Line Shifting Madhopur Bandha to Mahesara bridge 33 kv, 11 KV and LT line Etc.

Amount

Shifting of Existing 33 KV, 11 KV, LT line and distribution Transformer for widening of Madhopur Bandha Road to Mahesara bridge (Via Basiyadih Temple etc) Gorakhpur. Under the head of Deposit Scheme Year 2023-24. Part A (Materials Provided by contractor)

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300mm² St. Through

11 KV ‘XLPE’ C/J Kit 3x70mm² Outdoor

11 KV ‘XLPE’ C/J Kit 3x70mm² St. Through

11 KV ‘XLPE’ C/J Kit 3x185mm² Outdoor

11 KV ‘XLPE’ C/J Kit 3x185mm² St. Through

Number Plate with Clamp

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

Earthing Complete (MS Earthing Rod 20x2500 mm+GI wire 5mm 2 Kg per)

LT AB Cable clamp

I Hook

I clamp

Suspension clamp

Neutral PRC

Al. Paint

Red oxide Paint

11 KV cross arm clamp for ST Pole

11 KV F-bracket with nut bolt for ST Pole with nut bolt by 50x6 mm MS flat Iron make

11 KV Cross Bracing Angle

11 KV Top channel/Bracing angle clamp with nut bolt for ST Pole with nut bolt by 50x6 mm MS flat Iron make

11 KV E bracket with nut bolt for ST Pole with nut bolt by 50x6 mm MS flat Iron make

PG clamp for weasel/Dog

11 KV Stay set (Stay Rod 16x1800 mm, Stay wire 7/10 SWG -5Kg/Stay, Stay clamp)

33 KV cross arm clamp for ST Pole

33 KV E bracket with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

33 KV. Top channel clamp for ST Pole with nut bolt by 50x8 mm MS flat Iron make.

33 KV Stay set (Stay Rod 20x1800 mm, Stay wire 7/8 SWG -10Kg/Stay, Stay clamp)

LT lug different size

33 KV M.S. Angle Iron 65x65x6mm bracing with clamp for ST Pole with nut bolt by 50x8 mm MS flat Iron make (01 No Bracing per 02 No clamp)

11 KV MS channel Dropper for fuse set(100x50x2028)

11 KV LT T-Off

11 KV holding clamp for fuse set/TPMO etc

11 KV MS channel T-Off(125x65x1300mm)

11 KV TPMO

LT Incoming Panel with Metering eqipment & fixing arrangement (LS)

Copper L- Piece 50x225x10mm (LS)

Copper L- Piece 62x225x12mm (LS)

Al Leg long barrel, off size (LS)

4 Core LT MCB with box (LS)

Copper Z clamp

Distribution Box(complete)

Al. lug 400 sqmm

11 KV Temporary line cable hanging Hooks & clamp

PART - B- WORK Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

ST Pole 9 m long

ST Pole 11 m long

ACSR weasel Conductor

ACSR Dog Conductor

3x300 mm² ‘XLPE’ cable 33 KV

3x70 mm² ‘XLPE’ cable 11 KV

3x185 mm² ‘XLPE’ cable 11 KV

2x10 mm² LT cable

4x16 mm² LT cable

3x120+1x95+1x16 mm² LT AB Cable

3.5x400 mm² LT Cable

1x400 mm² LT Cable

11/0.4 KV New 250 KVA T/F

LT Schakle Insulator

11 KV V type cross Arm

11 KV Polymer Pin Insulator

11 KV Top channel

11 KV Polymer Disc Insulator

11 KV Polymer Disc fitting

33 KV V type cross Arm

33 KV Polymer Pin Insulator

33 KV Polymer Disc Insulator

33 KV Polymer Disc fitting

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

Erection of Single pole structure on 9 mtr ST Pole for LT AB Cable including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (LT clamps with bolt and nut danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Single pole structure on 11 mtr ST Pole for 11 KV OH & LT AB Cable composite line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm, clamps with bolt and nut , LT AB cable clamp clamps with bolt and nut danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Single pole structure on 11mtr ST Pole for 11 KV O/H line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for Composite line (11 KV overhead line + LT AB Cable Hanging) including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, LT AB Cable clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for 11 KV overhead line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for 11 KV one side overhead and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Single pole structure on 11mtr ST Pole for 33 KV O/H line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for Double circuit line( 'V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for 33 KV overhead line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for Double circuit line (M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Four pole structure on 11 mtr ST Pole for 33 KV overhead line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for Double circuit line (M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Installation of distribution Box complete

Dismantling, shifting and Relaying (Hanging) of Existing LT ABC Cable on new erected Pole complete.

Labour charges for Hanging of LT AB Cable on new erected pole with LT AB Cable clamp complete.

Laying, spreading, lifting and final sagging of 11 KV/33 KV 3 phases of ACSRweasel/ Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03/06 Nos. conductor in parallel (Single Circuit/Double Circuit).

Laying, spreading, lifting and final sagging of 3 phases 4 wire of ACSRweasel/ Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of Clamp as per requirement in 05 Nos. conductor in parallel.

Laying, spreading, lifting and final sagging of 1 wire of ACSR weasel Conductor in accordance parallel with AB Cable as a neutral wire. fixing of Clamp as per requirement.

Laying of 11 KV ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site require.

Extra cost for drilling horizontal hole 2 Mtr below the road & inserting 6” dia. HDPE Pipe PN-6 as per RESSPO for passing of 33 KV XLPE cable 3x300 mm² for Road /Pulliya Crossing at different places in the path of Laying of cable. (Complete work with Materials provided by contractor)

Rising of 33 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Rising of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Cable jointing charges of 33 KV XLPE Cable Outdoor/ Straight Through

Cable jointing charges of 11 KV XLPE Cable Outdoor/Straight through.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Disconnection and Reconnection of Existing LT cable connection in the path of Shifting of line as per follwoing details.

L.T. and Domestic Consumer connection cable.

Commercial and Power Consumer Connection cable.

Cost of Plumbing work (for Proper water supply of public and Nagar Nigam area) in the path of 33/11 KV/ LT cable laying in different places in different sizes as per site requirement.

installation of New 250 kVA T/F, erection of D/P, laying and connection of LT cable with transformer, installation of iron jaali and Earthing of each Transformer at two place).

Shifting, loading, Carriage and re-installation of Existing 400/250 kVA T/F From Existing place to Shifting Place, erection of D/P, laying and connection of LT cable with transformer, installation of iron jaali and Earthing of each Transformer at two place).

Dismentling charges of existing Single Pole 9 mtr. ST Pole.

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Double Pole 11mtr. ST Pole.

Dismentling charges of existing Single pole on PCC Pole 8.5 mtr.

Dismentling charges of existing Single Pole 11 mtr. Rail Pole.

Dismentling charges of existing Four Pole 11mtr. ST Pole.

Dismentaling of old ACSR Weasel/Dog conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old and damaged 33/11 KV/LT Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Temporary line work

Erection of Single pole structure on 11mtr ST Pole including all works of evocation of pit, pole erection, back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm 100 x 50 x 6 mm, Hooks & clamps with bolt and nut, stay set etc. complete).

Labour charges for Hanging of 11 KV 3x185/70 mm² XLPE Cable on new erected pole with hooks and clamp complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor/Straight through.

Dismentling of existing temporary all HT/LT Lines with all material & fitting and Shifting, Loading Carriage & Unloading of old- and used-Line materials from Work site Store to store centre Gorakhpur at the end of final shifting.

INDIA SUPPY CORPORATION