Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST QUOTED BIDDER | |
| 2 | L2₹75.1 L+₹5.2 L (7.42%)Rejected-Finance S NO 41 4K JAIHIND SOCIETY GANESH NAGAR NEAR ANAND PARK VADGAON SHERI PUNE 411 014 | PUNE | PUNE | MAHARASHTRA | 411014 | L2 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 3 | L3₹84.5 L+₹14.6 L (20.8%)Rejected-Finance 59 ST MARY S ROAD SECUNDERABAD 500 003 | SECUNDERABAD | SECUNDERABAD | TELANGANA | 500003 | L3 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER |
Tender Value
₹80.5 L
EMD Value
₹1.5 L
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SECUNDERABAD
CWE AF SECUNDERABAD BOWENPALLY POST SECUNDERABAD 500011
IMPROVEMENT / ENHANCEMENT OF SECURITY INFRASTRUCTURE AT AFA HYDERABAD
2022_MES_559949_1
86693/E8
Open Tender
Civil Works
Item Rate
270 days
GE AFA HYDERABAD
AS PER NIT
9 documents required · 9 mandatory
₹1,000
GE AFA HYDERABAD
₹1.5 L
Yes
3 Feb 2023
27 Oct 2022
3 Feb 2023
27 Oct 2022
1 Feb 2023
17 Nov 2022
27 Oct 2022 - 12 Nov 2022
Amount
SCHEDULE 'A' PART -I (B/R PORTION) :- Demolition of brick / stone masonry / PCC block masonry built in cement mortar including all quoins , arches , pillars etc but excluding ashlar facings , dressed stone work pre cast concrete articles complete all as specified and as directed.
Demolition of Reinforced cement concrete in Roofs, floors (other than ground floors), beams staircases,columns, landing, chajjas, and similar suspended work complete all as specified and as directed
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed.
Removal of debris (aggreates of any description) obtained from demolition including loading and unloading to a distance not less than 5.0 KM from the starting piont and deposited where directed etc, complete all as specified and as directed.
Excavating in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth for foundation or etc or for shafts, wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 mtr in depth orgetting out soft / loose soil, complete all as specified and as directed.
Returning, filling in trenches in any kind soil in layers not exc. 25 cm including spreading, levelling, and well ramming complete all as specified and as directed.
Removing excavated material exc 1.50 KM but not exc 5.0 KM distance and depositing where directed, complete all as specified and as directed.
M & L for cement concrete in foundation, filling and mass concrete PCC 1:4:8 mix type D-2 mix using 40 mm graded stone aggregate, completed all as specified and directed.
M&L for Formwork to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical ot to batter, of rough finished flat surface of concrete, complete all as specified and directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work, of rough finished surface (Square, rectangular or polygonal) of concrete, complete all as specified and directed.
M & L for Providing Reinforced Cement Concrete (Design mix M-25), as in foundations, including rafts, footings, foundation beams, plinth beams, basement slabs, under-reamed piles and mass concrete, completed all as specified and as directed.
M & L for Providing Reinforced cement concrete (Design mix M-25), as in Columns, pillars, piers, posts and struts, completed all as specified and as directed.
M&L for Formwork to sides and soffits of floors or roof beams, beam haunchings, gerders, bressummers, lintels, cantilevers, shalves including supports etc. and similar work, of rough finished flat surface of concrete, complete all as specified and as directed.
M & L for Providing Reinforced cement concrete (Design Mix M-25), as in Beams, cantilevers, bressummers, lintels over 1.50 mtr span, completed all as specified and as directed.
M & L for Providing Reinforced cement concrete (Design Mix M-25) as in lintels upto 1.5 mtr clear span, etc. completed all as specified andas as directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, of rough finished flat surface of concrete, complete all as specified and as directed.
M & L for Providing Reinforced cement concrete (Design Mix M-25), as in Chajjas etc, completed all as specified and as directed.
M&L for Formwork to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exceeding 200 mm thick (Horizontal or sloping), of rough finished flat surface of concrete, complete all as specified and as directed.
M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floos and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exec 100 mm but not exceeding 200 mm wide, of rough finished flat surface of concrete, complete all as specified and as directed.
M & L for Providing Reinforced cement concrete (Design Mix M-25), as in Slabs supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves, completed all as specified and as directed.
M&L for Formwork to sides and soffits of RCC cupboad / shalves including supports etc. and similar work, of rough finished flat surface of concrete, complete all as specified and as directed.
M & L for Providing Reinforced cement concrete (Design Mix M-25), as in Cupboard shelves and support wall and similar work etc. completed all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia. and over, cut to length , bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. complete all as specified and as directed.
M&L for mild steel TMT bar 6 mm to 8 mm dia. and over, cut to length , bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. complete all as specified and as directed.
M&L for mild steel TMT bar 6 mm to 10 mm dia. and over, cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. Used in stirrups, spacers and binders, complete all as specified andas directed.
M & L for Providing precast cement concrete solid block masonry PCC 1:3:6 type C-1 mix (using 20 mm graded stone aggregate ) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, completed all as specified and as directed.
M & L for providing cement concrete in cills, steps bands, benching, plinth coarse and coping, side benching around paving etc. in type B-1, PCC 1:2:4 mix using 20 mm graded stone aggregate, completed all as specified and as directed.
M & L for rendering 15 mm thick on other than fair faces of brick work with mixing WPC @ 3% by weight of cement and finished fair and even without using extra cement, in CM 1:4, complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, including finished even and smooth without using extra cement, complete all as specified and as directed.
M & L for Rendering 5 mm thick on fair faces ofconcrete surfaces as on ceiling in cement plaster 1:3 finished even and smooth without using extra cement, complete all as specified and as directed
Supply Only integral water proofing compound (WPC) , complete all as specified and as directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over a coat of 3 mm wall care putty on wall surfaces , completed all as specified and as directed.
M & L for preparation of new plastered surfaces on ceilings and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over a coat of 3 mm wall care putty on ceiling surfaces completed all as specified and as directed.
M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and as directed.
M & L for Hard core of gauge not exc 63 mm deposited ,spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface, used brken stne or boulders, complete all as specified and as directed.
Treating the ATT bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.
Treating the ATT backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
Treating the ATT top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed.
Treating the ATT soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.
Treating the ATT soil along with external perimeter of bldg at the rate of 2.25 litres of emulsion per square metre of the perimeter wall, complete all as specified and as directed.
M & L for 75 mm thick PCC 1:3:6 type C2 (40mm stone aggregate) as in Plinth protection laid in alternative panel including filling of joint with mixture of bitumen and sand (1:3) complete all as specified and as directed
M & L for 25 mm thick cement concrete type B-0 mix , 1:2:4 , (using 12.5 mm graded stone aggregate ) as in floor finishes, complete all as specified and as directed.
M & L for Rendering 10 mm thick backing coat for wall tiles finishes on fair faces of brick work or concrete surfaces in cement plaster 1:4, complete all as specified and as directed.
M & L for Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:6, complete all as specified and as directed.
M & L for Vitrified ceramic tiles dark shade/ double charged, 10 mm thick (square or rectangular) area of each tiles not less than 600mm x 600mm of approved , as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and as directed.
Description all as per Ser item No 46 above but on vertical surfaces like skirting / dado / risers / steps etc complete all as specified and as directed.
M & L for Joint free coloured Glazed ceramic tiles, size 350 mm x 250 mm x 7 mm or 450 mm x 350 mm x 7 mm thick, as in vertical surfaces such as skirting, dados and fountain etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and as directed. (Note :- Colour of tile will be finalized by Engr-In-Charge / GE)
M & L for Joint free non - skid coloured ceramic tiles, 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and as directed.
S&F Factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3.0 mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner including supplying and fixing moulded door frame at site as per specifications and drawing etc complete all as specified and as directed
S & F 2nd class hard wood, plain solid ,straight chowkhats and frames ,wrought, framed rebated on the solid ,rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S & F 35 mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
S & F 35 mm thick, 2nd class hard wood, Glazed/gauged and skeleton door shutters, open, rebated and prepared to receive glass, gauze, etc. with divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.24 (a), complete all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts of extruded section, bolt of size 150 mm long, complete all as specified and as directed.
S & F Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long, completed all as specified and as directed.
S&F 250 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
S &F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and as directed.
S &F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, Type C-21, complete all as specified and as directed.
S &F 300 mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate and fixed, complete all as specified and as directed.
S &F 50 mm size Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and as directed.
S & F 2nd class hard wood, Small fittings such as brackets of any type, latches and hinge blocks, shaped door and window stops and the like, including all necessary labours, article not exc. 200 cu. Cm each, complete all as specified and as directed.
S & F 140 mm long, Floor door stopper of aluminium alloy body and tongue, anodised, with hard drwan steel spring, fixed in floor, completed all as specified and as directed.
M & L Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinary tint ) over a coat of pink primer, complete all as specified and as directed.
Supply Only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, completed all as specified and as directed.
S & F Powder coated aluminium three track window sliding type made out of anodised aluminium extruded section of thickness not less than 1.50 mm, fully glazed with and including 5 mm thick tinted glass, rubber gasket, aluminium beading, suitable fancy type handles, locking device and rollers and including all other required fittings as per standard engg. practice, complete all as specified and as directed.
S & F Powder coated aluminium ventilator side hung type made out of anodised aluminium extruded section of thickness not less than 1.50 mm, including 5 mm thick tinted glass at top and bottom shutter, suitable aluminium hinges 75mm long, 100 mm aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles and including all other required fittings as per standard engg. practice, complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, completed all as specified and as directed.
S & F powder coated aluminium anodised Grill, aparture not exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screw complete all as specified and as directed.
M&L plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in roof padding of average 50 mm thick with water proofing compound @ 3% of cement weight etc. complete all as specified and as directed. Note :- WPC will be measured and paid seperately.
M&L for screed bed or bedding layer of cement mortar 15 mm thick in CM (1:4), for laying APP membrane when PCC is green etc complete all as specified and as directed.
M&L for Cleaning the roof surfaces and applying oil bound bitumen primer @ 0.20 Kg per Sqm providing and laying 4.0 mm thick APP modified water proofing membrane weight not less than 4.0 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centigrade, lengitudinal tensile strength not less than 800N per 5 cm teasing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions and applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.1 Kg / Sqm etc complete all as specified and as directed.
M&L for applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.10 Kg / Sqm etc complete all as specified and as directed.
S&F tubes 15 mm bore , medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floos, complete all as specified and directed.
M&L for Cutting chases pinning in brick / concrete wall, making good to facings where required and pointing in cement mortar 1:3 to ends or adges of wall for fixing of sheets and making good cutting not exc 10 cm girth,complete all as specified and as directed.
S&F tubes 20 mm bore , medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floos, complete all as specified and as directed.
S&F tubes 25 mm bore , medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floos, complete all as specified and as directed.
S & F Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.
S&F CP Bib taps two way with single knobs and wall flange, 15 mm cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.
S & F fancy type stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S & F fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.
S & F Vitreous china wash hand basin , white , flat back, size 580 mm x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.
S & F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts ,flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to fushing pipe ,antisyphonage pipe etc, complete all as specified and as directed.
S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.
S & F 10 litre capacity, PVC valveless, symphonic action type, flushing cistern, low level , white with inlet, ball valve float, and handle including brackets and connections to pipes, complete all as specified and as directed.
S & F Soap dish, vitreous China white, approximate size 160 x 160 x 90 mm, embedded in wall, complete all as specified and as directed.
S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, embedded in wall, complete all as specified and as directed.
S&F 32 mm dia,High density polyethylene pipes (HDPE) of pressure rating of 6 Kgf/sq.cm fixed to wall, ceilings or in floors, complete all as specified and as directed.
S&F health faucet ABS body with 1.0 metre stainless steel braided flexible connection ppe, complete all as specified and as directed.
S&F PVC (SWR) floor traps 75 mm dia, plain with grating including jointing with solvent cement, complete all as specified and as directed.
S & F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, complete all as specified and as directed.
S&F stainless steel gratings fancy type 100 mm dia, hinge or openable type, fixed with suitable solvent cement etc complete all as specified and as directed.
S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical / vertical with closed top), triple layer construction, ISI marked, hoisted and fixed in position, complete all as specified and as directed.
S&F Ball float valve 20 mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210 gms) etc complete all as specified and as directed.
S&F Gun metal globe or gate valves 20 mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.
S&F Gun-metal globe or gate valves 25 mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore fixed with clamps etc, complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110 mm bore etc complete all as specified and as directed.
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 110 mm dia, complete all as specified and as directed.
S&F PVC (SWR) gully traps 125 mm / 110 mm dia with MS grating, setting and jointing with solvent cement, complete all as specified and as directed.
S & F 150 mm bore, Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 mix using 40 mm graded stone aggregate, complete all as specified and as directed.
S & F 150 mm bore, Salt glazed stoneware Bends and taper bends etc , complete all as specified and as directed.
M & L for cement concrete in surface channels, benching and drain etc., type B-1 mix , PCC 1:2:4 using 20 mm graded stone aggregate, completed all as specified and as directed.
M&L for Cutting into existing manholes for connecting new drain of 150 mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1 / 2 round or 3 / 4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, complete all as specified and as directed.
Rough excavation not exceeding 1.5 mtr deep and getting out in hard / dense soil complete all as specified and as directed.
M & L for 50 mm thick cement concrete type B-1 mix , 1:2:4 (using 20 mm graded stone aggregate ) as in sub base of flooring of fountain, with mixing WPC @ 3% by wt of cement weight, complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately under respective items of this schedule.
M&L for Screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes in fountain with mixing WPC @ 3% by wt of cement weight, complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately under respective items of this schedule.
M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces rough finished to receive as backing of wall tiling in fountain etc with mixing WPC @ 3% by wt of cement weight, complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately under respective items of this schedule.
M&L for Mild steel plates, plain or chequered, 5 mm thick or over and including fastening and fixing complete, using ERW or induction butt welding wherever necessary, complete all as specifed and as directed
S&F 1.60 mm thick Mild steel, plain, black sheet, in wall cladding, steel gates and similar works, cut to size, holes punched, including round heads screws, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed.
M&L for Mild steel bolts exc 12 mm and not exc 20 mm in dia, made with J Hook on one end and screwed the other end to be fitted with washers and one hexagonal or square nut. exc 30 cm long also welding wherever necessary, complete all as specifed and as directed
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5 cm long, and diameter of neck in 6 mm, complete all as specified and as directed.
S&F Framed work by using MS angles / Flat irons / Hollow square or rectangular pipes cut to shape, such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, ladders, walk ways, railings, framework of watch rower and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, cut to any shape as peper the site requirements etc fixed with self tapping screws complete all as specified and as directed.
S&F of Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, cut to any shape as peper the site requirements etc fixed with self tapping screws complete all as specified and as directed.
M&L for preparation of newly plastered surfaces and applying two coats of white wash complete all as specified and as directed
Surface excavation not exc 30 cm deep and avraging 15 cm deep and getting out hard / dense soil, complete all as specified and as directed.
M & L 100 mm thick cement concrete type B-2 mix 1:2:4 (using 40 mm graded stone aggregate ) as in flooring / paving including finishing even & smooth w/o using extra cement, complete all as specified and as directed.
Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.
M&L for 100 mm thick PCC 1:4:8 type D-2 mix using 40 mm graded stone aggregate as in sub base of path / paver block complete all as apecified and as directed
M & L for Sand filling of 50 mm thick under pavers, floors or in foundation including watering and consolidation, etc complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc all as specified and as directed.
M&L for Providing plain cement concrete of Type B- 1 mix 1:2:4 (using 20 mm graded stone aggregate) as in kerbs of mud stops, borders, etc,. rounded or chamfered on edges, complete all as specified and as directed.
M&L for 150 mm thick M-15 Design Mix using RMC as in hard standing with VDF etc. complete all as specified and as directed
M & L for forming 12 mm thick and 150 mm deep expansion Joint sfilled with pre formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade 'B' complete all as specified and as directed.
M & L for rendering 15 mm thick on fair faces of brick walls finished with fair and even without using extra cement, in CM 1:4, complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 - 40 cm inner girth in cement concrete , using extra cement ,including forms,moulds , mitred / stopped ends etc complete all as specified and as directed.
M & L for Providing precast cement concrete type B-1 mix 1:2:4 ( using 20 mm graded stone aggregate ) as in landing, cover slabs ( for manholes etc. ) chullah hoods , chajjas , water troughs , shelves and similar articles with plain faces set in cement mortar 1:4, complete all as specified and as directed.
M & L for providing cement concrete as in coping etc. type B-1 mix PCC 1:2:4 using 20 mm graded stone aggregate, complete all as specified and as directed.
M&L for complete removal of existing treatment on surfaces of any description complete all as specified and as directed.
M&L for natural stone wall clading tiles in external surfaces of thickness 15 mm to 18 mm of any size colour and texture as approved and fixing tiles / stones with tile adhesive of Make ROFF TOI of Pedilite or equivalent make including 10 mm thick backing coat plaster in CM 1:4 complete all as specified and as directed. (Note :- Colour / Texture of wall clading tile shall be approved by GE)
S&F of 18 to 20 mm thick Granite work (table rubbed and polished) black coloured in steps, jambs,pillars and cooking platform and like over 10 mm thick backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work as grills etc of any description not otherwise discribed complete all as specified and as directed.
M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), in damaged parapet, chamber and similar work of any description, etc complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 mix (using 12.5 mm graded stone agg) as in coping etc complete all as specified and as directed.
M&L for Making good under cills or Jambs over arches, lintels and bressummers including all pinning when necessary in C M (1:6) etc complete all as specified and as directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings and rendering is to be finished even smooth without using extra cement complete all as specified and as directed.
M & L for preparing on newly painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
Taking down chowkats or steel window/door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.
M&L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m in cement mortar all as specified and as directed.
S & F Pressed steel frames 105 mm x 60 mm size, for doors with single rebates including necessary fixing lugs, lock strick plate, etc, complete all as specified and as directed.
S & F 30 mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
SCHEDULE 'A' PART - II (E/M PORTION) :- M & L for Point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable FRLS with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVC conduit of suitable size but not less than 20mm dia. and all accessories fixed to be consealed in wall & surface of the roof etc., including terminal boxes made out of Mild Steel sheet of thickness should be not lessthan 1.2 mm thick for fixing of switches, fan regulators, socket outlet etc along with suitable 3.0 mm thick top laminated backlite sheet for housing switches, etc complete all as specified and as directed for the following :-
(a) One light point controlled by one switch
(b) One ceiling / Exhaust fan / Wall Fan point controlled by one switch
(c) One socket outlet 3 pin 5 Amps by one switch independent board
Description all as per Ser item No 149 above but with 2.5 sqmm copper cable in and including PVC conduit for 15A socket complete all as specified and as directed.
S&F of ceiling rose, three terminal, PVC / polycarbonate, insulated body, ISI marked complete all as specified and as directed.
S & F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed.
S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed.
S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.
Supply and fixing LED lights fitting 1 x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old LED light fittings complete all as specified and as directed.
M&L for Sub Main wiring with two runs of 06 sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with 01 run of 06.0 sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor cable but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and as directed.
Note:-(i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.
(ii) The wiring shall be done strictly by proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
(iii) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint.
S&F MCB DB SPN 8 way with 200 Amps rated bus bar SPN type 230 volts 50 Hz AC supply including suitable provision for MCB concealed in the wall (concealed) complete all as specified and as directed.
S&F MCB DB SPN 4 way with 200 Amps rated bus bar 230 volts 50 Hz AC supply including suitable provision for MCB concealed in the wall (concealed)/ clamping to iron structure complete all as specified and as directed.
Supply and fix MCB TPN 32 Amps AC 415 Volt 50 hz . complete all as specified and as directed.
Supply and fix MCB SPN 40 Amps AC 230 Volt 50 hz complete all as specified and as directed.
Supply and fix MCB SP 6 to 32 Amps AC 230 Volt 50 hz . complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and rated with brushless direct current motor including taking down old exhaust fan complete all as specified and as directed.
Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star including taking down old ceiling fan complete all as specified and as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rating complete with all accessories complete all as specified and as directed.
Supply and fix PVC connections 15 mm size with PTMT nuts of length 300 mm complete all as specified and as directed.
Supply and fix Angle valve / Stop valve of size 15 mm dia stainless steel complete all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
M&L for Earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electorde connections by using GI earth wire of size 4 mm dia connected by means of bolts, nuts, checknuts and washer of GI or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth strip and 20 mm dia GI pipe medium grade for watering arrabgement and PCC (1:3:6) type C-1 chamber, MS funnel, wire gauge, 50 mm thick RCC complete all as specified and as directed
Taking up / down of LT UG cable any type any size complete all as specified and as directed.
Supply and lay LT UG cable, XLPE Insulated armoured, heavy duty aluminium conductor multistranded, 1100 volts grade of size 50 Sqmm 3½ core cross sectional area laid in trenches/fixing on walls /poles or passing through GI pipe including connecting up with suitable lugs, nuts and bolts wherever required and testing complete all as specified and as directed.
Supply and lay LT UG cable, XLPE Insulated armoured, heavy duty aluminium conductor multistranded, 1100 volts grade of size 10 Sqmm 4 core cross sectional area laid in trenches/fixing on walls /poles or passing through GI pipe including connecting up with suitable lugs, nuts and bolts wherever required and testing complete all as specified and as directed.
Supply and lay LT UG cable, XLPE Insulated armoured, heavy duty aluminium conductor multistranded, 1100 volts grade of size 10 Sqmm 2 core cross sectional area laid in trenches/fixing on walls /poles or passing through GI pipe including connecting up with suitable lugs, nuts and bolts wherever required and testing complete all as specified and as directed.
Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) swan neck type complete with CI base plate and single swan neck complete all as specified and as directed.
Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) swan neck type complete with CI base plate and double swan neck , including taking down old steel tubular poles complete all as specified and as directed.
Supply, installation, testing and commissioning of out door type plateform mounted panel of size 0.45 mtr (H) x 0.30 mtr (W) x 0.20 mtr (D) and made out of 3.15 mm thick CRCA MS sheet vermin proof factory powder coated with 40x6 mm angle totally enclosed with front door opening. All door should have neaprene rubber gasket and locking arrangements with degree of protection IP 54 complete all as specified and as directed. The panel shall be comprising with the following accessories :-
(a) Four pole MCCB 63 amps with breaking capacity of 16 KA having adjustable thermal and fixed magnetic release.
(b) Aluminum Busbars for 3-phase & Neutral of current carrying capacity up to 200 Amps duly mounted on FRP/DMC insulators and necessary drilling for connections and duly covered with heat shrinkable PVC sleeves of standard colour code.
(c) 3 Pole MCB 32 Amps 10 KA-02 Nos
(d) MCB SPN 32 Amps, 10 KA-02 Nos
(e) Analog type timer switch
(f) LED Indicator lamps for RYB with controle MCB
S & F cable junction box 167 mm x 125 mm x 82 mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals with one MCB SP 6 Amps to be fixed inside the box including 03 Nos polymide gland with check nut (M-32-03 Nos) fixed on poles with flat iron clamps of size 25 x 3, nuts, bolts, washers etc including two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer including takingdown old junction box (2 Nos only) complete all as specified and as directed. Make :- HENSELCat No . KF-1010 G or equivalent approved make in SPELSBERG / RITTAL / Denson / Raychem
Supply & fix cable gland double compression type weather proof for 3.5 core 50 Sqmm armoured cable complete all as specified and as directed.
Material & Labour for road cutting to lay LT UG cable including returning filling and making good the distrubed surfaces as per existing PCC/ Road surface complete all as specified and as directed .
M&L for River dry sand cushioning to UG cables (8 cm deep before laying of cable and 15 cm deep over the cable) in trenches including punned thickness up to 18 cm and consolidation, complete all as specified and as directed . Note :- Punned thickness only will be considered for payment.
Supply & lay common burnt, clay building bricks, sub class 'B' designation over the sand cushioning in cable trenched for protection of cables (LT) complete all as specified and as directed
M&L for Sub main wiring with 2 runs of FRLS grade 1100 volt unsheathed PVC insulated cable of single core 2.5 Sqmm (nominal area) multi-stranded copper conductor drawn through non mettalic conduit concealed in walls etc and provision of two runs of FRLS grade 1100 V rated PVC insulated multistranded copper conductor single core 2.5 sqmm for earth continuity complete all as specified and as directed .
M&L Earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electorde connections by using GI earth strip of size 32 x 6 mm dia connected by means of bolts, nuts, checknuts and washer of GI or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth strip and 20 mm dia GI pipe medium grade for watering arrabgement and PCC (1:3:6) type C-1 chamber, MS funnel, wire gauge, 50 mm thick RCC, including taking down old earthing, complete all as specified and as directed
M&L for PCC 1:3:6 type C-1 mix (using 20 mm graded stone aggregate) as in coping / stay of pole etc. including form work & finishing the surfaces even & smooth without using extra cement complete all as specified and as directed .
Supply and fix LED flood light fittings 1x 150 /160 watt LED pressure die cast aluminium housing heat resistant toughned glass with frame , IP-66 protection , uniform distribution with approved design of bracket duly approveed by Eingineer- in -charge ,including taking down old LED flood lights (02 Nos Only) complete all as specified and as directed . Make :- Crompton Cat Part No:- LFLN-150-CDL / Havells Cat Part No:- JITAIRISFLS150LED757PASYMLTG / Luker Cat part No LFL160
S&F MCCB 4 pole 100 Amps, 25 KA breaking capacity, 415Volts 3-phase supply, including taking down old MCCB, complete to be fixed in existing LT panel board complete all as specified and as directed .
M & L for Boring of holes under road, pavement hard standing by using trenchless technology using ultrasound technique and necessary machine to insert pipe of 80 to 100 mm light grade GI pipes with all fittings such as bends, elbows, Tees, etc, for protection of cable complete including all plant & machinaries, alongwih Butt fusion welding machine with all accessories, T&P etc required all as specified and as directed. Note :- Protection pipe will be measured and paid separately
M&L for Tubes 'light grade' galvanised 80 mm dia with all fitting and fixed complete to walls and ceilings or laid on floors / trenches / pole, including taking down old GI pipe complete all as specified and as directed
M&L for HDPE pipe 50 mm dia with all fitting and fixed complete to walls and ceilings or laid on floors / trenches / pole complete all as specified and as directed.
Supply, Laying, jointing and testing GI pipe of 25 mm medium grade laid in trenches / wall / floors / roofs etc in any length with screwed and socket joints together with and including with all galvanised steel fittings such as sockets, elbows, bends, tees, reduces, short pieces, unions, caps, plugs etc complete all as specified and as directed.
Description all as per Ser item No.190 above but of size 40 mm complete all as specified and as directed.
Supply, Laying, jointing and testing GI pipe of 40 mm Light grade laid in trenches/wall/floors/roofs etc in any length with screwed and socket joints together with and including with all galvanised steel fittings such as sockets, elbows, bends, tees, reduces, short pieces, unions, caps, plugs etc complete all as specified and as directed.
Supply and fixing of sub mersible cable three core multi stranded copper conductor cable of 6 sq mm complete all as specified and as directed.
Supply and fixing ,erection of water fountain with the following items and fittings :-
(a).2 HP open well submersible pumpset .1 No.
(b) 1 HP open well submersible pumpset .1 No.
(c) Flat nozzles .2 No.
(d) 25 mm nozzles Brass type. 6 Nos.
(e) decorative water proof lights. 6 Nos.
(f) PVC pipes 40,20 mm 20 +20 Mtrs and required elbows/bends/unions
(g) Controller gate valves.12 Nos
(h) Wiring and sub main wiring for panel board and all fittings.
S&F Pump Control Panel Board made out of 3.15 mm CRCA sheet Double door opening dust and vermin proof top canopy locking arrangement with angle iron support duly painted with 2 coats of powder coated, paint over a coat of red oxide metal primer mounted over Brick platform as per site requirement with and including following accessories duly fixed and prewired with copper conductor cable of suitable size for 2 HP submersible motors complete all as specified and as directed for the following :-
(a) TPN MCCB 32 Amps -01 No Make : L&T/Havells/LEGRAND
(b) DOL Starter suitable for 2 HP - 02 No Make : L&T/ BCH/Seimen
(c) Single phase preventor 02 No MakePowerTech / Minilec
(d) LED type indicating lamp for RYB - 01 set Make : Esbee/Vishno
OM INFRA
Dwarka Pershad Radhey Ramanlal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .