Stock Storage of various buildings under JS Division Arki Tehsil Arki District Solan HP SH_ Repair of class III rest house Arki

Amount

Removal of slips in all kind of soil (including saturated soil but excluding boulders and rcoky portion requiring blasting upto a distance of 20 meters disposing of un-serviceable materials,stacking serviceable materials and neatly dressing the surface up to all leads and lifts complete in all respects.

Excavation in foundation, trenches etc. earth work in all type of soil such as pick work, jumper work, blasting work kankar,mooram singles including decomposed soft and hard rock etc. upto all heights stacking the excavated earth not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths and sides of foundation etc.consolidating each deposited layer by raming and watering and then disposing of all surplus excavated earth upto all leads and lifts as directed by the Engineer in charge complete in all respects.

Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work in:

Foundation & plinth including carriage of materials upto all leads and lifts complete in all respects.

Walls including attached buttresses, pilasters, plinth and their caps and basis and string courses etc. upto floor two level including all leads and lifts etc.complete in all respects

Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Suspended floors, roofs,landings,shelves and their supports,balconies,beams, and girders,bressumers and cantilevers upto floor two level including all leads and lifts etc.complete in all respects.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.

Demolation of brick work above grond level upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials with in 20 meters lead in cement motor including carriage of materials up to all leads and lifts complete in all respects.

Brick work using common burnt clay building bricks in foundation & plinth in CM. 1:6 super structurs above plinth level upto floor two level (Second Class Bricks)

Half brick masonary in common burnt clay building bricks in Cement mortar 1:4 (!Cement: 4Sand) 2nd class bricks including carriage of materials upto all leads and lifts complete in all respects,

20mm cement plaster in two coats backing coat 15mm and finishing coat 5mm thick on on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrases ,internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm in girth and finished even and smooth with cement motor 1:4(1cement:4 sand) complete in all respects.

White/Gray glazed tiles 6mm thick in walls/ skirting, risers of steps and dado 12mm thick cement mortar 1:3(1cement:3sand) and jointed with cement slurry including carriage of materials upto all leads and lifts complete in all respects.

Providing and laying spartic ceremic tiles 5.5mm thick in flooring (300x300mm size) treads of steps laid on a bed of 12mm thick cement mortar 1:3 (1Cement:3Sand) finished with flush pointing in white cement including carriage of materials upto all leads and lifts complete in all respects.

Supply & fixing glass pans with putty and nails including removal of broken glass panes whereever necessary : plain glass 4mm thick including carriage of materials upto all leads and lifts complete in all respects.

Steel work welded in built up sections including cutting, hoisting, fixing, in position and applying a priming coat of red lead paint :

In trusses and trussed purlins in buildings complete in all respects.

In grating framed guard, bars, ledders, railing, brackets and similar works including carriage of materials upto all leads and lifts complete in all respects.

Providing and fixing 0.60mm thick prepaainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic of 20 microns over 5 microns primer coating to back coat ofpolyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accesories as required as per the direction of Engineer- in Charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick thick prepaainted steel sheest in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia & prepainted G.I limpet and bitumen washers complete with all accesories as required as per the direction of Engineer- in Charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facial/soffits/ceilling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer- in- chrge (base members of steel work shall be measured & paid for separtely)

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of mterials upto all leads and lifts complete in all respects.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 Cement :3 Sand: 6 graded stone aggregate 20mm nominal size) including carriage of materials upto all leads and lifts complete in all respect.

Providing and laying Cement concrete 1:4:8(1Cement:4 Sand:8 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in: foundation and plinth including carriage of materials upto all leads and lifts complete in all respects.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter andscoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome.

Painting two coats (excluding priming cost on new steel and other metal surfaces eith enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters :--Enamel paint other than white:

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials complete in all respect.

Painting one coat (excluding priming coat) on previously painted wood and based surface with ready mixed paint brushing to give and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping stopping with ready mixed paint other than white including all leads and lifts complete in all respect.

Wall painting ( Two coat) with plastic emulusion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material upto all leads and lifts complete in all respects.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes(heavy grade) tube fitting and clamps including making good the wall ceiling and floor including carriage of materials upto all leads and lifts complete in all respect.

Providing and fixing automatic flushing cisten with a pair of C.I. or M.S. brackets complete with fitting including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) including carriage of materials upto all leads and lifts complete in all respects. 10 liters capacity.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carrige of materials upto all leads nd lifts complete in all respects. Flat black 630mm x 450mm .

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer including carrage of materials upto all leads and lifts complete in all respects.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws: 700mmx20mm including carrage of materials upto all leads and lifts complete in all respects.

Providing and fixing soap trays (steel: Recessed soap tray 150mmx150mm size including carriage of materials upto all leads and lifts complete in all respects.

Providing and fixing C.P. Brass bib tap with Capstan head 15mm dia incuding carriage of materials upto all leads and lifts complete in all respects.

Providing and fixing C.P. Brass pillar tap with Capstan head 15mm dia incuding carriage of materials upto all leads and lifts complete in all respects..

Providing and fixing C.P. Brass angle valve 15mm without Nuts and pipe including carriage of materials upto all leads and lifts complete in all respects.

Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore including carriage of materials upto all leads and lifts complete in all

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, costr of cutting and making good the wll and floor etc. 110x75mm including carriage of materials upto all leads and lifts complete in all respect.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. 110mm dia including carriage of materials upto all leads and lifts complete in all respects.

Providing ans fixing PVC plain bend ISI marked including fixing with approved adhesive etc. Including carriage of materials upto all leads and lifts complete in all respects.

Wiring for light point Fan point/Exhaust fan/Call bell point with 1.5mm2 PVC insulated heat resistant flame retardant (HRFR) and low smoke single core(flexible)copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 sq.mm (HRFRLS/ PVC insulated single core copper conductor cable as required Group-B including all leads and lifts complete in all respects.

Wiring for circuit sub main with following size PVC insulated heat resistant flame retardant (HRFR) and Low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respects

2x2.5Sq.mm

Wiring for circuit sub main with following size PVC insulated heat resistant flame retardant (HRFR) and Low smoke single core(flexible)copper conductor cable in PVC casing and capping along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respects

2x2.5Sq.mm

Supply and fixing following rating double pole, 240 volts , isolator in the existing MCB DB complete with connections, testing and commissioning atc. as required 63 amperes Cat. A complete in all respects.

Supply & erection of 6 Amps, to 32 amps, rating, 10 KA breaking capacity, 240 volts,“ C” curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required single pole Cat.- A including carriage of materials upto all leads and lifts

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels inter-connections, phosphatizes and powder painted, including earthing etc. as required single door -12 way including carriage of materials upto all leads and lifts complete in all respects.

Providing, installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (upto 30cm) with 16/0.20mm twin twisted flexible, cotton braided,copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: ceiling fan 1200mm sweep, Catrgory- A including carriage of materials upto all leads and lifts complete in all respects.

Providing & fixing LED tube 20 watt Philips/ Havells make with holder and all necessary fitting as required including carriage of materials upto all leads and lifts complete in all respects.

Providing & fixing LED lamp/ bulb 18 watt philips/ Havells make including all necessary fitting as required including carriage of materials upto all leads and lifts complete in all respects.

Ram Raj (BID ID -599861)

Sh. Lekh Raj Sharma (BID ID -599875)