REPAIR TO PLINTH PROTECTION DRAIN PATH CULVERT AND HARD STANDING FENCING RCC JALI AND MISC WORKS OTM ACCN AND REPAIR MAINTENANCE TO FLOOR TILING PLASTERING PLUMBING SUNKON PORTON WATER PROOFING TREATMENT TANK CLEANING (9114/E8)

Amount

Note :- (i) All items in BOQ are for "Materials and labour /Supply and fix" and to be executed in "Repairs" unless otherwise specifically mentioned as "Supply only" or "Fixing only" in BOQ. (ii) Makes of material will be approved by GE in writing before commencement of work.

Demolition of cement concrete(unreinforced) in ground floors and pavings below or above ground level not exc 15 cm thickness and removing the rubbish outside MD Land, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation filling or mass concrete in sub base etc., complete all as specified and as directed.

M&L for PCC 1:3:6 Type C-1, (using 20mm graded crushed stone aggregate) as in plinth courses, string courses, lacing courses, parapets etc , copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 type B2, (using 40mm graded crushed stone aggregate) of as in hard standing/flooring laid in alternate panel including use and waste of formwork, complete all as specified and as directed.

Dismantling posts or struts (Wood,steel or RCC) any section embedded in concrete,including taking out embedded portion and making good disturbed ground, complete all as directed.

Dismantling of fencing wire mesh of any type, complete all as directed.

Dismantling of wrought iron or mild steel work of any description, complete all as directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc., complete all as directed.

S&F Structural Steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS-1161, 1979 grade ST-240, complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. not exc 10 kg each brackets, conforming to Fe.290 Gde E-165, complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/ loose soil each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete and as in fencing post, complete all as specified and as directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F for mild steel framed work such as grills,gratings, etc., with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290 Gde-E-165, complete all as specified and as directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed. Note : Each line wire shall be measured

"Fixing only" in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed. Note : Each line wire shall be measured

"Supply only" Chain link MS galvanised fencing any size or type (The max. size of mesh does not exc 100mm x 100mm and dia of wire not exc 3.15mm), complete all as specified and as directed.

"Fixing only" Chain link fencing including line wires,any mesh, size and type to any standards,rails straining bolts, etc. including provision of binding wire, complete all as specified and as directed.

S&F for welded steel wire fabric (Weight not exc 4kg per square metre)fixed to wood or steel members, complete all as specified and as directed.

S&F for mild steel round bars 10 mm dia and over, cut to length bent to shape required including crancking bending, spirally for hopping for columns etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in support of chain link fencing confirming to Gde-I IS-432 (Part-I), complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S&F rolled mild steel framework as in doors or gates of angle, MS tubular section or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging;also fastening and fixing complete to confirming Fe-410W (Gde E-250) quality 'A', complete all as specified and as directed.

M&L for welding Cast iron designer pieces like spikes, spiral patterns & moulding pieces etc., with intricate designs to the steel gate frame work, complete all as specified and as directed.

S&F for Steel rolling shutters of 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete push pull or manual type, complete all as specified and as directed.

S&F for Steel rolling shutters of 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated with complete motorised operation, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for keyed pointing in CM 1:3 over squared rubble regular coursed masonry, complete all as specified and as directed.

M&L for two coats of cement base paint on new plastered/pointed surfaces of walls including preparation of new surfaces over a coat of primer, complete all as specified and as directed.

Taking down door or chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each and removing from site, complete all as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm each but not exceeding 4 sqm and removing from site, complete all as directed.

M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 mm thick bent to shape incl two coats of synthetic enamel paint on int surfaces and two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc, complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete precast concrete block walling, complete all as specified and as directed.

M&L for providing precast cement concrete block masonary1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

M&L for rendering10mm thick on block masonary or concrete surfaces in CM 1:4 in mixed with water proofing compound, complete finished surfaces even and smooth without using extra cement, complete all as specified and as directed.

M&L for square rubble stone walling, jodhpur type, brought upto courses, well bonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

-Ditto- all as per Item No.37 above but except stone, complete all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses, complete all as specified and as directed.

M&L for preparing new plasted wall surfaces and applying three coats of white wash, complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, complete all as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of a colour having tensile strength of 550Mpa as in roof covering, chajjas fixed with self tapping screws, complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided, complete all as directed.

M&L for providing PCC louvres and jallies, 35mm thick (measured solid) 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) set in CM1:4, including all mouldings but excluding frame, complete all as specified and as directed.

M&L for providing PCC 1:3:6 type C-1, (using 20 mm graded crushed stone aggregate) in posts, boundry pillars including chamfers, weatherings, throating etc set in CM 1:4, complete all as specified and as directed.

S&F factory made coloured interlocking paver block of 60mm thick Glossy and rubberised finish of any colour shape and size M-35 grade, with 6mm top layers of ante abrasive rubberised material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

M&L for providing PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) in RCC lamps, decorative pattern to be fiited on Pillars including chamfers, weatherings, throating etc set in CM 1:4, complete all as specified and as directed.

M&L for 40mm thick cement concrete as in flooring 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finished even and smooth without using extra cement, complete all as specified and as directed.

Taking down cement plaster of any description on brick wall or stone masonary or concrete or RCC surfaces, dado surfaces etc., complete including racking out joints, hacking for key scrubbing down with water, complete all as directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on stone wall surface, complete all as specified and as directed.

M&L Rendering 10 mm thick CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc., all as directed & finished even & smooth, complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces including finishing the surface fair & smooth and applying two coats of cement base paint over a coat of white wash, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of ceilling and applying three coats of white wash, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying a coats of plaster of paris putty of 1mm thickness with fair finished and even surface and applying two coats of oil bound distemper complete (including applying sand paper to finished the surface), complete all as specified and as directed.

M&L preperartion of old plastered surfaces of wall and applying one coat of white wash, complete all as specified and as directed.

M&L Preparing of old plaster surfaces and applying one coat of oil bound distemper on wall, complete all as specified and as directed.

Preparation of old surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying two coat of wall care putty to finished the surface and applying two coat of oil bound distemper, complete all as specified and as directed by engr-in-charge.

Dismantling of Floor hearth or wall tiles including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as directed.

M&L non skid coloured ceramic tiles (premium quality) 300 x 300 x 6 mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match in and including 15mm thick cement mortar screed in CM 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L glazed coloured ceramic tiles (premium quality) 300 x 200 x 7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering making surface rough to recieve tiling etc., complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L glazed coloured ceramic tiles (premium quality) 350 x450 x 7 mm /350x250x7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering making surface rough to recieve tiling etc., complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for joint free non skid colour ceramic tiles (premium quality) of size joint free area exc 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement mortar screed in CM 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for colour ceramic tiles (premium quality) of size joint free area exc 0.11 sqm but nexc 0.18 sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for non-skid coloured ceremic tiles (premium quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE

-Ditto- All as per Item No. 66.00 above but skirting including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L light shade Vitrified Ceramic tiles (premium quality) 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

- Ditto- All as per item No. 68 above but skirting includig 10 mm thick rendering in CM 1:4, complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick as in floor over 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar, complete all as specified and as directed.

M&L for 18- 20 mm thick Kota stone slabs as in skirting, risers of steps & other vertical surfaces etc including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed.

M&L for 15 to 20mm thick machine cut Udaipur green marble (approved by users of any type work table rubbed and polished) as in cooking platform steps, jambs etc., including laid over 15mm thick cement screed bed in CM (1:4) Including cutting and rubbing grinding and granite polish (Mirror image finish), complete all as specified and as directed by Engr-in-Charge.

S&F machine made PCC curb stone blocks using Cement concrete 1:3:6 type C-2, (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge..

M&L for chequered cement concrete tiles (premium quality) 30x30x2.5cm thick, set and jointed in neat cement slurry in floor over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed by Engr-In-Charge.

Taking down existing old tar felt from RCC roof ,stone roof etc .care fully including cleaning the roof surface by wire/coir brush and removing all girts stone fungus and finally washing down with water to the entire satisfaction of Engineer-in-Charge and remove debries and rubbish out side MD land, complete all as directed.

M&L for carrying out water proofing treatment for roofs in the following stages, (i) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement. (ii) First Coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm (iv) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 2 mm having weight 2.25 Kg/sqm (v) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm (vi) M&L for 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) padding over roof laid in slope grooves 6 mm wide and 10 mm deep at 1.2 m interval in both ways or part thereof and filled with mastic bitumen (1:1) proportion, complete all as specified and as directed.

Demolition Concrete (un reinforced) of any description and in any position not otherwise specifically provided and removal of debris out of MD land, complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:3 using WPC @ 3% by weight of cement or as per manufacturers instruction, complete all as specified and as directed. Note : WPC shall be measured and paid seperately

"Supply only" water proofing compound (ISI Marked), complete all as specified and as directed.

M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) to use in subbase of floors of sunken portion laid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green, complete all as specified and as directed by the Engr-in-Charge.

M&L for applying one coat of cold emulsion bitumenous primer @ .25kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 1.5mm thick as specified above shall be laid by torch application method as per manufacturer instructions, complete all as specified and as directed.

M&L for PCC 1:5:10 lean cement concrete, type E-2 (using 40mm graded crushed stone aggregate) in mass concrete after carrying out satisfactorly testing of CI pipes/PVC pipes joints and slab walls by filling water for 72 hrs ,sunken portion of nahani trap/floor trap and pipe joints shall be embeded in PCC 1:3:6 type C-1, complete all as specified and as directed.

S&F 32 mm dia bore light grade galvenised steel water tubing provided 30cm beyond wall surface to drain out leakage if any. The mouth of GI pipe shall have Gravel to avoided chocking. The top of sunken portion of RCC slab to be finished such that its slope towards spout, complete all as specified and as directed.

Disconnectig existing tanks (exc 250 not exc 500 ltr), setting aside (or lovering if required ) for repairs, cleaning with bleaching powder/ Chemical, etc., and hoisting if required reconnecting and refixing in position . (cleaning repairing, etc. measured serately), complete all as specified and as directed.

Disconnectig existing tanks (exc 500 not exc 1000 ltr), setting aside (or lovering if required ) for repairs, cleaning with bleaching powder/ Chemical, etc., and hoisting if required reconnecting and refixing in position . (cleaning repairing, etc. measured serately), complete all as specified and as directed.

M&L PCC 1:2:4 (using 20mm graded crushed stone aggregate) for water tank plinth all as specified 50 mm thick, complete all as specified and as directed.

Taking down or up steel/ PVC tubing and connection including cleaning for refixing or removal to store, complete all as directed. (a) 25 mm dia

(b) 20 mm dia

(c) 15 mm dia

S&F of GI water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia

(b) 20 mm dia

(c) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc.S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repairs vitreous china wash down water closet with seat & cover as in rerpairs complete including fixing of flush pipe & flushing cistern, etc., complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

M&L Vitrous china wash basin as in repairs, white flat back size 550x400 mm including, waste fittings, waste pipe, MS brackets, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repair PVC low level flusing cistern 10 ltrs capacity with float valves white with inlet ball valve including float and includign PVC connection, complete all as specified and as directed.

S&F of PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.

S&F as in repairs fancy type chromium plated Bib cock with wall flange,fixed to 15mm dia bore pipe, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7037 or equivalent in Kohler/ Cera as approved by GE.

S&F as in repairs fancy type, chromium plated Stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia pipe, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7083K or equivalent in Kohler/ Cera as approved by GE.

S&F as in repairs of Angular stop cock, regular body, with adujstable wall flange with fancy type chromium plated with (concealed type) 15mm dia, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7053 or equivalent in Kohler/ Cera as approved by GE.

S&F Bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 15 mm 90gm/each, complete all as specified and as directed. Make : Prayag/ Commander/ Polytuff as approved by GE.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7011 or equivalent in Kohler/ Cera as approved by GE.

S&F in repairs of chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, complete all as specified and as directed. Make : Jaquar Cat No. OHS-1709 & SHA-477 or equivalent in Kohler/ Cera as approved by GE.

M&L Stainless steel 0.60 mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm as in repair, complete all as specified and as directed. Make : Jayna/ Blue Star/ Nirali as approved by GE.

S&F in repairs for Kitchen plate Rack made out of stainless steel 0.50 mm thick size 750x600x200 mm with partition, complete all as specified and as directed. Make : Jayna/ Blue star/ Nirali as approved by GE.

Demolition of existing RCC tank on roof and removing from site of capacity exceeding 300 litr but n. exc. 500 litr and making good the distrub surface by providing 100mm thic platform of required size for water storage tank with PCC 1:2:4 type B-1 using 20 mm graded stone aggregates over roof slab and finishing exposed cement concrete surface with 15mm thick plastering in cement mortar 1:4 and S&F white coloured rotational moulded polythene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I ) including tank lid cover complete with fixing arrangement, complete all as directed. Make : Sintex/ Rotex as approved by GE.

S&F 500 ltrs cap rotational moulded polythene water storage tanks (triple layer) white colour (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I including tank lid cover including taking down old PVC tank complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

S&F 1000 ltrs cap rotational moulded polythylene water storage tank (triple layer) white colour (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part -I including tank lid cover including taking down old PVC tank complete with fixing arrangement., complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

M&L Ball valves 20mm dia bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms, complete all as specified and as directed.

S&F only PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr, complete all as specified and as directed.

S&F 15 mm bore bib taps, two way chromium plated with wall flange, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7041 or equivalent in Kohler/ Cera as approved by GE.

S&F in repair health foucet with 8mm dia 1.2mtr long flexible steel tube with wall hook and chromium plated two way angle valve, complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat No. ALD-573 or equivalent in Kohler/ Cera as approved by GE.

S&F of CP mild steel grating 125 mm dia as in repairs, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.

S&F 100mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp, complete all as specified and as directed by Engr-in-charge

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm, complete all as specified and as directed.

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm, complete all as specified and as directed.

-Ditto- All as per item No. 125.00 above but fixed in wall, complete all as specified and as directed.

S&F 75mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed.

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia with oval access door, complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

S&F 75 mm PVC SWR junction (Tee) with acces door equal or unequal, complete all as specified and as directed.

S&F 110mm PVC SWR junction (Tee) with acces door equal or unequal, complete all as specified and as directed.

S&F 100mm dia CI bends including cutting of holes, complete all as specified and as directed.

S&F 100mm dia CI connector of length 30 cms including cutting of holes with lead joints, complete all as specified and as directed.

S&F CI single branch piece 100mm dia, complete all as specified and as directed.

S&F CI double branch piece 100mm dia, complete all as specified and as directed.

S&F 75mm dia CI bends including cutting of holes, complete all as specified and as directed.

S&F CI single branch piece 75mm dia, complete all as specified and as directed.

S&F CI double branch piece 75 mm dia, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

M&L for PCC solid block 10 cm thick 1:2:4 type B-1 set in cement mortar 1:6, complete all as specified and as directed.

M&L for welding in repair exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded not exc 6mm, complete all as specified and as directed.

M&L 75 mm thick PCC Type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base etc., complete all as specified and as directed.

Demolition of Precaste article and PCC block and removing of debris outside MD Land, complete all as directed.

S&F PCC 1:2:4 type B-1 post of size 60cm long 100mmx100mm, fixed in CM 1:4 with grooves for fixing of RCC jalli, complete all as specified and as directed.

Providing PCC louvres and jali, 35mm thick ( measured solid) incld all moulding, excluding frame, PCC 1:2:4 type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate ) set in CM 1:4, complete all as specified and as directed.

M&L PCC Type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) as in coping including form work, complete all as specified and as directed.

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

chhaba construction

M/S KAUTILYA GARG

Narendra General Suppliers

SURESH TRADERS