Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC | L1 | Accepted-AOC rates are justified | |
| 2 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Blank Documents uploaded | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Blank Documents uploaded |
Tender Value
₹14.6 L
EMD Value
₹29,228
Closing Date
12 Mar 2020, 11:00 amClosed
EE(ELECT)
FTR HQ GHTY
PROVIDING, INSTALLATION , TESTING AND COMMISSIONING OF 20 MTRS HIGH MAST WITH LED LIGHTS IN AOR OF BOP TALAI OF 62 BN BSF UNDER SHQ BSF COOCHBEHAR
2020_BSF_549381_1
16/Engg(elct)/SHQ CBR//19-20
Open Tender
Electrical Works
Item Rate
90 days
SHQ BSF COOCHBEHAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
DIG SHQ BSF COOCHBEHAR
₹29,228
1 May 2020
3 Mar 2020
13 Mar 2020
3 Mar 2020
12 Mar 2020
3 Mar 2020
3 Mar 2020 - 11 Mar 2020
Amount
Supplying of 20 Mtrs high raising lowering type Polygonal, in two sections High Mast towers, on the existing foundatins, as per technical specifications suitable for the following configuration of LED fittings, complete with portable power tool, double drum winch along with separate handle for manual operation, lantern carriage, 2 wire suspension system, power cable, lightning protective finial LED aviation light fitting, foundation bolts along with nuts, washers, anchor plate and templates, supply of LED type single dome aviation obstruction light with lamp etc. complete as required. Crompton Greaves Cat Part No. HM-20 A Octagonal Galvanized High Mast of height 20 meter or equivalent model in Bajaj / utkarsh (Supply of material at site BOP ).
Suitable for 12 luminaries in Symmetrical Orientation.
Technical data specifications
1) High Mast Structure:-
Height of mast (Mtrs)
Material of construction
Thickness of material. I. Top Section II. Middle Section III. Bottom Section
Cross Section of Mast (Number of sides)
Length of individual Section I. Top Section II. Middle Section III. Bottom Section
Base & Top Diameter I. Base Dia II. Top Dia
Type of joints
Length of overlap
Metal Protection treatment
Thickness of galvanisation
Size of Door opening at base of mast
Type of locking on door panel
Lighting protection finial
Aviation obstruction light
Size of base plate I. Diameter II. Thickness
2) Dynamic loading as pervailing at site
Maximum wind speed (IS 875 - 1987)
Number of foundation bolts
PCD of foundation Bolts
Diamter of foundation Bolts
Length of foundtion bolts
3) Lantern Garriage
Material of construction
Diameter of lantern garriage ring
Construction
Number of Joints
Load carryying capacity
4) Winch
Number of drums per winch
Gear ratio
Capacity
Method of operation
Lubication arrangement
Type of Lubricant
5) Stainless Steel wire rope
Grade
Diamter of SS Rope
Construction of SS Rope
Number of SS Ropes
Thimbles & terminals
Breaking load capacity
6) Trailing Cable
Material of construction
No of circuits per mast
7) Power tool
Model
Capacity (HP)
Number of speeds
Reversible / Non reversible
Input Supply
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.. All Kinds of soil.
Providing & laying in position cement concrete of 1:4:8 grade ( 1 Cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level.
Providing and laying in position 1:1.5:3 grade ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
Steel reinforcement for R.C.C work i/c straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations & footing, base of column etc for mass concrete
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
Providing and installation of integral LED Flood Light Luminaries 250 Watts (Warm White) heavy duty, outdoor type made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. system efficiency >110LPW including 10 KV SPD as per technical specifications so as to ensure achievement of desired illumination level as required. cat par No. LSFO- 250 - CDL / 60-M C.G make or equivalent model of Havells / Philips / C&S. ( For 20 Mtrs High Mast).
Installation, testing and commissioning of 20 Mtrs high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 Sq mm / Power cable as per industry standards,lugs, ITC of LED type double dome aviation obstruction light with lamp including connection testing etc as required including all labours.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing & fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I nut, bolt, spring, washer excavation and refilling etc. as required.
Providing & fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as reqd
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.i) 90 mm dia (OD-90 mm & ID-76 mm nominal)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Supply and laying of aluminium armoured LT underground XLPE insulated PVC sheathed tap/wire armoured cable conforming to IEC :-part-III and 650/1100 v grade as per IS 7098 (PART -1)1988 at site in the existing RCC/HUME/ METAL PIPE etc as required as reqd.3.5 C X 95 SQ MM (HAVELLS/POLYCAB/FINOLEX/HPL)
Supply and laying of aluminium armoured LT underground XLPE insulated PVC sheathed tap/wire armoured cable conforming to IEC :-part-III and 650/1100 v grade as per IS 7098 (PART -1)1988 at site in the existing masonry open duct as required 3.5 C X 95 SQ MM (HAVELLS/POLYCAB/FINOLEX/HPL)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .