ADDN / ALTN OF ALD WORK SHOP AT BLDG (P-26) BUILDING AT INS UTKROSH UNDER GE MINNIE BAY, SRI VIJAYA PURAM

Taking down cement plaster on brick or PCC block masonry wall in any description including hacking down, scrubbing down for key complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) using water proofing compound (WPC will be paid separatley) on brick masonry or stone block masonry or concrete surfaces complete all as specified and as directed.

M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth complete all as specified and as directed.

Supply only water proofing compound conforming to IS-2645-1975 all as specified.

Demolition of Pecast concrete articles and precast concrete block walling any description any position complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed.

-Ditto- all as per item no 7 here-in-before but n.exc 10cm thick and set in CM 1:4 (PCC block masonry half brick thick) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Double charged/ultracharged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed.

- Ditto - all as per item No 10 here-in-before but on dado / skirting over 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

-Ditto- all as per item 12 here-in-before but as in vertical surfaces/skirting over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured/printed tiles 450x350x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed.

S & F in repairs Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed .(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, glass & aluminium wire cloth as applicable will be measured and paid separately as supplied only).

S& F 5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

M& L for 12 mm thick Prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

Supply & fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. Note: stainless steel butt hinges and necessary S S screws incl in this item.

S&F for 125 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 etc., complete all as specified and as directed.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed etc., complete all as specified and as directed.

S&F for 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc., complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) of size 540x375x415mm coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 630x450mm including 32mm brass chromium plated waste fittings with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, including waste pipe and CP urinal spreader complete all as specified.

S&F in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and 32mm PVC bend complete all as specified and as directed.

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug in wall, complete all as specified and as directed.

S & F in repair Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type heavy duty, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F in repairs to Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repair chromium plated health faucet with 1000mm PVC pipe for 15 mm bore with fittings complete all as specified and directed.

S & F in repairs 32/40mm dia PVC flexible Waste Pipe, 750 mm long fixed to Wash Hand Basin complete all as specified and directed..

S&F in repairs brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed.

Taking up or down 15/20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25/32mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 20mm with proper clamping arrangements complete all as specified and as directed.

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 25mm with proper clamping arrangements complete all as specified and as directed.

S&F CPVC brass threaded elbow 20mm outer dia complete all as specified and as directed.

S&F CPVC brass threaded Tee for 25 x 20mm outer dia complete all as specified and as directed.

S&F CPVC Brass threaded adopter (FTA/MTA) of 20mm outer dia all as specified.

S&F CPVC Brass threaded adopter (FTA/MTA) of 25mm outer dia complete all as specified and as directed.

S&F Ball valves for 25 OD CPVC pipes complete all as specified and as directed.

M&L for cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc, and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repair 100 mm dia CP grating with/without hole incl joints with solvent cement complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends of any radius.

S&F 75 mm bore PVC (SWR) bends of any radius.

S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed. Note :- Cement concrete shall be measured and paid seperately.

M&L proparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion), Nerolac (beauty smooth), Shalimar Paints (No.1 Silk).

M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion).

M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion).

M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint (company depot tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion).

M&L for complete removal of old distempered surfaces and applying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk)

M & L for preparation of old plastered surfaces of ceiling and applying single coat of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk)

M & L for preparation of old plastered surfaces of wall and applying single coat of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk)

Dismantling , Plain or corrugated steel sheeting any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S & F in repairs Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and as directed.

S& F in repairs for tubular MS Pipes as in trusses / Rolled sections, cross beam , hip and jack rafters , vertical posts purlins where connected to common rafters fixed with angle cleats or connecting plates any similar work including welding, and all necessery works conforming to grade of steel Fe-410- (Gde- E-250) quality- B complete all as specified and directed. Note : Height of the bldg upto G+3 storey including necessary safety arrangements

M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of (grade of steel Fe-410- (Gde- E-250) quality- B) complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required :hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three waystraps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® all as specified and as directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation,etc.) any description, any size complete all as specified and as directed.

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

M & L for supply of approved earth from out side MD land and spreading in layers n exc. 25 cm thickness including watering complete all as specified and directed.

M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed.

M&L PCC 1:4:8 type D2 (40mm graded aggregate) 100mm thick for paving,sub base, path etc complete all as specified and as directed.

M&L PCC 1:2:4 type B 2 (40mm graded aggregate) 100mm thick for paving,sub base, path etc complete all as specified and as directed.

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces complete all as specified and as directed.

Material and Labour Point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, multistranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point/ 3 pin 5 Amps socket outlet independent point controlled by one, one way switches complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed.

All as per item No. 79.00 here-in-before but one 3 pin 5 amp switch socket out let independent.

All as per item No. 2.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with casing caping / PVC conduit complete 2.5 sqmm multistraded complete all as specified and as directed.

All as per item No. 2.00 here-in-before but using 2.5 Sqmm size stranded copper conductor cable for one 16 Amp switch 2.5 sqmm for socket outlet point on independent board complete PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

All as per item No 2 herein before but with 4 Sqmm single core multi standard copper conductor for one three pin socket 20 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly including taking down old u/s point wiring complete all as specified and as directed.

S&F switch piano flush type, single pole one way, 5 Amp complete all as specified and as directed. Make:- Panasonic/Anchor / Havells.

Supply & fix switch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type complete all as specified and as directed. Make:- Panasonic/Anchor / Havells.

Supply and fix Socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed. Make:- Panasonic/Anchor / Havells.

S & F for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings after taking down old U/S complete all as specified and as directed. Make:- Panasonic/Anchor / Havells.

S&F ceiling rose, PVC/Polycarbonate, 65 x 50 mm,three terminals complete all as specified and directed. Make:- Panasonic/Anchor / Havells.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length after taking down old U/S complete all as specified and as directed. Make:- Bajaj /Panasonic / Havells/ Crompton .

Supply and fixing LED lights fitting 4 feet,1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length taking down old U/S complete all as specified and as directed.complete all as specified and as directed. Make:- Bajaj /Panasonic / Havells/ Crompton .

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high.efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete..with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length taking down old U/S complete all as specified and as directed.complete all as specified and as directed. Make:- Bajaj /Panasonic / Havells/ Crompton .

Supply only of security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt, and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting all as specified and as directed.

Supply and fixing MCB SPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail,12 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed. Make:- Legrand/ L & T/ Hager/ Siemens/ ABB/ Schneider./ C&S Electric Ltd.

Supply and fixing MCB 6 to 32 Amps, SP, 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed. Make:- Legrand/ L & T/ Hager/ Siemens/ ABB/ Schneider.

Supply and fixing MCB 6 to 32 Amps, DP 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed. Make:- Legrand/ L & T/ Hager/ Siemens/ ABB/ Schneider./ C&S Electric Ltd.

Supply and fixing TP 63 Amps, 415 Volts , MCB 'B- Curve breaking capacity 10 KA complete all as specified and as directed. Make:- Legrand / L&T/ Hager/ Siemens/ ABB/ Schneider.

Taking down,Opening and refixing the ceiling fan upto 1400mm Sweep for inspection, removing bush / bearing, cleaning of bush / bearing, rewinding,repairs to shaft including lathe work and grinding as required complete including painting ,minor spare parts replacement such as split pin, rubber reel, nuts bolts and PVC canopy including reassembling and refixing of fan at its own position complete complete all as specified and as directed. Note: All Spare parts such as bush bearing and capacitor shall be measured including the items of schedule.

Supply & Fixing Exhaust fan AC single phase 240 V of size 450 mm sweep with louvre specially designed by kitchen in domestic ventilation.plastic body and blade, finish high quality engineering plastic heavy duty motor, protective bird guard complete all as specified and as directed. Make - Havells/USHA /CG/ORIENT or equivalent. Note-: Taking down old fan and depositing to MES store

Please Enable Macros to View BoQ information