Carrying out various electric works on Semi Turn Key Basis for System Strengthening in Business Plan Scheme in the area of EE, EUDD II, Mathura under the jurisdiction of SE, EUDC, Mathura

Cartage of following material from Store centre, Mathura to work site.

ST Pole (11 mtr. Long) (Bottom Portion Galvanized)

ST Pole Pole (13 mtr. Long) (Bottom Portion Galvanized)

PCC Pole (8.5 mtr. Long)

250 KVA T/F.

100 KVA T/F.

LT PVC cable 1x400 sq.mm.

LT XLPE cable of size 3.5x240 Sq. mm.

Cable A.L.3.5X150 sqmm. PVC

33 KV XLPE Cable 3x300 Sq.mm.

11 KV XLPE Cable 3x185 Sq.mm.

11 KV XLPE Cable 3x300 Sq.mm.

Cable Jointing Kit 33 KV 3x300 Sq.mm. O/D

Cable Jointing Kit 11 KV 3x300 Sq.mm. I/D

Cable Jointing Kit 11 KV 3x300 Sq.mm. O/D

Cable Jointing Kit 11 KV 3x185 Sq.mm. O/D

Stay set complete with concreting

armoured cable 2x10

armoured cable 4x10

11KV O/G 200/100/5A VCB

11 KV TPMO

33KV ILNE ISOLATOR 800A,

33 KV POST INSULATOR

11 KV FUSE SET

33 KV FUSE SET

11KV VCB I/C CTR 600/300/5A,350 MVA

33 KV VCB 800 A, 750 MVA

33/11 KV 10 MVA Power T/F

ACSR Weasel conductor,

ACSR insl. Weasel conductor for jumpering

ACSR Dog conductor,

Cartage of above material like various size 33 KV, 11 kv cable, dog/weasel conductor, Jointing kit, vaccume interrupter, distribution transformers, ST/PCC Pole, insulator, control panel, pin insulator, bus isolator, brass glands, channel, clamps etc. from Store Center, Mathura to work site and dismentled material from site to dvvnl store.

Digging of pit & erection of new single support ST Pole (13/11 mtr. long) including grouting of pole and fixing of all clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Double Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Tri Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Earthing of ST/PCC pole/Body earthing of T/F. by M.S earth rod.

Painting of pole With Red Oxide & Alumunium paint

Digging of pit & erection of Stay rod with, stay,Stay Wire, grouting cement sand and brick ballast including Nuzzling, binding Complete.

Plinth & Foundation of 33 KV 800A 750 MVCA VCB

Pipe in Pipe Gel Earthing for 33 KV VCB & 11 KV Incoming/Ooutgoing VCB with Earth strip as per technical specification

Pipe in Pipe Gel Earthing for 33 KV Line isolator as per technical specification

Laying of 33/11KV/LT line on Dog conductor on erected poles.

Providing & Fixing/Installation of 33/0.4 KV, 250 KVA S/S

Making Structure for 33/0.4 KV 250 KVA S/S. along with construction of plinth

Laying of 11KV/LT line on weasel conductor on erected poles.

Laying of 2x10 armoured cable

Laying of 4x10 armoured cable

providind & fixin of aluminium thible 10 sqmm.

Fixing/Installation of 33 KV Line Isolator

Providing of Structure for 33 KV Line Isolator

providind & fixin of PVC PIPE

providind & fixin of aluminium thible 16 sqmm.

Providing & Fixing of PVC Pipe 3" of diameter

Laying of LT XLPE cable 3.5/240 sq.mm.

LT PVC cable 1x400 sq.mm.

Filling & fixing of Cable Jointing Kit 33 KV 3x300 Sq.mm. Outdoor type

Filling & fixing of Cable Jointing Kit 11 KV 3x300 Sq.mm. Indoor type

Filling & fixing of Cable Jointing Kit 11 KV 3x300 Sq.mm. Outdoor type

Filling & fixing of Cable Jointing Kit 11 KV 3x185 Sq.mm. Outdoor type

Guarding of 11KV line.

Fixing of stay set complete with concreting

Providing & fixing of Stone Pad

Providing & fixing of Danger Board With Clamp,

Providing & fixing of G.I. Barbed Wire,

Providing & Fixing of 33 KV V type Steel Cross Arm

Providing & Fixing of 11 KV V type Steel Cross Arm

Providing & Fixing of 33 KV V type Steel Holding Cross Arm Clamp

Providing & Fixing of F Bracket with top bridal

Providing & Fixing of E Bracket for 33 KV

Fixing of 11 KV V type Steel Holding Cross Arm Clamp

Providing & fixing of 11 KV F Bracket

Providing & fixing of 33 KV F Bracket

Providing & fixing of MS Nut, Bolt and Washer's

Providing & fixing of Guarding Angle for 11 KV

Providing & fixing of I Bolt for Guarding

Providing & fixing of Aluminium Biding Wire for Guarding

Providing & fixing of G.I. Wire

Providing & fixing of G.I. Pipe 4"/6" dia

Providing & fixing of Clamp For G.I. Pipe

Providing & fixing of G.I. Pipe for Riser

Providing & fixing of P.P. clamps with nut & bolts

Providing & fixing of M.S. Angle 65x65x6x4300 mm bracing set with 4 Nos. clampsP.P. clamps with nut & bolts

Providing & fixing of 33 KV/ 11 KV E Bracket

Fixing of 33 KV Pin Insulator with pin

Fixing of 11 KV Pin Insulator with pin & nut

Jumpering work of ACSR Weasel coductor

Fixing of Disc Insulator 45 KN & 70 KN (T&C/B&S)

Providing & fixing of Aluminium Lug 3.5X150

Providing & fixing of Aluminium Lug 3.5X400

Providing & Connecting Earthing Strip

Laying of 33/11 KV XLPE cable in Trench/Double Pole structure & air and filling of cable jointing kit with proper dressing.

Installation of D.O. Fuse Set of 11 KV

Installation of D.O. Fuse Set of 33 KV

Installation of TPMO of 11 KV

Concreting of Pole (STP 13 Mtr./11 Mtr & 8.5 Mtr. PCC)

Water level Earthing of 10 MVA T/F. as per technical specification

Opening of Jumper & Connection & Earthing of Body & Neutral of existing 8 MVA T/F. and Dismantling of Neutral Earthing frame, cable frame and Safe shifting of 8 MVA T/F. from Plinth to yard corner.

Re-fixing of 33 KV Cable, Jumper & Earthing (Neutral & Body Earthing connected by electric welding)., Erection of Neutral Earthing frame, Cable frame

The Construction of new Plinth of Size 5’X5’X4’ above ground level and one ft. below the ground level for 250 KVA transformer

Installation of following transformer on Plinth/Double pole with all connecting accessories jumering etc. including carriage of transformers from store centre, Mathura to work site.

250 KVA Transformer on Plinth

100 KVA Transformer on Double Pole structure

Complete chemical earthingof 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

Construction of M.S angle fencing of size (3M x3M x2M) around the plinth of 400/250 KVA transformer and gap between the M.S angle should not be more than 65mm.

Testing, commisioning & Enersization of new 10 MVA Power T/F.and 11 KV Feeders and connect it to existing system.

Dismantling of single support ST Pole/Double pole(13/11/9mtr.) PCC pole with complete accessories, OLD & Damage TPMO/old isolator, 8 MVA Power T/f. old & damaged Incoming/Outgoing VCB along with associated infra and dismatled HT/LT Line, scrap etc from work site to Store Center, Mathura with safe loading & unloading.

Proper Road Restoration Kaccha/Pakka (If required) Rates shall be acceptable, if not given above for the same work.

SAMRA CONSTRUCTIONS