Estimate For Repair and Rehabilitation of Residential building of Executive Engineer Gurdaspur canal and Ground water Division

Amount

Scraping Whitewashand colour wash

Removing Doors and Windows(Steelorwood)with chowkhats by making recesses in walls when the wall is not to be dismantled Doors of area 3 sqm and below.

Windows of area3 sqm and below

Dismantling glazed tiles (to be carefully removed).

12.5 mm thick cement plaster 1:4

Preparation of plasteredor concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coatto makeaneven surfacebeforeapplyingAcrylic wall putty on newplastered surface.Complete as per specifications

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or mor coats over one priming coatto give an even shade

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacemetc. Two ormore coats to givean even shade

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseedoil,Varnish,andChalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coaton wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with syntheti cenamel paint in all shades on wood work, metallicor plastered,concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with aluminum paint to givean even shade excluding priming coat

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified abovebut includinglabourfor fixing the same in position (Code :IS 2202-1 (1999) Decorative with teak facing on both sides edges lipped with teak with laminated core 35mm thick

Teak wood wire shutter without spring (single leaf ) 35 mm thick (single)

Providing and fixing 12 mm thick frame less toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottompivot& double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Providing& fixing 9" stainless steel handles ISI marked on door & window frames completeinall respect as per the directions of Engineer-in-charg

First class burnt brick work laid in cement sand mortar1:4 in foundation and plinth

First class burnt brick laid in cement sand mortar1:6in foundation and plinth

First class burnt brick work laid in cement sand mortar1:6in first storey upto 4 metres above plinth level

Providing and laying four courses of water proofing treatment with bitumen felt over roofs consistin

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions Engineer-in-charge.

RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USEDFOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES

Two Way 6amp. Switch Flush Piano type

Single Pole 16/20amp. Switch with indicator Flush Piano type

One Way 6amp. Bell Push

5pin 6amp. Wall Socket Flush Piano type

Step type Fan Regulator Flush Piano type (Switch size)

Telephone Socket Flush Piano type (Switch size)

6/10amp. One Way Modular Switch (One Module)

Supply anderection of Modular Cover Frame (Complete set)onth eexisting metal box including fixing and connection of existing switches and sockets and other petty material etc: Modular Cover Frame One or Two Module

Modular Cover Frame Four Module

Modular Cover Frame Six Module

Modular Cover Frame Twelve Module

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB‘s for circuit protection against overload and short circuit current fault suitable for 240/415volts50cyclesAC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC60898-1, energylimitati onc lass-3, true contactindication,labelholder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: III) MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 6-32amp. (10kA, Curve-C)

TP&N Horizontal Double Door Distribution Board 4 way each

RECESSED PIPE PVC WIRING SYSTEM WITH MODULAR SWITCHES: 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and CallBell),SteelHooks,Sheet metal fanbox (1.6mmthick shape hexagonal), Circular junctionBoxes(FourwayPVC 1½"deep for wall sandCI3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)andotherpetty material etc., including the costof above material,cutting andfillingupof chases(with finishing the surface): ((ii)) Wiring light point

Wiring call-bell point

Wiring 6Amp. Wall socket poin

Wiring 16/20Amp. power plug control poin

Wiring light point with double control switches.

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathedcopper conductor cable (ISI marked) suitable upto1100voltsgradeconfirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge: Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions Engineer-in-Charge

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and makena ideal choice for high traffic zones.) Size 600x600 mm

Chinaware extended wall mounted E W.C. with matching chinaware cistern and seat cover complete in all respect.

Providing and fixing Stainless steel health faucet complete in all respect.

Providing and fixing in position C.P elbowaction pillar tap of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing & fixing in position15mmi/dC.Pbrass wall mixer of approved make (to the approval of Engineer-in-charge) complete in all respect C.P brass wall mixer with Telephonic Shower

Providing and fixing in positionC.P. brass overhead shower roundorsquare1flow without shower arm with 15mmi/d inlet of approved make (to the approval of make (to the approval of Engineer-in-charge) complete in all respect. CP Brass rain Fall Shower without arm 8" round

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel Rails size 15mm dia 610mm long

Providing and fixing i position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect CP brass Acrylic Shelf size 560mmx130mm

Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respec

Providing & Fixing in postion liquid soap container or approved make (to the approval Engineer-in-charge ) complete in all respect. C.P. brass liquid soap containe

Single lever concealed divertor for bath and shower system (3 inlet flow) with body and upper part

Providing and fixing Centrifugally cast iron Floor traps conforming to I.S.I. Specification (IS:3989) of approved make (to the approval of Engineer-in-charge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm. 100mm x 75mm i/d 300 mm long

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body foam flow without flange

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. Brass Bib cock/Stop cock 15mm x 400gm

Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-in-charge ) complete in all respect. 5mm i/d

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Cutting chase in bric wallsincementor infloor for embedding G.I. or C.I pipes line and making good the same to its original condition Size 75 mm x 75 mm

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. Rectangular Sink with Deluxe Border Single Bowl Overall Size 700mmx 555 mm x 230 mm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack BoltScrewPair115mm long without CP fittings complete in all respe Size 630 mm x 450mm x 830 mm

Providing and fixing in positionC.P.brassbottletrap 32 mm dia with 40 mmseal of approved make (to the approval of Engineer-in-charge)complete in all respect.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-I charge) complete in all respect. PVC tube connection of size15 mmx 450mm with C.P. Brass nut

CONCEALED INWALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipesasperIS15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all C PVC plain & brass threaded fittingsi/cfixingthepipewith clamps at 1.00 m spacing including jointing of pipes & fittings, with one stepCPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. b) SDR 11 CPVC pipes fittings 20mm o/d

C) CPVCSDR11Pipe&fitting 25mm o/d

Cutting holes upto 23 cm square for pipes in flooring and roof sof bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required. Through floor or roof 15.00cm thick

Providing,Laying, fixing & jointingof P.V.C. Pipesas per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge)alongthe Trenche sand laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 200mmo/d pipe of 10 Kgf. / sqcm

Cement concrete 1:8:16 With brick ballast 20mm gauge mixing by mechanical means using concretemixer volumetric type

Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

1.2 Meter High G.I. Barbed Wire Fencing 1.2 meter high G.I. barbed wire fencingwith1.8 meter angle iron posts 40 x 40 x 6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications

Providing and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mm x 40mm x 6mm angle iron frame with diagonal braces3.15mm gusset plates at the junctions,hooksat top and 25mm dia pulleys at bottom an 40mm x 40mm x 25mm dia pulleys at bottom and 40mx40mmx6mmangle iron top and bottom guides including locking arrangement withhandlesetc. complete in respects.

Cold twisted detormed(Ribbed/ Tor steel) Bars(Fe500 gradeas per IS 1786-2008),forR.C.Cworks, where not including in the complete rate of RCC including bending and binding placing in position complete

Earth work in excavation infoundation strenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressingof bottomand sides of trenches, stacking the excavated soil clear fromthe edge of excavation and subsequent filling around masonryin15cm, layerswith compaction includingdisposal of all surplussoil asdirected within lead of 30 metres.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

CEILING FAN

BATTEN TUBE 20W

EXAUST FAN

GATE PILLER LIGHT

VERMA CONTRACTORS (BID ID -652945)

ROHIT CONTRACTORS (BID ID -652943)