Karnataka

Active

Works

Other Works

Design, Supply, Installation, Testing and Commissioning of 10 Passengers Lift along with steel structure and ACP Cladding for suitable Lift at Pareeksha Bhavan, Jnana Bharathi Campus, Bangalore University, Bangalore.

Bangalore University

Registrar Office Bangalore University | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 6 Jul 2026

Tender Value

Refer Docs

EMD Value

₹83,900

Closing Date

6 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Bangalore University

Work Description

Design, Supply, Installation, Testing and Commissioning of 10 Passengers Lift along with steel structure and ACP Cladding for suitable Lift

Tender Information

Tender ID

307615

Reference Number

BU/2026-27/OW/WORK_INDENT94

Tender Type

Open

Product Category

Other Works

Location

Registrar Office Bangalore University

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 as KW Doc - 41.95 Lakhs

RequiredKPWD Class-III and above Civil Registration Certificate

RequiredSimilar Work done certificate as per KW Doc 50 percent amount put to tender i.e., Rs.20.98 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredTotal value of Civil engineering works executed and payments received in the last five years

RequiredList of existing commitments and ongoing work

RequiredList of works for which tenders already submitted

RequiredBidder personal No., address and Bankers details for communication

RequiredAssessed available tender capacity-AxNx2.5 -B should be greater than or equal to Rs.41.95 Lakhs

RequiredTenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrification works and should have executed similar electrical works totaling Rs. 9.77 Lakhs in any one year in 2021-22 to 2025-26

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

If any tenderer qoutes less than SR amount, he has to remitt the unbalanced tender amount in the form FDR in favour of Finance officer, Bangalore University has guarantee amount which will be refund after successful completion of work.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder should achieved in at least two financial years a minimum financial turnover (in all classes of civil Engineering works only) of Rs. 41.95 Lakhs.

Bidder mandating Satisfactorily completion as prime contractor for at least one similar nature of work of value not less than Rs.20.98 Lakhs (Updated to 2026-27 Price level) should be counter signed by the Employer in Charge not below the rank of Executive Engineer or Equivalent.

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrification works and should have executed similar electrical works totaling Rs. 9.77 Lakhs (not less than 50% of electrical works) in any one year(2021-22 to 2025-26)

Contractor with Karnataka PWD Class-3 & above civil registration can be eligible for participation.

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Tenderers should not be associated or have been associated in the past, directly or indirectly, with a firm or any of its affiliates which have been engaged by the Purchaser to provide consulting services for the preparation of the design, specifications, and other documents to be used for the procurement of the goods under this Invitation for Tenders.

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of Karnataka Public Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The cost of the Tender Processing shall not be refundable.

EMD should be paid as specified in the tender document available in Karnataka public procurement portal.

The EMD & Tender processing fee shall be paid through Karnataka public procurement portal only as per the e-procurement rules

The EMD and Security Deposit are liable to be forfeited as liquidated damages in the event of any evasion, refusal or delay on his/her part in signing the contract form. The other Terms and Conditions are as stipulated Standard Tender Document of Government of Karnataka

The Tenderers need to register with Karnataka public procurement portal and to obtain user ID and Password for participating in the Tender process

For any clarification refer the bid documents or contact University Engineer on all working days between 10.30 AM to 4.30 PM

Bidders should abide by other terms & conditions as prescribed in relevant KTPP rules, KTPP Act and standard tender document.

All the relevant Documents must be uploaded in Pdf and excel format only.

Bidder has to quote the rates excluding GST and The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period.

Should submit the Attested copy of the Turnover certificates of last 5 Finacial years (2021-22 to 2025-26) issued by the Chartered Accountant

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractor should adhere to HSE (Health Safety Environment) policy and Environmental policies applicable for the projects.

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value as mentioned in the Bid Doc.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,050

EMD Fee Amount

₹83,900

Important Dates

Last Activity

19 Jun 2026

Published

19 Jun 2026

Download Ends

4 Jul 2026

BOQ Preview

•

Design, Supply, Installation, Testing and Commissioning of 10 Passengers Lift along with steel structure and ACP Cladding for suitable Lift at Pareeksha Bhavan, Jnana Bharathi Campus, Bangalore University, Bangalore.

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such similar works in all kinds of soils , as per drawing and te...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing and laying in position plain cement concrete for leveling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall includi...

•

Patching of damaged concrete surface with polymer concrete and curing compounds initiator and promoter, availuable in present formulations, to be applied as per instructions of manufacturer and as app...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing of Aluminum composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & columns/ beams with necessary aluminum frame works at required level made out...

•

Providing, assembling and supplying vision glass panels IGUscomprising of hermetically sealed 6-12- 6mm insulated glass double glazed vision panel units of size and shape as required and specified, co...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 meter height, above ground level, including additional rows of scaffolding in stepped...

•

Supplying, fitting and placing TMT FE 550/550 D steel reinforcement including cost of all materials, machinery, labour, cleaning, straighting, cutting,bending,hooking, laping/welding joints, tying wit...

•

Design, supplying, erecting testing and commissioning of - passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary raw1 plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch ---- With all lead and lift including cost and conveyanc...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket ---- With all lead and lift including cost and conveyance o...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall I wood board I flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board.63 Amps 4 pole ---- With all lead and lift including cost and convey...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x6mm GI strip ---- With all lead and lift including cost and conveyance of all mater...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate ---- With all lead and lift including cost and conveyance of ...

•

Supplying of 1.1 KV, XLPE or heat resistant PVC insulated, PVC extruted inner sheath armoured LT UG Cable as per IS- 1554 (Part-1) or IS 7098 Part-1 Armouring strip thickness and resistivity as per IS...

•

Laying of cable in existing trench / GI pipe /stoneware/RCC Hume pipe/using wooden/aluminium rollers as directed by the departmental staff.LT Cable. 35 to 95 SQmm ---- With all lead and lift including...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete ---- With all lead and lift including cost and conveyance of all materials,labour, ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

TN TB Valuation Center Lift.doc

Instructions to Tenderers • 0.14 MB

KW2 Doc Valuation Center Lift.doc

Tender Document • 0.27 MB

Ready to Participate?

Download all tender documents and submit your bid