Supply Erection Fixing of Steel Tubular Poles with 45W LED at Parking Area Wonderland Park under Chandernagore Municipal Corporation

Amount

Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimensions ---- 4 SWG; 4.5mtrs; 40 Kg

S/F single arm projected lamp bracket (Single pipe bending ) of 50cm (2") dia G.I. pipe (ISI medium) 3.65 mm thick of 2.1 mtr (6’ approx) long having 105 degree curvature with reducing socket to be fitted at the top of the pole with bolts, nuts, clamps etc. as required.

S/F double arm projected lamp bracket (Single pip bending) of 50mm (2") dia G.I. pipe (ISI medium) of 2.5 mtr long each having 105 degree curvature with reducing socket to be fitted at the top of the pole with bolts, nuts clamps etc. as required

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (proportion and dimension indicated below) having 600x600x150 mm thick cc(4:2:1) base block below the plate/pole with hard jhama metal including CC(6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3mm thick net cemented finish and GI earth bolt after making drilled holes etc. on pole and carriage the pole upto 1.6km from store to work site including filling up the excavated earth pit by shifted soil and ramming properly (a) upto 9.0 mtr. - size 0.6x0.6x1.70mts

Supply of 2 core 16sqmm armoured Aluminium cable and restoring surface duly rammed

Laying of one No. Cable upto 35 sqmm in underground trench 460mm wide x 760mm average depth, with brick pratection on top of the cable with 8(eight) nos bricks per meter, including filling the space between the brick and cable and also the trench with shifted soil, levelling up and restoring surface duly rammed

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Supplying and fixing compression type gland complete with brass gland, brass ring, rubber ring for dust and moisture proof entry of XLPE/PVC armoured cables as below, 2 core 16 sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method incl supplying and fixing solderless socket(Dowels) type anticorrosive paste and jointing materials, 2 core 16 sqmm

Supplying and wiring in 2 x 1/1.40 (2X3/.029) copper conductor single core PVC insulated 250V grade wire from cable termination block to luminaries with earthing attachment in 14 SWG G.I. Wire including making necessary connections complete as per direction of Engineer-In-Charge.

Supply and delivery of 45 watt LED Street Light with pressure die cast aluminium housing, IP66 protection, road way luminarie with high power LED as per the detail technical proposal specification & vendor list attached [Make-Crompton (LSTS-45-CDL-M)/Philips (BRP056 LED47 CW PSU S1)/ Havells (ENDURA CITYLITE PLATPLUS SL 45WLED 757SASYBOPC) or equivalent Warranty Period- 7 Years]

Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: HPMV/HPSV luminaries/LED fittings of any wattage.

Earthing with 50mm dia GI pipe 3.64mm thick x 3.04mtrs long and 1x4SWG GI (Hot Dip) wire (4mtrs long), 13mm dia x 80mm long GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection (1mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65mts below the ground level as below: by TATA-Medium GI pipe

Painting of steel Tubular pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (a) Upto 9.0 mtr. long pole-- (i) One coat of red lead/Zinc chromate priming, (ii) 1st coat of synthetic enamel paint over the primer, (iii) 2nd coat of synthetic enamel paint over the 1st coat

Supplying & Erection of mini size feeder pillar box of Size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ---- 2+4 way----Enclosure (607710) [ Legrand/Schneider make]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection ---- 32A DP [Legrand/ Crabtree/Schneider make]

Add @ 18% GST

Add @ 1% Labour Cess

ROHIT ENTERPRISE

ROSHNI ELECTRICALS MFG CO