Upgradation modernization of electrical panel and substation Phase I, Annexe Building

Amount

Cat (A) - Items to be supply and installation (M.V.PANELS)

Design, Supply, Installation, Testing & Commissioning of IP42 Cubical MV Panel in existing panel room as per Technical specification and in co-ordination with Engineer-in-charge. All MCCB should be of 3 Pole with Neutral link, Spreader Terminal, Phase barrier & Extended Rotary handle. a) 400 A MCCB 36 KA - 1 No. (As Incomer) b) 100 A MCCB 25 KA - 12 Nos. (Outgoing feeder)

Rerouting & Terminating In/Out cables in to new panel by taking shutdown in a shortest period. Relaying & End jointing of copper / aluminum conductor XLPE armoured cable by crimping method complete with supply of all joints materials like copper / aluminium lugs confirming to standard suitable for following cable size and connected to switchgear terminals with brass / cadmium plated nut bolts in approved manner, brass cable glands of suitable sizes, earthing connection etc., specified and required. a) 3.5 C x 185 sq.mm Al cable (2 Nos.) b) 3.5C x 95 sq.mm Al cable (10 Nos.)

Design, Supply, Installation, Testing & Commissioning of IP42 Cubical MV Panel in existing panel room as per Technical specification and in co-ordination with Engineer-in-charge. All MCCB should be of 3 Pole with Neutral link, Spreader Terminal, Phase barrier & Extended Rotary handle. a) 200 A MCCB 36 KA - 1 No. (As Incomer) b) 63 A MCCB 25 KA - 12 Nos. (Outgoing feeder)

Rerouting & Terminating In/Out cables in to new panel by taking shutdown in a shortest period. Relaying & End jointing of copper / aluminum conductor XLPE armoured cable by crimping method complete with supply of all joints materials like copper / aluminium lugs confirming to standard suitable for following cable size and connected to switchgear terminals with brass / cadmium plated nut bolts in approved manner, brass cable glands of suitable sizes, earthing connection etc., specified and required. a) 3.5 C x 185 - 300 sq.mm Al cable (1 Nos.) b) 3.5 C x 10 - 120 sq.mm Al cable (8 Nos.) c) 4C x 4 - 16 sq.mm Cu cable (8 Nos.)

Design, Supply, Installation, Testing & Commissioning of IP42 Cubical MV Panel in existing panel room as per Technical specification and in co-ordination with Engineer-in-charge. All MCCB should be of 3 Pole with Neutral link, Spreader Terminal, Phase barrier & Extended Rotary handle. a) 200 A MCCB 36 KA - 1 No. (As Incomer) b) 63 A MCCB 25 KA - 08 Nos. (Outgoing feeder)

Rerouting & Terminating In/Out cables in to new panel by taking shutdown in a shortest period. Relaying & End jointing of copper / aluminum conductor XLPE armoured cable by crimping method complete with supply of all joints materials like copper / aluminium lugs confirming to standard suitable for following cable size and connected to switchgear terminals with brass / cadmium plated nut bolts in approved manner, brass cable glands of suitable sizes, earthing connection etc., specified and required. a) 3.5 C x 185 - 300 sq.mm Al cable (1 Nos.) b) 3.5 C x 10 - 120 sq.mm Al cable (4 Nos.) c) 4C x 4 - 16 sq.mm Cu cable (6 Nos.)

Design, Supply, Installation, Testing & Commissioning of IP42 Cubical MV Panel in existing panel room as per Technical specification and in co-ordination with Engineer-in-charge. All MCCB should be of 3 Pole with Neutral link, Spreader Terminal, Phase barrier & Extended Rotary handle. a) 100 A MCCB 36 KA - 1 No. (As Incomer) b) 63 A MCCB 25 KA - 08 Nos. (Outgoing feeder)

Rerouting & Terminating In/Out cables in to new panel by taking shutdown in a shortest period. Relaying & End jointing of copper / aluminum conductor XLPE armoured cable by crimping method complete with supply of all joints materials like copper / aluminium lugs confirming to standard suitable for following cable size and connected to switchgear terminals with brass / cadmium plated nut bolts in approved manner, brass cable glands of suitable sizes, earthing connection etc., specified and required. a) 3.5 C x 185 - 300 sq.mm Al cable (1 Nos.) b) 3.5 C x 10 - 120 sq.mm Al cable (8 Nos.) c) 4C x 4 - 16 sq.mm Cu cable (2 Nos.)

Necessory filling as per site condition at each panel location floor crossing fire barrier of 2 hours rating duly tested as per UL1479 /ISO 834 shall be provided. Considering 3000mm X 1200mm X 200mm approx for each floor.

Cat (B) - Buy Back Items

Buy-Back (ie minus) Credit for existing panel 400A 12way (power panel at basement Annexe Block) with bus bars, all incoming & outgoing SFU’s from 63-400A and angle iron frame complete including its dismantling of existing panel 12 way (power panel at floor location of Annexe Block as shown by Engineer-in-charge) with SFU's of 63-400A, bus bars, cable, cable glands and interconnections complete with angle iron frame and making the site clear by making surface good and as per the instruction of Engineer-in-charge.

Buy-Back (ie minus) Credit for existing panel 200A 12way (power panel at different floor locations of Annexe Block) with bus bars, all incoming & outgoing SFU’s from 63-200A and angle iron frame complete including its dismantling of existing panel 12 way (power panel at floor location of Annexe Block as shown by Engineer-in-charge) with SFU's of 63-200A, bus bars, cable, cable glands and interconnections complete with angle iron frame and making the site clear by making surface good and as per the instruction of Engineer-in-charge.

Buy-Back (ie minus) Credit for existing panel 200A 8way (power panel at different floor locations of Annexe Block) with bus bars, all incoming & outgoing SFU’s from 63-200A and angle iron frame complete including its dismantling of existing panel 8 way (power panel at floor location of Annexe Block as shown by Engineer-in-charge) with SFU's of 63-200A, bus bars, cable, cable glands and interconnections complete with angle iron frame and making the site clear by making surface good and as per the instruction of Engineer-in-charge.

Buy-Back (ie minus) Credit for existing panel 200A 8way (power panel at different floor locations of Annexe Block) with bus bars, all incoming & outgoing SFU’s from 63-200A and angle iron frame complete including its dismantling of existing panel 8 way (power panel at floor location of Annexe Block as shown by Engineer-in-charge) with SFU's of 63-200A, bus bars, cable, cable glands and interconnections complete with angle iron frame and making the site clear by making surface good and as per the instruction of Engineer-in-charge.

Power Automation and Controls

JAMES ELECTRICALS PRIVATE LIMITED

JYOTI ELECTRO SYSTEMS PVT LTD

FRIENDS ELECTRICALS

Jaydeep Agency Corporation

Ramesh Electrical and Mechanical Works