MP Scheme 2025-2026 Thathiravadi Toilet

Amount

Earthwork excavating and depositing on bank with in initial lead & lift for all loose soil, sub soil, black cotton soil, murram gravelly soil, hard re earth, shales, except hadr rock requiring blasting, etc., Complete as per SS 20 B. for foundation.

Cement Concrete 1:4:8 ( One Cement Four sand and Eigte aggregate ) using 40 mm ISS HBG metal, including cost and conveyance of materials to site, labour charges for mixing, laying, finishing, compacting, curing etc.complete.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforcement Cement Concrete 1:1/2:3 (One cement, One & Half sand, Three aggregate ) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.

Collection supply of Well Gravel from approved quarry and filling the same in layer by layer, each layer not execeeding 15cm thick, including cost and conveyance of sand to site and labour charges for for filling, watering, tamping etc. complete

Brickwork in cement mortar 1:5 ( one cement and five sand ), mix using well burned new country bricks, including cost and conveyance of all materials to site, labour charges for mixing, laying, finishing, symaltaneously pointing with same morter, watering etc.complete.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of M. Sand )) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of M. Sand ), 20mm thick laid in-situ and pointed with same coloured cement

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRL Scopper conductorcable of 1100 Vgrade insuitable heavy gauge MS conduit pipe on wal land ceiling with MS accessories with switch box with 5AFT switch in flush with walland covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connectionof 1.5 sq.mm copper wire for light point / fan point (for electronic regulator)

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing of pvc special and pvc pipe materials including cost of all materials to site, loading and unloading charge and labour cost and conveying charge etc.., complete with standard specification

90mm dia PVC pipe

90mm dia PVC bend

90mm dia PVC Tee

90mm dia PVC Dummy

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportaion and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

1000 Litres