General Repair with replacement of damaged parts of Dozer BD-50 13462 BEML Make

Periodic Servicing of Dozer BD-50 13462 BEML by way of Providing and fitting of Hydraulic oil for after repairs and servicing -120 Litres. Providing and filling of M-oil 20 litre for track rollers, steering and sprocket assembly – 40 Ltr. P/fitting of M-oil filter complete. Hydraulic filter complete set, Primary and secondary air filter complete set. Coolant – 20 Lites etc Complete job includes the cost of material, labour charges etc. Repair of Hydraulic Blade Control System Dozer BD-50 13462 BEML Labour charges/cost of material for dismantling of blade lift hydraulic cylinders and control hoses, providing and fitting of hydraulic seal kit, piston seals, rod seals, wiper seals, O-rings, hydraulic hoses with end fittings, topping up hydraulic oil, bleeding of hydraulic circuit, testing of lifting and tilting operations after repairs complete including cost of material and labour charges.

Repair of Cooling and Lubrication System Dozer BD-50 13462 BEML repair to radiator of and its tubes by way of dismantling of its shield plates inlet and exhaust manifolds muffler assembling etc. dismantling of radiator Providing and fitting of radiator pressure cap, upper and lower radiator hoses, hose clamps, thermostat gasket, coolant, flushing of complete cooling system, replacement of damaged lubricating oil pipes, tightening of all hose connections, checking for leakages and testing under working conditions complete including cost of material and labour charges

Labour charges/cost of material for dismantling of clutch system of Dozer BD-50 13462 BEML and removing of all damaged /worn out parts and providing and fitting of new parts i.e. disc main clutch (11OMC-02019) – 01 nos., Bearing main clutch (06030-06012) – 01 Nos., Rying snap (CFL01-16020) -01 Nos., Support main clutch (110MC-11407) – 02 nos., Pin cotter (CFP01-0422) -03 nos., Ring main clutch (110MC-51413) -01 Nos., and then assembling of complete unit.

P/F of new parts for Dozer BD-50 13462 BEML in place of defective parts/worn out parts i.e Instrument Panel (10.52.00.020144)-1no, Hour Meter 0710.02.0000)-1no., Oil Pressure Gauge -1 no., Oil Temp Gauge -1no., Fuel Pressure Gauge-1no., Ammeter -1no. Key Switch-1no., Light Switch-1no. etc. including p/f of pressure pipes – 02 nos., fitted to the m/c includes cost of material & labour charges .

P/F of fuel pipe, V belt (178622) – 02 Nos., Belt V (3040448) – 01 No., Hose plain (67185) -04 Nos., Hose plain (63495) – 02 Nos., Clamp hose (43828B) – 04 Nos., Clamp hose (43828D) -08 Nos., Hose (505062) -01 No., Clamp hose (438284) -02 Nos.,

Repair of Track Frame and Track Tensioning System Dozer BD-50 13462 BEMLLabour charges/cost of material for dismantling of track adjuster assembly of Dozer BD-50 BEML, cleaning of complete track tensioning mechanism, providing and fitting of track adjuster seal kit, O-rings, grease nipple, charging of grease, adjustment of track sag as per OEM specifications, replacement of damaged fasteners, reassembly, testing and trial run complete including cost of material, consumables and labour charges.

Replacement of Electrical Starting Accessories Dozer BD-50 13462 BEML P/f battery terminals, battery cables, terminal clamps, insulation sleeves, cleaning of battery tray, checking charging circuit, testing alternator output, starter motor performance and complete electrical starting system after installation including cost of material and labour charges. Complete electrical repairs including self and alternator and replacement of old electrical wiring with new one. P/F of new oil pressure meter, Temp. meter , Ampere meter and starting switch .Complete job with the cost of material and labour charges and testing after repairs etc.