Installation of Bird Tower in park near scheme no.04, M.C. Jind (Recall)

Providing and constructing RCC Bird Tower above already constructed 12 ft high RCC column and slab, up to an overall height of approx 45 ft, comprising extension of RCC shaft/column, intermediate beams and 5–6 nos. bird resting/nesting platforms at different levels, in RCC M25 grade with Fe500 reinforcement including centering, shuttering, vibration and curing complete and providing bird nesting arrangements through suitable niches/MS fixtures fixed securely in Gujarat pattern or as approved: finishing with 12-15 mm thick cement plaster as requird smooth finish, and applying weather-resistant exterior paint: including all materials, labour, scaffolding, lifting, tools and plants complete in all respects as per direction of the Engineer-in-Charge

Providing, designing, and fixing of imported tensile fabric should also include cutting, welding, cables, plates and necessary hardware for fixing the fabricas approved shape as per the drawing. Membrane shall be cut and manufactured with a high-frequency PVC welding machine. Over steel frames with all fittings and fixtures such as Aluminium Strip etc., with necessary tensioning material complete in all respects as per the direction of the engineer in charge.

LED Flood Light, powder-coated pressure die cast aluminium (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt). Supplying, Installation, Testing and Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency greater than 85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%,THD Less than 10% as per IEC 61000-3-2, P. F.greater than or equal to 0.95, IP-66,IK-10, CRI greater than 70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output. LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by the Engineer-in-Charge as per the requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 100 watt