Attending brk dwn calls FPB at Asman Mahal

Amount

Supplying, Installing, Testing and commissioning of Out door type Feeder pillar box made of 16SWG MS sheet, double door type including cutting welding painting with red oxide and powder coating with approved colour paint, the panel should have rain canopy and extended shade to avoid rain water splash inside the panel, providing rubber beading to make it water and dust proof, cable chamber for cable entry, locking arrangement etc as required. Incommer: 250A, 4P, 415 Volts 50Hz operated MCCB, rupturing capacity of 36KA, thermal release range of 200-250A, spreader terminals - Qty 1 No M/s L&T DU250 or SS make Outgoing: 63A, 3P, 415 Volts 50Hz operated MCCB, rupturing capacity of 30KA, thermal release range of 50-63 A, spreader terminals - Qty 7No M/s L&T DU100H or SS make Busbar: 1Set of 250 Amps, 4pole Auminium Bus-Bar with insulators, nut, bolts etc., as required

Providing and fixing of MS Angle Iron structure of suitable size including cutting, welding, painting with black colour paint, providing suitable size legs including grouting the same in the soil with CC mixture, making good the damages done etc., as required.

Dismantling of old Feeder pillar box including removing all the angle iron structure, removing incomming and outgoing cables, keeping the removed material to the location specified by the site inchareg within the premisis etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs from 3.5x25sqmm to 3.5x120sqmm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and fixing of Fuse Box made of 16 SWG MS sheet suitable for outdoor use including cutting, welding, painting and powder coating etc, the box shall accommodate existing 6Nos of 200A kit kat fuses including neutral link etc., as required

Supplying and fixing of 3no - 200A capacity kit kat fuse along with neutral link, top and base including fixing the same in the existing MS box providing fuse wire, interconnections with the existing cables, testing etc as required.

Supplying and laying of 3 x 2.5 sqmm of Flat copper cable suitable for operation on 415V, 50Hz, AC supply including interconnections, testing etc., as required

Shifting of 3ph submersible motor starter from one location to another location in the building premisis including removing, refixing, interconnections, testing etc., as required.

SHAKTI POWER LINES (BID ID -766856)