PROVN OF 04 X TOILETS AND 04 X BATHROOMS NEAR BLDG NO 113, 114, OTM ACCOMMODATION OF OR OF 5118 COY ASC (COMP) AT NIMU MIL STN UNDER AGE (I) NIMU

Surface execvation n exc 30 cm deep and everaging 15 cm deep and getting out in hard and dense soil.

Excavation in trenches not exceeding 1.5m wide and n exc 1.5m in depth for foundations, laying of pipes etc and not exceeding 10 sqm on plan for manhole etc and not exceeding 1.5m in depth and getting out in hard/dense soil, complete all as specified and directed by Engr-in-charge.

Returning, filling in excavated soil including spreading, leveling watering and well remming layers not exceeding 25 cm thick complete

Removing excavated material (soils) to a distance exceeding 50mtr but n.exc 100m and depositing where directed at a level not exceeding 15.mtr above the starting point complete all as specified and directed by Engr-in-charge.

M&L Cement concrete type D2 1:4:8 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge.

Form work to sides of concrete foundations footings base of columns, plinth beams, raft and raft beams, sides and soffits of foundation as specified complete all as specified and directed by Engr-in-charge.

Formwork to sides and soffits of floor or roof beams,beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc complete all as specified and directed by Engr-in-charge.

Form work to sides of pillars, columns complete all as specified and directed by Engr-in-charge.

M&L RCC Design mix, M-30 using 20mm graded agg as foundations, including rafts, fottings, foundation beams; plinth beams; bases for columns, etc,; basement slabs, under reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.

M&L RCC Design mix, M-30 using 20mm graded agg as beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

M & L Providing, cement concrete Type B-1 1 : 2 :4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses etc including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed by Engr-in-charge.

M&L RCC Design mix, M-30 using 20mm graded agg as Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-charge.

S & F TMT bars 10mm dia and over, cut to lingth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

All as per item No 13 here-in-before but of 6 and incl 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6 type C1 using 20mm graded curshed stone aggregate) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-charge.

M&L for PCC type C-2 (1:3:6) (40 mm graded stone agg) 75mm thick as in plinth protection complete all as specified and directed by Engr-in-charge.

M&L Non - skid Ceramic white tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, over set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L Glazed ceramic Coloured tiles tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster in CM (1 : 4) complete all as specified and directed by Engr-in-charge.

S&F roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracked framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc. Confirming to FE 410W (Gde- E-250) quality A complete all as specified and directed by Engr-in-charge.

S & F Pre-Painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-charge.

All as per item No 21 here-in-before but plain steel sheet

M&L applying two coats of synthetic enamel painting to new steel surfaces exc 10 cm width/girth over a coat of primer suitable for galvanised sheet as per manufactures instructions including prearation of surfaces and filling with filler where reqd all as specified complete all as specified and directed by Engr-in-charge.

S & F mild steel hold fasts, wall/wind ties and similar small articles conforming to Fe 290-0 or E 165 complete all as specified and directed complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick on fair faces of birckwork ar concrete surfaces in cement mortar (1:4) with WPC and finished even and smooth without using extra cement (Note : WPC will be measured and paid separately) complete all as specified and directed by Engr-in-charge.

All as per item No above but in CM 1 : 6 complete all as specified and directed by Engr-in-charge.

Supply only liquid WPC complete all as specified and directed by Engr-in-charge.

M & L Preparation of new plastered surface of external wall surface applying two coat of cement base paint incl curing complete over a coat of chalk white complete all as specified and directed by Engr-in-charge.

All as per item No above but two coats of White wash on internal surfaces complete all as specified and directed by Engr-in-charge.

M&L 2nd class Hard wood Plain, solid, straight chowkats and framed rabeted on the solid, rounded or chamfered, put together with glue pinned at jounts, supplied and fixed complete all as specified and directed by Engr-in-charge.

M&L 2nd class Hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to showkats complete all as specified and directed by Engr-in-Charge.

S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, 150mm size, fabricated type, anodised complete all as specified and directed by Engr-in-charge.

S&F Aluminim alloy, anodised, sliding door bolt 250 mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-charge.

S&F Aluminim anodised, barrel tower bolt of extruded section and fixed, 200 mm size with extruded section and fixed complete all as specified and directed by Engr-in-charge.

S&F 3mm thk sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

M&L applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including prearation of surfaces including filling with filer where reqd all as specied and directed

S&F 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S & F 25mm dia nipple suitable for water tank complete all as specified and directed by Engr-in-charge.

S & F 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-charge.

M &L 20mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed complete all as specified and directed by Engr-in-charge..

All as per item here-in-befor but 25 mm outer dia of pipe complete all as specified and directed by Engr-in-charge.

S & F 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and directed by Engr-in-charge.

S & F for 15mm PVC connection of 600mm long complete all as specified and directed by Engr-in-charge.

S & F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type complete all as specified and directed by Engr-in-charge.

S&F 15mm Angle/Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

S&F 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

S & F PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.

S&F vitreous china wash basin white flat back size 550x400mm ovel type/round /any shape (including tap, waste chain and plug and porcelain stopper and brackets all complete all as specified and directed by Engr-in-charge.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge.

M & L Salt-glazed stoneware drain pipes of 150 mm dia, laid in trenches over Concrete bed of cement concrete 1:3:6 type C-2 to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested and jointed complete as specified directed by Engr-in-Charge.

M & L Precast reinforced cement concrete, type B-1, 1:2:4 (using 20 mm graded crushed stone aggreagate) as in manhole cover set in cement mortor 1:4, complete as specified directed by Engr-in-Charge.

M & L for cement concrete type B-2, 1: 2 : 4 (using 40 mm aggregate) complete all as specified and directed by Engr-in-charge.

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed by Engineer-in-Charge for following :- (a) One light point/one fan point controlled by one switch

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed by Engineer-in-Charge for following :- (b) One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed by Engineer-in-Charge for following :- (c) One 3 pin 5 Amp socket outlet on same board.

All same as per item No 56 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable complete all as specified and directed by Engr-in-charge.

S&F Socket 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed by Engr In Charge.

S&F Switch piano flush type 5 Amp, single pole, one way complete all as specified and directed by Engr in Charge.

S&f Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed by Engr in Charge .

S&F Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed by Engr in Charge .

M&L for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr in Charge.

S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 10 watt, 2 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.(Havells Cat Pt No. - LHEXACP7IN1W010 or equivalent in Philips/Crompton)

S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.(Havells Cat Pt No. - LHEXAXPNIN1W020 or equivalent in Philips/Crompton)

S&F sheet metal powder coated versatile Double door SPN distribution board, 16 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge. .

M&L for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards with all accessories complete all as per specified and as directed by Engr-in-Charge.

S&F to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards with all accessories complete all as per specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan, engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm AC single phase with, blades, and frame and louvers of size 300 mm sweep all as per specified and as directed by Engr-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to MS galvanized earh strip of size 25 x 4 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, GI strip protected by dia 40mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit (30x30x30cm) with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover of suitable size with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified and directed by Engr in charge.