PETTY REPAIRS AND DAY TO DAY COMPLAINS OF MH, AMC UNIT AND OFFICER MD ACCN UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Material and labour 15mm thick in cement mortar (1:6) on fair faces brick/ concrete surfaces with finished even and smooth without using extra cement in patches n. exc. 3 sqm in each including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of oil bound distemper after preparation of new surfaces complete all as specified and directed.

Material and labour 15mm thick in cement mortar (1:4) on other than fair faces brick/ concrete surfaces with finished even and smooth without using extra cement in patches n. exc. 3 sqm in each including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of cement base paint after preparation of new surfaces complete all as specified and directed.

Material and labour flush pointing in cement mortar (1:3) on roof top of building after racking out joints/ pointing to brick work including removing vegetation/ grass from the roof surface complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Ser item No 5.00 above but except brick work

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick/stone masonry any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 12mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over one coat of chalk whiting complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour vitrified ceramic tiles 10mm thick, dark shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.

All as per item No. 14.00 but light shade

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour vitrified ceramic tiles 10mm thick, dark shade as approved, polished area of each tiles n. exc. 0.36 Sqm (vertical surface) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering 15mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed.

Material and labour non skid ceramic coloured tiles (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 300 x 200 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floor, apron etc complete all as specified and directed

Material and labour Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour Makrana white marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and jointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed

Material and labour machine cut Kota stone slab 20-25mm thick as in flooring and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring in patches n. exc. 5 Sqm in each patch finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Material and labour chequered cement concrete coloured tiles 25cm x 25cm x 20 to 22mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hard standings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator laid over and including 25mm thick sand cushioning complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to faciliate demolition complete all as specified and directed.

Material and labour reinforced cement concrete (1:1½:3) using 20mm graded stone aggregate as in slabs supported on wall, beams and columns in floor, roof, landing, balconies, canopias, deck slabs and in slef complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc also splays between floors and beams Complete all as specified.

Material and labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repair complete all as specified and directed.

Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed in repairs complete all as specified and directed.

Supply and fixing in repair continuous (piano) hinges 40mm width of flaps, mild steel, bright finish or electro galvanized with cupboard or drawers complete all as specified and directed

Supply and fixing in repairs aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long all as specified and directed.

Supply and fixing MS barrel tower bolt, 200mm long stove enameled black with bright bolt and fixed in repairs complete all as specified and directed

Supply and fixing in repairs 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame fixed in repairs complete all as specified and directed.

All as per item No. 42.00 but 75mm

Supply and fixing in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

Supply and fixing in repair extruded aluminium alloy handles, fabricated type, anodised, 125mm size, all as specified and directed.

Supply and fixing mild steel pressed handles, oval type, stove enameled black 125mm size complete fixed in repairs all as specified and directed.

Supply and fixing in repairs 40mm dia powder coated cupboard knobs fixed with nut screws and washer of mild steel bright finish powder coated complete all as specified.

Supply and fixing in repair MS peg set of 6 chromium plated 45cm long fixed with MS screws complete all as specified and directed.

Supply and fixing in repair mild steel handle left or right side for window duly painted with black Japan paint complete all as specified and directed.

Material and labour 25mm dia mild steel pipe curtain rod, powder coated fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.

Supply and fixing in repairs curtain brackets suitable for 19/25mm bore curtain rod etc complete all as specified

Supply and fixing 50mm wide 3 to 6mm thick tapered rubber beading fixed to door shutter with nails fixed in repairs complete all as specified

Supply and fixing in repairs floor door stopper (double) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified.

Supply and fixing in repair 100mm size hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

Supply and fixing in repair aluminium corrugated nosing strip of size 100 x 5mm for stair case fixed with screws complete all as specified and directed

Material and labour galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples fixed in repair complete all as specified and directed.

Material and labour hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 3mm thick square n.exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.

All as per Srl Item No. 57.00 here-in-before but exc 0.50 Sqm in each pane

All as per Srl Item No. 57.00 here-in-before but 3mm thick figured glass pin headed type

Supply and fixing 5mm thick glass for aluminium door and windows/ ventilators including rubber bedding, clipping and other glass fitting complete all as specified and directed

Material and labour for petty repairs to plaster, floor, plinth etc. and the like in cement mortar (1:4) including preparation roughing and cleaning the surface, making good, finishing even and smooth without using extra cement in patches area n. exc. 2.00 sqm each patch complete all as specified.

Re-securing or easing and adjusting door shutter without taking down shutters of any description, area exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

All as per item No. 62.00 but n.exc. 1 sqm each

Material and labour petty repairs to PVC door shutter by making minor adjustment to hinges etc easing of shutter including taking down of shutter if required complete all as specified and directed.

Supply and fixing in repairs 2nd class hard wood plain fillets; square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads, sectional area exc. 3 sqcm and n. exc. 6 sqcm duly painted with one coat of synthetic enamel paint over a coat of pink wood primer complete all as specified and directed.

Supply and fixing in repairs 2nd class hard wood plain fillets; square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads, sectional area exc. 06 sqcm and n. exc. 13 sqcm duly painted with one coat of synthetic enamel paint over a coat of pink wood primer complete all as specified and directed.

Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30mm x 40mm long embedded in cement mortar (1:3) and two new side MS clips and fixed with MS screws complete, the length of pelmet n. exc. 1.5m complete all as specified.

Petty repairs to cupboard (kitchen) including easing of cupboard shutters including taking down and re-fixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cupboard irrespective in numbers of shutters and drawers) complete all as specified.

All as per ser item No. 68.00 above but cupboard (bed room) excluding drawers complete all as specified.

Material and labour petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys complete all as specified and directed.

Material and labour petty repairs to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making it serviceable complete all as specified and directed.

Supply and fixing 9mm thick plywood, grade BWR type BB (No. of ply 5) fixed with screw to timber framework as in shutters, shelves etc., fixed in repair complete all as specified and directed.

Supply and fixing 12mm thick plywood, grade BWR type BB (No. of ply 7) fixed with screw to timber framework as in shutters, shelves etc., fixed in repair complete all as specified and directed.

Taking down aluminium door shutter including floor door closer, removing glass with beading before taking down and re-fixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified

Material and labour 18/19mm thick pre-laminated particle board, exterior grade, pre-laminated both sides with decorative choice laminations fixed with screws to timber frame work in cupboard shutters as in repairs complete all as specified and directed.

Material and labour in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc. 1.5 Sqm each door/ window complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each door/ window complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

Material and labour 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

Supply and fixing pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fixing in repairs 5mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and directed

Supply and fixing cast iron body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified.

Material and labour petty repair to leaking PVC/ brass tap/ stop cock of any type/ size with replacement of washer/ jumper etc. complete all as specified and directed.

Material and labour petty repair to leaking high/ low level flushing cistern including adjustment in the internal fittings, repairs to PVC bends pipe etc all as per directed by Engineer-in-Charge.

Cleaning of air lock in GI pipe and making the water supply available upto water taps including rectifying defects in water supply lines complete all as specified.

Supply and fixing in repair 15mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Minimum weight - 90gm) complete all as specified and directed.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified

Supply and fixing in repairs brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type) complete all as specified and directed.

Supply and fixing in repairs 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and capacity and fixed complete all as specified

Supply and fixing 32mm dia PVC waste pipe for wash basin and urinal all as specified.

Supply and fixing 50mm dia PVC waste pipe for urinal all as specified.

Supply and fixing in repairs 125mm chromium plated brass shower rose with swivel joints including fixing to steel pipe of union complete all as specified and directed.

Supply and fixing in repair mild steel CP grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed.

Supply and fixing in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete all as specified and directed.

Supply and fixing 40mm bore size waste fitting brass chromium plated for kitchen sink china ware fixed in repairs complete all as specified.

Supply and fixing in repair mild steel angle iron bracket for WHB and kitchen sinks including making good to existing surface including taking down WHB/ sink and re-fixing the same complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Material and labour 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour re-fixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Dismantling of water tanks any type of capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position as in repairs all as specified in SSR Part I, complete all as specified & directed.

Dismantling of water tanks any type of capacity exc 500 ltrs and n.exc 1000 ltrs and removing to store complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position as in repairs all as specified in SSR Part I, complete all as specified & directed.

Dismantling of water tanks any type of capacity exc 1000 ltrs and n.exc 2000 ltrs and removing to store complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 2000 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position as in repairs all as specified in SSR Part I, complete all as specified & directed.

Material and labour ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule and fixed complete all as specified

Supply and fixing in repair HDPE PVC lid (Cover) for 1000 ltrs capacity PVC tank complete all as specified and directed

All as per item No. 122.00 but 500 ltrs

Cleaning of over head tank of any description and capacity exc. 250 litres but n. exc. 500 litres de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing as site requirement complete all as specified. Note:-Date of cleaning to be written on the tank with white paint

Cleaning of over head tank of any description and capacity exc. 500 litres but n. exc. 1000 litres de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing as site requirement complete all as specified. Note:-Date of cleaning to be written on the tank with white paint

Cleaning of over head tank of any description and capacity exc. 1000 litres but n. exc. 2000 litres de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing as site requirement complete all as specified. Note:-Date of cleaning to be written on the tank with white paint

Supply and fixing in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 15mm bore complete all as specified and directed

All as per item No. 127.00 but 20mm bore

Supply and fixing CP 15mm dia half turn knobs for concealed stop cock, bib cocks and angle valves complete all as specified and directed

Supply and fixing CP 15mm dia full turn knobs for concealed stop cock, bib cocks and angle valves complete all as specified and directed

Supply and fixing in repair CI bends (any radius) diminishing pieces or tappers 75mm dia complete all as specified and directed

All as per item No. 131.00 but 100mm dia

Supply and fixing in repairs cast iron spun type pipe 75mm dia fixed to walls etc complete all as specified and directed

All as per item No. 133.00 but 100mm dia

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing in repair cast iron oval access door plates with nut and washers suitable for 75mm dia CI waste pipes fixed upto four storey height complete all as specified and directed

All as per item No. 139.00 but 100mm dia

Cleaning blockage in rain water pipe by removing the CP grating and rodding etc & removing & cleaning and refixing old grating in position in cement mortar (1:6) complete all as specified and directed

Supply and fixing steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two open-able leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter:- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Wire mesh and painted shall be measured and paid separately under respective item of schedule.

All as per ser item No. 142.00 but gauged shutters without sash bars.

All as per ser item No. 142.00 but as in ventilators fixed type

Material and labour second class hardwood in scantling wrought as in timber framed and fixed complete all as specified

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fixing 12mm thick perforated particle board/ tiles for insulation and acoustic purpose, 60cm x 60cm size fixed with staples of anodized aluminium snap grid of size 605mm x 605mm framework for false ceiling including necessary GI wire hangers 3mm dia for securing frame work to ceiling, and also including necessary notching and prepared holes including two coat of oil emulsion distemper complete as specified and directed.

Material and labour plain gypsum board 12mm thick as in ceiling in approved pattern jointed and sealed with sealing compound and pasted with adhesive as per manufacturer’s instruction including GI frame work in horizontal as well as in sloped surfaces, necessary cutting and making good to wall complete and provided two coat of oil bound distemper to ceiling surfaces all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Material and labour 6mm thick asbestos cement fiber corrugated /semi corrugated sheets as in roof coverings fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Supply and fixing rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-290. Gde-E-165 including one shop coat of zinc chromate primer paint a (incl preparation of surface) before fabrication all as specified and directed.

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhat etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Demolition of cement concrete in ground floor and paving/ sunken portion (below or above ground level) complete all as specified and directed.

Material and labour cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion complete all as specified and directed.

Material and labour rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over a coat of primer @ 0.3 litre per sqm over the roof surface including cleaning surfaces complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified complete all as specified and directed.

Material and labour for petty repair to steel rolling shutter of any size and any description including repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, greasing, safety level locks mild steel with 4 leavers etc and making the shutters serviceable complete all as per existing pattern as specified.

Supply and fixing in repairs bib taps, brass, fancy type, chromium plated for 15mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed

All as per ser item No. 161.00 but long body

Supply and fixing in repair 15mm bore standard PTMT bib tap of any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket fixed in repairs complete all as specified and directed.

Supply and fixing in repairs PVC internal fittings for low level flushing cistern complete all as specified

Supply and fixing in repairs PVC connection 15mm bore size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs complete all as specified and directed.

Supply and fixing toilet cabinet made out of white acrylic sheet 1.5mm thick of size 450 x 300 x 90mm with looking mirror 450 x 270mm fixed on the shutter and with suitable shelving arrangement in replacement of existing looking mirror/wooden cabinet and repairing the disturbed surfaces to match with existing, fixed in repair complete all as specified and directed

Supply and fixing 1200mm x 900mm x 200mm kitchen plate rack made of stainless steel 1mm thick of trade pattern, fixed in repairs complete all as specified

Supply and fixing sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed.

Supply and fixing sink with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.

Supply and fixing hot and cold WHB mixer fancy type single or double legged of brass chromium plated, screwed down high pressure, screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed to wash hand basin complete all as specified and directed. Make: Jaquar or equivalent from Group 1 in Appendix ‘B’ to Particular Specifications.

Supply and fixing in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower with & including hand shower (health faucet) ABS body including 8mm dia flexible tube 1 mtr long & wall hook complete all as specified. Make: Jaquar cat ref CON-281 KN & ALD-CHR-593 or equivalent from Group 1 in Appendix ‘B’ to Particular Specifications.

Supply and fixing chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality complete all as specified and directed.

Supply and fixing in repairs GI/ UPVC fittings like socket elbow, tee, nipple etc suitable for 15mm bore pipe complete all as specified and directed

Supply and fixing in repairs GI/ UPVC fittings like socket elbow, tee, nipple etc suitable for 20mm bore pipe complete all as specified and directed

Supply and fixing in repairs GI/ UPVC union socket suitable for 15mm bore pipe complete all as specified and directed

Supply and fixing in repairs GI/ UPVC union socket suitable for 20mm bore pipe complete all as specified and directed

Supply and fixing solid PVC wall lining consisting of 5mm thick wood grain PVC sheet, solvent cement and fixing at site on PVC frame complete all as specified and directed

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing to wall to make PVC frame as per specifications and drawing

Material and labour for providing 35mm thick (Measured solid) Precast Cement concrete louvers and jallies in Pcc(1:2:4), type B-0 (Using 12.5mm) graded stone aggregate including all mouldings but (excluding frames), set in cement mortar (1:4) complete all as specified and directed.

M/s Sanjiv Kumar