Setting up of Quick watering Arrangement system as per CAMTECH design at RJPB station .

1-Setting up of Quick watering Arrangement system as per CAMTECH

Supply, installation and commissioning of MS container to be delivered to site with 1 complete pump room facility prepackaged steel enclose ready to install at site package pump house. It is to accommodate the three no's pump, electrical control panels and allied fittings with forced air circulating by exhaust fans & electrical fittings. Size of container required is 8x3.5x3 mtrs

RCC foundation and PCC platform for pre-fabricated pump house as per above referred Dimension.

Supply, installation and commissioning of GI/MS Pipe line size 300 mm from over Head tank to container including Fabrication and flange joint as per site requirement, bolts nut including contractor labour & painting.

Supply and commissioning of Sluice valve for pipe of size 300 mm along with fitting job. 1106798.7

Supply, installation and commissioning of Pump Sets of 60 HP, 1 set= 3 Nos of 60 HP 5 Pump wih Motor, each Pump of 60 HP with flow rate of minimum 320 m3/hr and discharge head of minimum 35m, each Pump along with Electric Motor of 3 phase induction type, 50 Hz Frequency, Motor Insulation class H & efficiency of IE3 or higher, three pumps integrated with variable frequency variable speed with constant discharge(VVFD) & integrated with SCADA, Motor & Pump should be of standard manufacturer such as M/s Kirloskar or M/s Crompton Greaves

Common skid Mounting for pumps sets

Basket type in line strainer for pumps sets

Supply, installation and commissioning of GI/MS Distribution Inlet Header of Size 500 mm Dia, length 6 meters at suction end (suction manifold) having one inlet of 300 mm and three outlets of 200 mm dia to connect pump sets, with fittings, including flange packing and nut bolts.

Supply, installation and commissioning of GI/MS Delivery Header of Size 500 mm Dia, 9 length 6 meters at delivery end of pump sets (delivery manifold) having three inlet of 200 mm and one outlet of 400 mm dia to connect feeding line, with fittings, including flange packing and nut bolts

Supply and commissioning of Butter Fly valve 200 mm

Supply and commissioning of Non return valve 200 mm

Supply, installation and commissioning of Flow meter 200 MB (Main Bore) with fittings 200 mm

Supply, installation and commissioning of Electrically Operated valve of 200 MB (Main Bore) with fittings 200 mm

1.5 Sq mm 6 core copper cable for control of Electric valve

1.5 Sq mm 6 core copper cable for control of Flow meter

Supply, installation and commissioning of 400 mm Dia GI pipeline from delivery header to hydrant pipe line with necessary flanged arrangement, bolts nut including contractor labor & painting and cost of earthwork, track crossing etc.

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the 17 excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. Pipes, cables etc, exceeding 80 mm dia. but not exceeding 300 mm dia.

Hydro Pneumatic Tank with fittings, 500 ltrs

Cable for Pumps to panel 16 sq. mm copper 3.5 core

Power cable of 95 sq. mm 3.5 core Aluminum along with lugs from D.G Panel to LT change over and to main control panel

Fabrication items like spool/tee/distance pieces etc as per site condition

Supply & fixing of G.I. pipe of 200 mm diameter for hydrant pipeline on rail pole & Fabrication of pipes. The pipes should be fixed with bellow expansion joints to compensate for Shrinkage & Expansion due to weather conditions

Supply & commissioning of of nipple with reducer 50 mm to 28 mm

Making Hole in GI Hydrant pipe line (200 mm) at every 2 meter and fixing the MS Coupling 32 mm dia with welding.

Supply of MS bends 90-degree 200 mm

Providing of D.I. M.S Flanged 200 mm B class

Supply and fixing of 50 mm Air release valves along with fittings to be installed in hydrant pipeline

Fixing of rail pole including work of earth work in excavation, rail cutting, placement of rail and concreting by C.C. 1:2:4

Supply and fixing of G.I./ M.S Plate 300x150x8 mm over the Rail Pole along with clamp 2 Nos and nuts duly making holes on both the end.

Supply and bending work to required shape M.S./G.I Pipe of 50 mm dia B class of 1.5 mtrs length with fixing of Mounting Plate, Clamp, Patti and jet nipple in Both End of Pipe

Supply and fixing of Galvanized M.S steel nipples of 50 mm dia, 75 mm long both ends threadred

Supply and fixing of Galvanized M.S steel nipples of 50 mm Jet nipple length 100 mm. long "B" class both ends threading and end Jet threading.

Supply, installation and commissioning of hydrant valve (SS Ball Valve) of 50 mm

Supply and fixing of TPU Water filling hose pipe as per specification ID 31.5 mm, thickness 2.5 mm and 2 meter length of each pipe

Supply and commissioning of hose clip for clamping and suspension arrangement

Supply, installation & commissioning of pressure transducer with pressure gauge to be installed on end of hydrant pipe line.

Design , Manufacture, supply, erection, testing & commissioning of free standing floor mounted, PLC based control panel suitable for 3 Nos. Pumps (minimum 45KW) panel made up of 14SWG CRCA (Cold Rolled Carbon Annealed) sheet after seven tank process and painting with EPOXY powder coating suitable for 3 Phase, 4 wire 415 Volts, AC supply system for comprising with: (i) Incoming 400 A with CTR 400/5 A 4 P, 35 KA B/C, Microprocessor based Adjustable MCCB = 01 No. (ii) Outgoing 125 A with CTR 125/5 A4 P 35 KA B/C, Microprocessor based Adjustable MCCB= 03 No. (iii) Outgoing 32 A 4 P 10 KA B/C, B type MCB= 02 No. (iv) Heavy duty Variable Frequency Drive 37 (VFD) suitable for minimum 45 KW Pump=3 Nos. (v) 15KVAR Heavy Duty Capacitor=3 No. (vi) Set /Individual Electronic Motor Protection Relay for provision of adequate protection against single phasing, under voltage, overvoltage, earth leakage, overload, dry run protection etc.=3 set (vii) Multifunction Meters for measuring (Parameters: V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events (High-Low), Neutral Current, K Factor) along with suitable ratios CTs(Current transformer) = each incoming & outgoing =4 set The panel shall be complete with 400A Copper Bus Bars for Phases and 200A for Neutral as per drawing approved by Railways. The panel shall have LED indication light for each incoming & Outgoing shall be available for phase indication, voltage, current, ON/OFF

SITC of Smart Control to Operate system (Pumps and valves through mobile). Communication a via GSM Network including SMPS power supply This may be installed in MCC Panel

Suction Pressure Transducer and Pressure Gauges With Fittings

Delivery Pressure Transducer With Pressure Gauge With Fittings 2271897.0

Diesel Generator set silent 250 kVA

Civil work of making a PCC floor as per Foundation Drawing of DG Set

1 KVA Industrial UPS with one hour Battery backup with cables.

Supply, erection and connecting of Maintenance free earth by 17.2 mm dia low carbon steel rod coated with 205 microns thick copper 3 mtrs long with clamps and carbon-based 44 enhancing compound of LORESCO BACKFILL material not less than 40 kgs for each. Exothermic welding and earth connection by SWG GI wire of length upto 6 mtrs. for connecting the earth to equipment generally confirming to RDSO's specification No. RDSO/PE/SPEC/0109/Rev. O' - 2008. The earth equivalent to MCML/JEF Techno solution Pvt. Ltd.

Supply and commissioning of SCADA & COMMUNICATION, DATA ANALYZER with LED MONITOR of 32" or Higher with i7 PC with keyboard, mouse and printer for report generation including UPS