm thick (style) Consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andSingle Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge. fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on and additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as spd.

Supply and fixing in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified (ISI Marked).

Supply and fixing in repair Aluminiun anodised barrel tower bolts of extruded section of size 150mm complete all as specifed

Taking down or cutting MS helical door spring 150mm to 200 mm long by welding or chiseling etc from metal door frames and M&L in same position by running welding n. exc 6 mm thickness of metal and including fixing roller plate on wooden rail with screws complete all as spd and ditected by Engr-in- charge.

Supply and fixing in repair MS butt hinges medium weight cold rolled 100 mm ISI marked complete all as specified incl. required welding etc in repairs.

Description all as per item no.86 above but 50mm long

Description all as per item no.86 above but 75mm long

Supply and fixing in repair aluminum alloy handle 125 mm size cast type complete all as specified .

Supply and fixing in repair aluminum anodized sliding door bolts 250 mm long with hasp and staple (bold type) complete all as specified (ISI Marked) fixed in repair

Supply and fixing in repair prelaminated particle board 18/19mm thick interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination type fixed with screws to timber framework and fillet etc complete all as specifed and as directed by Engineer-in-Charge.

Supply and fixing in repair continuous (piano) hinges mild steel bright finish width of flap 40 mm (when open) all as specified.

Supply and fixing in repair door seal 1.5mm thick strip of mild steel with hard brush fixed in door bottom all as specified

Supply and fixing in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw all as specified (ISI Marked).

Supply and fixing in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified.(ht of bldg upto 4th storey)

Supply and fixingi repairs 4.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Sqm in each pane.(ht of bldg upto 4th storey)

Description all as per item no 97 above but figured type pin headed glass

Supply and fixing in repair SS wire cloth 0.63 mm nominal dia of wire and avg wide 1.40 mm aperture of tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows all as spd.(ht of bldg upto 4th storey).

Supply and fixing in repair 2nd class hard wood, plain solid straight chowkhats/frames wrought framed and rebated on the solid rounded or chamfered put to gather with glue pinned at joints complete

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of pink wood primer all as specified and directed

Supply and fixing in repair Floor door stopper of aluminium alloy body and toungue with hard drawn steel spring of 150 mm complete all as specified and directed

S&F in repair 40mm Dia Knob of any description for cupboard, dressing table etc, fixed with screws all as specified.

Supply and fixing in repair MS PVC coated brackets made inshape and size to hold certain rods and size of bracket 150mm colour and Pattern approved by GE

Supply and fixing in repair MS PVC sheathed 20mm dia drapery rod of approved pattern and shade complete

Supply and fixing in repair end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete

Supply and fixing in repair rounded block made in round shape and coated with brown/cherry/Golden colour suitable for curtain rod 20mm dia complete

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets.

Supply and fixing in repair Solid PVC Wall Lining consisting of 5mm thick Plain Colou PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Supply and fixing in repair 5 mm thick PVC sheet fillet of width 35mm for wall panneling inclusive of fixing of wall to make pvc frame etc complete all as specified and directed.

S & F in repairs 10-12 mm thick ceiling board fixed with screws on and including galvanized iron with aluminum coating snap grid frame work (size of grid 605x605mm) with fasteners, supports, plugs to walls/ceiling including two coats of oilbound distemper complete as per manufacturer instructions and as directed by Engr-in-Charge.

Taking down defective aluminium door of size not exceeding 4.00 sqm with glass panes and repairing floor stopper, bearing alingment, including replacement of roller, locking arrengement d pivet, and other minor parts etc reuired for smooth functioning of aluminiu door and refixing in same opening after repair complete all as specified and as direted by Enineer in charge.

S&F in repair anodised powder coating aluminium frame for door, windows, ventilators with one or more rebates including joining cleat, hinges for fixing etc acomplete all as specified and as directed by Engr-in-charge.

S&F in repair anodised aluminium powder coated window with glazed and wire mesh shutter sliding type using aluminium open three track section having thickness not less than 1.20mm & specific size of style,top rails and bottom rails including anodised aluminium frame ,necessary joining cleats,glazing clips rubber packing ,snap beading,screw etc complete all as specified

S&F in repair aluminium anodised powder coating grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair for aluminium mortice lock 100 mm and 4 levers with locking key arrengment for aluminium door any size etc complete all as directed by engr in charge

S&F in repair door closer hydraulically regulated aluminium body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified and as directed

S &F in repair 4.8mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in square exc 0.5 sq. m in each pane complete all as specified and as directed bu Engr-in-charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the GE(AF)Jammu.

M/S MOHAN LAL SHARMA

M/s Sunny Gupta