Playground and park at Pammal Village

Amount

Clearing scrub Jungle and Surface dressing of the ground. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 3 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers.

Construction of Embankment with approved Earth materials deposited at site from roadway cutting and excavation from drain and foundation of other structures, graded and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.

Supplying and filling approved RIVER SAND of specified quality for sand pits in play zone area. The rate including the cost of sand, labour charges,tools and tackles,royalties, transportation to site for all leads and lifts, loading, unloading, spreading in layer not exceeding 150 mm thick, watering, ramming, compacting with mechanical compactors and/ or other equipment to specified level all complete and as per the standard specification.

Filling with M - sand in foundation and below pavement for 100mm depth and well watered, rammed and consolidated by power compacter.The rate includes the cost of M sand and labour charges leveling, loading & Unloading and Transportation etc., complete and as per the standard specification. .

Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 cement , 4 sand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer- in-charge

For Foundation and Basement for 1.0 Cum

For Ground Floor Upto 4.5m height

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and laying Interlocking rubber moulded paver 83mm thk of approved sample as per design / drawing made of M40 concrete - 83 mm thick including transportation of the blocks to the site preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 15 mm thick for external surfaces with cement mortar 1:4 (1 of cement : 4 of Manufactured sand) water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of Manufactured sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of Manufactured sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. The rate including cost of all materials, brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.(Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Weathering course-using broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complete complying with relevant standard specification and as directed by the Engineer-in-charge.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three M sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc., The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colour with base mortor in CM 1:3 (1 Cement, 3 M-Sand), 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two M-sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Foamed PVC Door frame : Specification: Providing factory made Pre Laminated FPVC Door Frame of the size 105 X 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre jointed with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Fasteners of 3 nos. to be provided for each vertical member, GI stiffners of ( U channel of size 29 X 9, 1mm, 150mm long) - 3 Nos at hinge point, Frame Reinforcement of (U' GI channel of size 46 X 22 X 0.6mm), bottom tie rod of ('U' GI channel Size of 15 X 15 X 1mm ), etc., Complete complying with the standard Specification. the door frame should be got approved from the Executive before use on work Providing of 35mm thick factory made pre - laminated ABS ( Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent desings consisting of all round frame made out of water proof solid PVC bar of size 20 X 32 mm reinforced by 32 X 32 mm 2 nos ., for vertical made out of LVL core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with pre- laminated ABS sheets thickness of 1.5mm PVC edge bending of size 0.45mm on the vertical sides. hardware made out of steels coated butterfly hinges - 3nos for each shutter and ISI make SS round lock Complete complying with the standadrd Specification . the door shutter and frame should be got approved from the Departmental Engineer before on use

UPVC Window :Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm125GSMand 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates ashandle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong lockingsystems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. Thewindow should be fixed to the wall with 100% packingwith screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supplying and fixing the best quality approved make of bib cock with cp health faucet wall hook 1m long flexible tube angle cock with wall flange incuding cutting and making the walls whereever etc, complete complying with standard specifications and as directed by the departmental officer the quality and make of health faucet should be got approved by concerned department engineer before use of work.

Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc.complete,complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work.

Supplying and fixing in position Mirror of size 500x450mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work.

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc., Rate includes cost of all materials, labour charges and transportation etc., complete with standard specification. The quality and make of Urinal should be got approved by department Engineer before use on work.

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge..

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.

25 mm dia

32 mm dia

40 mm dia

Supplying & fixing in position 15 mm dia brass/ C.P screw down tape (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).

Supplying, laying, jointing and testing of the following sizes of UPVC pipes SCH - 80 of approved quality and best variety conforming to I.S. and with I.S.I mark, including cutting, threading and fixing to UPVC specials, laid properly to alignment but excluding the cost of such specials and fixing to wall with necessary teak - Wood Plugs, GI Clamps and screws,making holes on the wall or drilling holes in the roof and making good the dismantled portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of pipes and specials should be got approved by Executive Engineer before use on work..

20 mm dia UPVC pipe

25 mm dia UPVC pipe

32 mm dia UPVC pipe

40 mm dia UPVC pipe

Providing and placing enamel indication board with proper male or female figure of size 35x30cm at the required places with the proper design and necessary fittings for the board including the labour charges, transport as directed by the engineer in charge.

Supplying and Laying of Alluminium and Reflective Vinyl Name board of requried size with proper design / drawing position, the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supply of Compactor Bin 1100 litres made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Supplying & fixing in position C.I.Nahini trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Supplying and fixing in position the best quality and variety sizes PVC soil waste pipes 6Kg cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work..

110mm dia

75mm dia

Constructing brick masonry manhole with second sort ground moulded (Chamber burnt) bricks in CM 1:5 (one of cement, fivr of sand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate) 20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard specification

Supply and Fixing of Gun Metal Gate valve 25mm diaapproved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).

Bore well

Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs.

Reaming from 200mm dia pilot bore to 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level

Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992

200mm dia CS

200mm dia RS

150mm dia RS

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.

200mm dia CS

200mm dia RS

150mm dia RS

Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.

Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge. from Sump to OHT

Construction of Rain water recharge well (1200mm dia) as per consultant drawing with neccesary connection,(quantation rate)earth work- digging the well for recharge well supply and installation of rainfoced concrete ring -4 feet OD & 1 feet hight, 75 mm think -10 no's supply and installation of inforced concrete slao 4 feet in dia 200 mm thick, and 25 mm perforated -8 mm mild street rods used for reinforcement -1" perforated -1no's supply and installation of rainfoced concreate closing slap 75 mm thick, 8 mm mild steel rods used for rainforcement with 600 mm *600 mm square heavy duty PERFORATED manhole cover.filtration media installation for recharge well unit;40 mm crushed stones-0.5 cum, 20 mm crushed stone -0.5cum, brick sates -0.5 cum,fine sand 0.5 cub mtr,mixture of brick bats.

Supplying and laying of gravel stone / Pebble stone in walking track using M. Sand filling with 180mm thick base layer. As per pattern rawing given by the department officers the rate including of gravelstone, labour charges, transportation, Loading & unloading and curing etc., as per the standadrd Specification and as directed by the Departmental officers

Providing vaccum de-watered flooring operation consisting of providing side shuttering with MS channels, angles to the required levels, Vibrating the concrete by using screed vibrator, de-watering using vacuum pumps by suction method and finishing the top surface to required level and grade using skim floaters/discs/power trowels. (M30 grade concrete will be paid under relavent item). The above works including for mechanical / power trovelling, Providing with 200 micron thick polythene sheet over the PCC surface,providing and mixing Graded fibrillated 100% virgin poly propelene fibres in concrete at the rate of 0.90 kg/cum as per manufacturers specifications, for providing and mixing non - metallic monolithic surface floor hardening compound in concrete at the rate of 5.0kg/m2 as per manufacturers' specifications and for cutting grooves of size 6mmx10mm at control joints and filling the grooves with Sealent (Colpor - 200 from Fosroc chemicals or Poly sulphide sealant (Pedilite / BASF or equivalent make) The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, smooth finishing, application, wastage, equipment, tools and plants, fuel, consumables, curing as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supplying and Fixing Childrens Multi play Equipments in Ankidyne / Equivalent Brand at 5feet-7feet height with product area 19 ft X 17 ft for 10 to 15 kids of 5 -12 years old played at a time and fixing in position. The rate includes the cost of material, transport, surface cleaning slope maintaining and labour charges etc., complete as per drawings and directed by departmental engineers.

Kids Funstation

Rope Climber

See Saw

Swing

Merry go Round

Totlets see saw

Totlets swing

Totlets spring Seating

Supplying and Fixing Outdoor Gym Equipments in approved make and fixing in position. The rate includes the cost of material, transport, surface cleaning slope maintaining and labour charges etc., complete as per drawings and directed by departmental engineers.

Double air walker

Manual Outdoor Chest Press

Outdoor Leg press twister

Four shoulder Wheel

ABS Bord Duo

Combination set of Gym

Pull - up Station

Supplying and Stacking of red earth at site to the departmental guage for Premeasurements which is of light textured, crystalline, porous and firable and not of generally acidic or neutral but not of alkaline and should not of alkaline and shoulde be fertile. The rate including seignior age charges, cost of red earth, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge.

Supply of well decomposed farm yard Manure in a powdery form devoid of soil sand, stones, plastics and other materials highly nutrient and which supports plant Growth. The rate including cost of Manure, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge.

Mixing charges of red soil, sand and manure uniformly (2:1:1) for preparation of soil Mixture (excluding material cost). The rate including labour charges for measuring and mixing charges etc., complete and as directed by Engineer-in-charge.

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness. The rate including cost of hire charges for roller and labour charges for Spreading of redsoil etc., complete and as directed by Engineer-in-charge.

Supplying and Planting washingtonia palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Royal palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting foxtail palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting kentia palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Neolamarica cadamba 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Lagaerstroemia flosreginae purple 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Lagaerstroemia flosreginae pink 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Tabebuia rosea 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Alstonia scolaris 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Spathodea 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Sitha ashoka 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Shembagam tree 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria white 5' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria yellow 5' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria red 5' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria pink 5' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria pudica 6' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nerium tall 2' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Tabernum 2' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Hibisus 2' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Heliconia 2' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ixora singaporenisis 2' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Eugenia 2 ' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Jatropha 2' feet height with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Meyenia erecta 2'Tall with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Spider lilly bushy with stalking including cost of the Plant, transport and labour charges etc all complete.

Providing and laying Precast Seating 1500mm X 890 mm 80mm thick slabs using M30 grade of concrete.Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection each bench consists of 2 nos L - Shaped base support in Cement colour back height 890 mm front height 450 mm and base width 690mm and 1 nos. reinforced concrete plank in red colour of size 1500mm X 425mm X 50mm and bench top & back planks are treated with special anti - corrosive, water proof coating so as to make surfaces glossy and water proof the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works of Pergola, Gate for compound wall and grill at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS plates, flats, squares etc., of various sizes and other structural steel sections conforming to latest IS2062 Grade - A&B including straightening, cutting, welding, bending to shape, bolting and inclusive of the following finishes. The rate including cost of all materials, labour chanrges, scafolding, stagging, transportation, lead & Lifts, wastage, etc., complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. All MS members shall be painted with one coat of zinc chromite primer and 2 Coats of 35 microns DFT of synthetic enamel paint of approved colour and make etc,.The rate includes the cost of all materials,labour,tools,tackle and plants, wastage etc.,as per specification and drawings complete. The rate quoted is to include cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for. The rate to include preparation of fabrication shop drawings for owner's approval.

Planting of G2 grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Design, fabrication and installation of simple vault tensile fabric work and Steel structure using Belgian make tensile polyester fabric, steel frames by ISO standard acclaimed CE certified installer with structural stability vetting from Anna university ,Chennai having using FLUOMAX Coated Architectural Membrane having tensile strength not less than 4300 N/50mm/ 4200 N/50mm (Warp/ Weft) and Tear strength not less than 600 N/ 500 N (Warp/ Weft) of make SIOEN Belgium or equivalent, cables, complete perimeter attachment system, and all normally associated components with machines or Fabrication using swiss make Zund cutting machine and Belgian make Architectural Membrane on 20KW Forsstrom High Frequency Welding Machine with SEAMLESS WELDS 50 mm weld width X 1400 mm- Single Stroke all PVC joints shall be formed to a tolerance of +1mm, -1mm and shall be assembled to ensure that seams are always single laid and attaining seamless finish by that a cut edge does not face uphill and membrane used to have a double lacquering made out of highly concentrated FLUOMAX PVDF on both side, double PVC coating and be weldable without grinding. make sure the fabric have less environmental impact the fabricator has to deliver evidence of REACH conformity as per the European Norms the fabric to have Color light Color light fastness not less than >6 Note in accordance with the German standard DIN 54004, DIN EN ISO 105 B02 and have 15 years manufacturer warranty All Fabric supplied and installed shall be in accordance with this specification and shall be guaranteed against water leakage, faulty materials and Mild steel structure supplied are made of high quality pure steel HR coil and the tubes to conform IS4923/IS1239/IS1161 and to be procured from TATA/JINDAL/APL or equivalent

Electrical Works

Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., RYB indication lamps, internal wirings, Digital voltmeter and Ammeter and other required accessories for the complete operation as per the Tangedco requirements. Necessary approval to be obtained from Tangedco before procurement including all associated control wiring. 1set of with TNEB Metering provision with sealing provision with 63A fuse 1 set and 63A TPN MCCB one of neutral link and all other connected accessories etc,. asper IE norms. For all items in this section, the rate includes necessary supports as required at site. No extra payment will be made for the same. Rate shall inclusive of factory witness test and all accessories, breakers , control wiring, models has to be followed as per in the technical specification.

DG Panel: Supply and erection of floor mounted Outdoor Type DG Panel with suitable to accommodate 63A 4Pole MCCB with rotary handle Switch - 1 Incoming and 40A/32A 3Pole MCCB with rotary handle Switch with rotary handle switch -3 nos .as ougoing supply with the provisions to accommodate and with suitable copper Busbar (1.2A/Sq.mm) chamber and cable chamber with suitable size busbar 4 runs and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shockproof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing.(Switch make : L & T /ABB) panel should be earthing confirming ISI specifications.The panel should be erected as directed by engineer-in charge/department superior engineers

Supply of DG set KG1-20WS Model KOEL Green 20KVA 3 phase (415V) 16kW Diesel Generator set with Standard control panel, comprising of KOEL make Water cooled CPCB-II engine model 2R1040 G1 developing 25.5HP @ 1500 RPM and KOEL Green Alternator, complete with type approved canopy and all accessories. with the following technical specification: Industries most reliable engines, proven over decades. Low emission, High efficiency. Compact, robust and rugged design. Engine Dry type air cleaner Exhaust Silencer (Residential type) Hospital Grade. Expansion bellow Lube oil cooler Lube oil filter (“Spin-on” type) Fuel Filter (“Spin-on” type) In line mono block fuel injection pump with Electronic Governor and fuel feed pump. Dynamically balanced Flywheel with starter ring Electronic Governor: Governing class G2 (as per ISO 8528 part 1) SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.Exhaust gas turbocharger 12 Volt electric starter motor 12 Volt, 10 amps. Battery charging alternator Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button.

ALTERNATOR KOEL GREENmake 20KVA / 16KW Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 20 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank:65 Letters Capacity inbuilt Fuel Consumption: 100% = 5.1Litres/hr.75% =3.8Litres/hr.50% = 2.7Litrs/hr. Battery: 12V DC KOEL GREEN 130AH Supply of Standard Control Panel Suitable for 20KVA DG set for 4EB Services with byepass arrangement.

Supply of DG set KG1-15AS Model KOEL Green 15KVA 3 phase (415V) 12kW Diesel Generator set with Standard control panel, comprising of KOEL make Water cooled engine model HA294 G1 developing 20.5HP @ 1500 RPM and KOEL Green Alternator, complete with type approved canopy and all accessories. with the following technical specification: Industries most reliable engines, proven over decades. Low emission, High efficiency. Compact, robust and rugged design. Engine Dry type air cleaner Exhaust Silencer (Residential type) Hospital Grade. Expansion bellow Lube oil cooler Lube oil filter (“Spin-on” type) Fuel Filter (“Spin-on” type) In line mono block fuel injection pump with Electronic Governor and fuel feed pump. Dynamically balanced Flywheel with starter ring Electronic Governor: Governing class G2 (as per ISO 8528 part 1) SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.Exhaust gas turbocharger 12 Volt electric starter motor 12 Volt, 10 amps. Battery charging alternator Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button.

ALTERNATOR KOEL GREENmake 15KVA / 12KW Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 15 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank:65 Letters Capacity inbuilt Fuel Consumption: 100% = 4 Litres/hr.75% =3 Litres/hr.50% = 2 Litrs/hr. Battery: 12V DC KOEL GREEN 130AH Supply of Standard Control Panel Suitable for 15KVA DG set for 4EB Services with byepass arrangement.

Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only

Supply and fixing of 8 way vertical TPMCB sheet steel Industrial Type TPMCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 4 Nos.of 32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections)

Supply and fixing of 12way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1No. 32A 30 MA 4 Pole ELCB as incoming and 4 Nos. 6A to 32A SP MCB outgoing in flush with wall.The MCB DB and MCB's should be with ISI mark (like standard make)

External Lighting Luminaries

The warrantee for 5 years should be provided for all lighting luminaries including LED's and drivers.

Supply, fixing, testing and commissioning of the following lighting luminaires including all necessary accessories like electronic choke, starter, holder, control gear, driver units, lamps , fixing accessories, down rod, chain suspender, hooks, supporting arrangements, clamps, ms angle supports, lamps, mounting bracket, flexible cable connection from the junction/connector box to the light fixture , foundation of poles, high mast , the rate includes necessary connected minor civil works if required and necessary suitable loop in loop out connector,joints,glands supports as required at site. No extra payment will be made for the same.

Supply, Installation, Testing & Commissioning of 350W LED Floodlight Fitting with necessary GI bracket / MS with powder coated bracket and all necessary fixing accessories. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. Colour Temperature should be 5700°K ±300°K and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be 350W with lumen package as per requirement. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire . The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and COB’s are not permitted. Crompton CAT REF : - CFS-501-350-57-60D-HL3-GL/NBK/ Equivalent.

Supply and installation of 9M Mini high mast suitable for 50 m/sec wind speed, with 1.5 mtr Dia Semi Circular frame suitable to install 4 nos of 350W luminaries with counter weight arrangements , mounting clamp and brackets etc. Internal wiring material shall be from JB to individual luminaire & MCB in base compartment are included and are a part of installation, foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. The foundation shall be with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour, GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs, MCB and all labour. The rate is inclusive of Freigh Charges, Insurance Cost, Loading and Unloading Charges. Contractor to get structural approval from the Civil team for the highmast foundation

Supply and installation of 16M high mast shaft in two sections suitable for 50 m/sec wind speed, with head frame, winch mounting bracket, luminaries carriage suitable to install 8-12 nos luminaries (Semi- circle arrangement) with counter weight arrangements , mounting clamp and brackets etc. Raising ,lowering system comprising double drum winch, suitable SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lighting finial, Lightning spike if require,wiring material from JB to individual luminaire & MCB in base compartment are included and are a part of installation, foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. LED Single dome aviation obstruction light, outdoor stand mounted feeder pillar with 63A 4pole RCCB with 100mA, single dial time switch, 45A TP contactor for the automatic switching of luminaries , power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 25 & 4.0 sq. mm terminals, shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour, GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour(2nos per mast required) , wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs, MCB and all labour,mast feeder pillar by grouting the stand in concrete. with all necessary components for the complete functional operation. Contractor to get structural approval from the Civil team for the highmast foundation

Supply, erection, testing and commissioning of 8 mtr free standing Single arm bracket 8 sided octagonally continuosly tapered strcutured pole with base plate of size 300 x300 x 12mm as per IS-875 along with 120W LED fitting with following specification. Bottom pole dia -130mm,Top Pole dia -70mm , Thickness of pole -3mm.The pole should be hot dip galvanized confirming to BESN ISO - 1461 with thickness of 65 Micron. Construction of pillar accommodating MCB and switch housed in weather proof box including wiring to the light fittings with 2 runs of 2.5 Sq.mm PVC insulated copper conductor, supplying and fixing 4 way 30 A rated terminal block loop in loop out cable arrangements coil earthing etc. the rate shall included for cable in and out throught GI pipe. The pole shall be as required by the Engineer in charge and complete with suitable pressure die cast aluminum housing also adhering to the above said specifications.Note:-The rate shall be quoted for complete set of Pole, Base foundation,Anchor fastener,internal wiring,earting materials,6A DP MCB box and all necessary accessories and civil cost etc should be provided as suitable to the requirement

Supply, erection, testing and commissioning of 8 mtr free standing double arm bracket 8 sided octagonally continuosly tapered strcutured pole with base plate of size 300 x300 x 12mm as per IS-875 along with 2 nos of 120W LED fitting with following specification. Bottom pole dia -130mm,Top Pole dia -70mm , Thickness of pole -3mm.The pole should be hot dip galvanized confirming to BESN ISO - 1461 with thickness of 65 Micron. Construction of pillar accommodating MCB and switch housed in weather proof box including wiring to the light fittings with 2 runs of 2.5 Sq.mm PVC insulated copper conductor, supplying and fixing 4 way 30 A rated terminal block loop in loop out cable arrangements coil earthing etc. the rate shall included for cable in and out throught pipe.The pole shall be as required by the Engineer in charge and complete with suitable pressure die cast aluminum housing also adhering to the above said specifications.Note:-The rate shall be quoted for complete set of Pole ,,Base foundation,Anchor fastener,internal wiring,earting materials,6A DP MCB box and all necessary accessories and civil cost etc should be provided as suitable to the requirement

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply, Installation, Testing & Commissioning of 10W LED bollard light fittings Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be require with lumen package as per requirement. Crompton CAT REF : - LBLA3-10-CDL / Equivalent-(LANDSCAPE LIGHT). rate shall inclusive of necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application .

Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.

Supply and fixing of WT Bulk Head fitting with guard suitable for 15W LED lamp (Philips/bajaj/crompton/K.Lite )

Supply and Fixing of 48W LED Street Light Fitting with LED with PVC unsheathed copper leads from terminals to the fitting and Suitable LED Street Light Pipe with suitable Clamps and Crews etc, Complete.(GI) (Make:Crompton/ Philips/Havells)

Supplying, installation, testing and commissioning of 1200 mm (48") sweep AC ceiling fan complete with out modular type stepped electronic 300W regulator, with 1 metre down rod with all required accessories.including point wiring ( 5 STAR )

Supply and fixing of 375mm(15")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc,(8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement ) Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height

Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 3 1/2 core x 70 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 Core x 70 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 3 1/2 core x 50 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 Core x 50Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and Laying of 31/2 x 25sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 3 1/2 core x 25 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 4C x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Wiring, testing and commissioning of 2Rx1.5 sqmm (22/0.3) and 1R x 2.5sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories in flush with manufacturer's GI metal back box and 6A modular switch in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, and making good of the concealed portion with suitable colour for PVC concealed light point and Fan point)(4 points per Coil)

Supply, run, testing and commissioning of 3 Run 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply, run, testing and commissioning of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of Grade in suitable MS Conduit pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour.earth wire connection of 2.5 sq.mm wire PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour (for Bus bay fitting, 15 Amps socket, 20 Amps AC socket)

Supply and fixing of manufacturer's GI metal back box and 3 nos of 6A modular switch, 3nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.

Supply and fixing of manufacturer's GI metal back box and 16A modular switch, 6/16A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.

Supply and Run of 25 x 6mm tinned copper flat with necessary clamps/supports on wall/floor/ground for earth connection.

Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp.

Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive

25mm x 6mm GI Flat (M-2142)

25mm x 3mm GI Flat

No8 SWG copper (M-1571)

No8 SWG GI

FIRE SAFETY

First Aid Box complete with all First Aid Medicines (M-1977)

Shock Treatment Chart fixed in glass frame (M-1978)

Danger Board as required by the Electrical Authorities (M-1981)

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms (M-1982)

Supply, Installation, Testing and commissioning of 16 channel NVR with 4TB HDD * 4nos, Up to 16-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback. (Make: Hikvision/Dahua/Panasonic)

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and OFC patch of OFC Single mode Media Convertor with configaration charges etc.,

Supply and fixing of outdoor 4X6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply, run, testing and commissioning of 3 Run 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply and fixing of 3nos 6A, 5 pin socket controlled by 3 nos 6A switch, modular type in suitable size Modular plate and enclosed in a 9 Module Manufacturer's Box complete with interconnections and earthing rate should include all the necessary labour charges to complete the work for NVRs and Monitors.

Supply and laying of armoured, Singlemode, Thermoplastic Tape Inner Sheathed, PVC type sheathed 6 core Optical Fibre Cable with unique fiber excess length control method provides the cable with excellent mechanical and environmental properties and Cable - 2 Embedded FRP provides tensile strength & Anti-buckling properties. It is processed with Filling jelly - Thixotropic jelly to prevent Water ingress in loose tube.

Fixing and Termination of Optical Fibre Cable Single Point ( Point to Point ) Splicing and arrangement charges.

Supply and fixing of 24 Port 2SFP with Module, PoE Giga Range Lan Switch.• 24 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem including Optical Fiber Cable connecting network accessories. (Make: DLINK, NETGEAR,TPLINK)

Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)

Supply and fixing of Out Door Wheather Proof Box 2Ft x 2Ft Out Door Wheather Proof Box 2Ft x 2Ft )

Supply and fixing of OFC PVC Black Colour Box 1'x 3/4' x2 PVC Black colour Box "

Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with LIU unit and fan extra for the above rack.

Supply and fixing of 2 feet CCTV Camera Stand with attachment fittings as follows: * Weather heads and couplings * Cabinet mounting fittings, plates, brackets as needed. * Reinforced couplings for wire entrances to cabinets.

Supply and Instalatin for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up

Supply and Instalatin for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 1 Hours back up

Supply,Erection of 8m Free Standing 8sided Octogonally continously tapered structured pole with base plate of size 300x300x12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hotdip galvanized confirming to BESN ISO 1461 with thickness of 65 Micron with foundation Charges

Cutting the Existing concrete Road using Diamond Hand Saw capable for cutting to a maximum depth of 250mm with out causing vibration.The rate inclusive of rent and usage charges of Diamond saw cutter machine, labour charges, necessary fuel for running the machine etc complete.

Dismantling the Plain Cement Concrete and clearing away from the same 50m away from the site and roughing the surface etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Laying in position the best quality and 40mm dia HDPE pipes of ISI mark etc., with standard specification.

Supply and filling in foundation and basement with M sand / filling sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification.

Providing and relaying Plain Cement Concrete 1:2:4 (One cement Two sand and ten broken Machine crushed stone jelly ) using HBG Machine crushed stone jelly of size 20mm gauge for founding and basement including de-watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.

PA System

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent)

Supply,Installation, Testing & Commisioning of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent)

Supply, run, testing and commissioning of 3 Run 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply and fixing of manufacturer's GI metal back box and 16A modular switch, 6/16A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.

Supply,Installation, Testing & Commisioning of Cordless mic UHF model.(Make:-ACM66 Ahuja/bosch/its equivalent)

C.V.T ENTERPRISES