District Hospital Sonapur up to the mark State of Art 2nd Floor Right Part COVID 19 Patient Ward

Amount

Demolishing skirting/ dado in walls/ R.C.C. & P.C.C. members without causing damage to walls/ member upto any height including disposal of debris as directed for all levels

Demolishing CC flor of various thickness including top layer and base course and disposal of debrises directed for all levels

Demolishing mosaic floor of various thickness, both mosaic and cast-in- situ type including CC base course removal of debris directed at all levels.

Providing and laying four course water proofing treatment with bitumen felt over roof consisting of first and third courses of blown or residual bitumen applied hot @1.45 kg per sqm of area for each course second of roofing with fell type 3 grade1(hessian base self finished bitumen) and fourth and final course with stone grit 6mm and downsize felt pea gravel spread @0.06m3 per sqm including preparation of surface excluding grouting etc as directed and specified

Plain Cement Concrete floor base in Prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 36mm including dewatering c) 100mm thick

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). c) Delux range Somany/ Orient/Nitco/Varmora Make ii) Of size 300mmx450mm and above

Providing vitrified tiles of approved quality,shape and thickness not less than 8mm on floors,skirting treads and riser of steps over cement mortar bed 15mm thick in pop cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix A. Tile(Choksey/Sika pedelite/Rouf/White Cement slurry mixed with approval pigment to match shade of tles complete at all levels as apecified and directed.(coloured pigment should be in confirming with colour of tiles and as approved and directed by the dept. 10 of size of 300mmx450mm and above.

Providing vitrified tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) Normal range Somany/Orient/Nitco/Varmora/Jhonson/Make) Of size 600mmx600mm and above

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling sections of 0.55 mm thk with knurled web of 51.5 mm and two equal flanges of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips perpendicular to the intermediate channel at 457mm c/c and 12.5 mm thk gypboard fixed to the ceiling sections with 25 mm drywall screws at 230mm c/c. the boards joints are finished with joint paper and two coats of drywall topcoat at all levels including cutting for providing and fixing light fixures whwre ever necessary. and as p[er design (1) 9.5mm thick.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and (a) plastic emulsion paint of approved brand and manufacture(Asian paintsBerger Paint/ICJ paints/J&n Paint /Nerolac

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. (a) ready mixed with red lead/red oxide primer

Synthetic enamel paint,aluminium paint/bituminous on steel and other metal surface 1)Removing oil Paint from steel and toher metal surface and making the surface even with A) hand scraping

Supplying,fitting and fixing MAC blinds horizental and vertical complete as specified and directed by the department at all levels (A) Vertical Blinds (a) Regular (iii) 75mm

Providing two coats of Birla White Wall Care Putty(Water Resistant White Cement based outty for concrete/ortar wall and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone,putty blade or wire brush and moistering the wall with sufficient quantity of clean water as specified and deducted by te department. (Total thickness of two coats is maximum 1.5mm) Thickness=1 5mm thick

Finishing wall with water proofing cement paint of approved brand and manufacture and of required said on new wall surface(two coats) to give an even said after thoroughly brooming the surfaces to remove all dirt and remains of loose powdered materials

NON -Scheduled Works Providing fittinf fixing PVC panels for Wall(plain0 & ceiling with material installation including labour,carriage etc as directed and specified

Analysis 3(Rate approved vide CE's letter no. GMC 33/2015/56 dtd. 29-10-2018 ) (Analysis enclosed): Supplying and installing uPVc-Casement Door made out of Lead free,UV resistant green profile of BIS standard uPVC sections,multichambered sections of with corners fusion welded,fully reinforced with galvanized steel atleast 1.5/2mm thick including glazing bead, groving bead,drain cap,fisher screws,packing pieces,nescessery stainless steel screw etc complete as directed. The Casement Door must be installed complete with all kinds of ironmongey including EPDM gaskets,bridging wedges and glass packers and with suitable water drainings system. Application of silicon sealment from inside/outside downcoming/GE or equivalent complete as direction with 19mm uPvc of minimum sizes 58mm x79mmx2.4mm thick wall for frame,58mmx79mmx2.4mm thick wall for sash Aluminium threshold at bottom. 1) Using minimum 19mm thick Upvc board profile in sash (Winsta KOMMERLINE)

Providing ditting and fixing of 30mm thk BWP grade green/century/or equivalent) solid core fush door with 6mm glass panels fixed on rebate on the face and timber beads on back. The edges of the flush door shall be finished with 6mm thik teak wood liping. The timber beads and teak wood liping shall be olished as per the approved shade of clour and the door to be finished with 1mm thick laminate(green/century or equivalent make) on both sides as well as the rebate including nescessary hardware fittings like 100mmSS hinges ad screws as per design as directed

Providing,Supplying and fixing of Frameless Single Leaf/double Swing Glass Door of Dorma/Ozone or equivalent make in glazing using 12mm thick toughered glass of Saint Gobain/or Approved equivalent with die cast patch fitting ,Floor Springs,with Stainless steel cover includinf fixing of patch fittings,floor springs,locks handles,etc using the hardware items as detailed,complete in all respects as per detailed drawings,specifications and direction of Engineer in charge,Single Leaf door with Dorma or equivalent or hardware specified: swing Glass Door which includes each of Top Pivot Pt 24,Bottom patcg PT10,Top 75v with pair of TGDIH SS Pull handle 25mmx 450mm long and other accessories for self closing as per detailed draings

SANITARY AND WATER SUPPLY WORKS Providing fitting fixing PVC panels vitrous water closet squatting pan (Indian type W.C Orissa Pattern) with all fittings and fixtures complete including,cutting and making good to the walls and floors wherever required.(flushing Cistern to be paid separately) Indian type W.C orisaa pattern of size 580x440mm b)coloured ii) Hindware make

Providing fitting fixing vitrous water china pedestal type water closet(European type W.C pan 400mm high) with seat and lead, CP Brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and bracket required.

Providing fitting fixing vitrous water china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions etc complete including painting of fittings and brackets,cuting and making the walls and floors good wherever required

Supplying fitting and fixing vitrous china division plate including fitting and fixing compete as directed and specified (ii) Hindware make (a) coloured i)Division Plate

Providing Vitrous China Wash Basin with CI/Ms brackets, c.P brass chain with plug, PVC waste pipe including painting of ittings and brackets,cutting and making good the walls wherever required.(pillar cock,stop cocks,waste coupling are to be paid separetely PEDESTAL BASIN(with pedestal) (b)Coloured Cascade NxT 550x440 with short Pedestal and spring set (Cat

Supplying fitting and fixing C.P pillar cock of 15mm dia of approved brand as specified and directed. (ii)Jaguar make

Providing fitting and fixing soap tray/soap dish complete as directed and specified (ii)Jaguar Make (b) Queen's (Cat no AQN-7731)

Supplying fitting and fixing C.P towel rail complete as directed and specified (ii)Jaguar make

Supplying fitting and fixing C>P bib cock 15mm mm dia of approved brand as directed and specified. (G.I&C.P pipes wil be measured deparately (ii) Jaquar make (b)Queen's collection /the Stealth Rangers(for VIPuse. Prior approval of Chief Engineer Pwd(Bldg) must be taken before use) (i)C.P bibcock with wall flange

Supplying fitting and fixing Chrome Plated (C.P) shower 15mm dia. Of approved brand as directed and specified.(pipes will be measured and paid separately). (iii0 Jaquar make (a)Continental (b)Queen's Collection (i)Overhead rose shower with revolution joint& 150mm long swivel

Supplying fitting and fixing Chrome Plated(C.P) wall mixer complete as directed (V) Jaquar make (b)Continental (I) Wall mixer non-telephonic Cat no 217 for Wash basin

Supplying fitting and ixing Ajoy Flowguard CPVC(ChlorinatePoluvial Chloride) pipe having thermal stability for hot and cold water supply including all CPVc plain and bruss threaded filleting including clamps at 1.00m, spacing including jointing of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified (b) Concealed by chiselling or breaking brick wall/C>C/R.C.c and making good to the damages (a) 15mm OD

(b) 20mm OD

(b) 25mm OD

Supplying fitting anf fixing PVC pipes of 6kg/cm2(Supreme/Prince) or other ISI approved including, joining, fitting and fixing etc as nescessary complete aat all levels including below (b) Concealed by chisellling or breaking brickwall/C.c/R.C.C and making good to the damages (i) 160mm dia

(i) 160mm dia

ii 110m dia

Supplying fitting and fixinf PVC Plain single tee of (Supreme/Prince) or other ISI approved including,joining,fitting and fixing etc as nescessary complete at all levels including below G.L as directed (b)Concealed by chiselling or breaking brick wall/C>C/R.C.C and making good to the damage (i) 160mm dia

(iii) 110mm

Wiring for light fan/call bell point with 2x1.5sq mm P.V.C insulated single core unsheathed industrial(Multistrand) cable HFFr/ZHfr confirming to IS-694:1990cwith flexible briht annealed electrolytic copper conductor for voltage grade upto 1100volts(Finolex/RR Kabel/Nicco or Equivalent Make as approved by the Deptt.) in recessed conduit wiring system with 2mm thick 20mmdia rigid low halogen SFT PVC IS:9537 Part-III conduit(BErlia/AKg/Precision/Presto/Plast/Polycab/MW or equivalent make as approved by the Deptt.) complete SP upto 6.00metre length

MP upto 6.00 metre length

LP upto 10.00metre length

Wiring to a pin 6 Amps plug point with 1.5sq mm P.V.C insulated single core unheated industria (multistrand) cable HFFR/ZHFR confirming to IS-694: 1990 with flexible bright grade up to 1100volts (Finnolex/RR Kabel/Nicco or Equivalent Make as approved by the Deptt.) in recessed 2mm thick rigid low haloge SFT PVC IS:9537 Part-iii conduit (Berlia/AKG /Precision/ Presto/Polycab/MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5mm cable to third pin of the plug socket etc as reqd complete SP upto 3.00metre length

MP upto 6.00 metre length

LP upto 10.00metre length

Wiringto a 5pin 6 Amps plug point with 1.5sq mm P.V.C insulated single core unheated industria (multistrand) cable HFFR/ZHFR confirming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100volts (Finnolex/RR Kabel/Nicco or Equivalent Make as approved by Deptt.) n recessed 2mm thick rigid low halgen SFT PVC IS: 9537 Part-iii conduit (Berlia/AKG/Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) wiring system including earth continuiy with 1.5mm sq mm cable to third pin of the plug Socket etc as required complete SP upto 3.00metre length

MP upto 6.00 metre length

LP upto 10.00metre length

With 3x1.5 sq mm cable in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-iii conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2x2.5 sq mm + earth conduity with 1x1.15cable in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-iii conduit

With 2x4 sq mm + earth conduity with 1x2.5cable in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-iii conduit

With 2x6 sq mm + earth conduity with 1x4 sq cable in 20mm dia 25mm thick/heavy rigid PVC IS:9537 Part-iii conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 4x10 sq mm + earth conduity with 2x6 cable in 40mm dia 2mm thick/heavy rigid PVC IS:9537 Part-iii conduit

With 4x106 sq mm + earth conduity with 2x10 sq mm. cable in 40mm dia 2mm thick/heavy rigid PVC IS:9537 Part-iii conduit

B. SWITCH/SOCKET/PLATE ETC Supplying including installation of socket outlet 10/16 Amps 3/5 pin combone shuttered complete, MODEL RANGE LEGRAND (ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE (MURANO), including making necessary connection as per direction of department

Providing ditting and fixing of 30 mm thk BWP grade green/century/ or equivalent)solid core flush door. The edges of the flush door shall be finished with 6mm thk teak wood liping. The teak wood lipping shall be polished as per the approved shade of colour and the door to be finished with 1mm thk laminate (green/century or equivalent make) on both sides including nessecary harware fittings like 100 mm SS hinges and screws, as per design and as directed.

Sopplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR,(AVE), MK(BLENZE) SCHNEDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department

Sopplyinh including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR,(AVE), MK(BLENZE) SCHNEDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department

Sopplyinh including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR,(AVE), MK(BLENZE) SCHNEDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department 3 MODULE

6 MODULE

12 MODULE

Sopplyinh including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR,(AVE), MK(BLENZE) SCHNEDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department 3 MODULE

6 MODULE

12 MODULE

Sopplyinh including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR,(AVE), MK(BLENZE) SCHNEDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department

C. FITTINGS ANF FIXTURES Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25cm cast back plate and bras lamp holder complete including connection as approved by Deptt. As required without lamp.

Supplying and installation,testing, Commission of the folowing indoor Decorative recess mounted LED down lighter luminaries of model no-DN 394B LED 16S-6500 PSU WH/MV1857RLOD/MV1840RLOO/MV183LOO/MV183RLOO/MV1857R500/MV184RL00/CRDL11R023HP57 complete with all accessories such as ballast,starter etc. In the false ceiling type Amstrong/Gypsum or similar ceilng mounting with necessary support with 1.5 sq. mm. PVC insulated S.C copper conductor as reqd. and as drected by the department (Philis/Lt/Wipro make)

Supplying fitting and fixing of LED Kubik Batten tubes light fitting 300mm length as required and as directed by department (jaquar or equivalent make) kubik series batten tube fitting 10w

Supplying fitting and fixing of LED Batten tubes high quality aluminium extruded with decorative end BN 021 LED 20 S PSU CW GR S2

Supplying fitting and fixing of LED Bulb non-dimmable in the existing batten/ angle holder as reqd and directed by the department (jaquar or eqvt. Make)

EARTHING Installation of earth station with 40mm dia and 4.5 mtr long GI pipe with necessary GI reducimg socket 40mm*20mm size looking arrangement with hinged cover plate,funnel , GI nuts through bolts etc for putting pipe and refitting with necessary enclosure on the top etc as required complete.

Extra for using salt 5kg and charcoal 64kg for pipe earth electrode as reqd.

Supplying and laying with 6SWG GI earth wire at 0.50m ground level or conductor earth electrode including soldering,excavation work and refitting etc as reqd

E. CEILING/ EXHUAST FAN Supplying including fitting fixing of following star rated A.C Ceiling fan complete with all accessories like down rod,canopy etc of following sweeps with making necessary connection cable as approved by the deptt etc as required complete and as directed by the Department (Without regulator) (ORIENT PSPO make /Usha/ CROMPTON MAKE/Havells/ ATC/V.Guard make Energy efficient 5-star 1200mm sweep. ORIENTPSPO/USHA/CROMPTON/HAVELLS/ATC or equivalent make

Supplyinh Including fitting fixing of following A.C Exhaust an in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt as reqd by the Department Power flow 225 sweep (ORIENt MAKE0

F.A.C WORK Gas Charging of Split type A.C with F-22 fresh refrigerant 2 ton capacity

Dismantaling and Shifting of existing A.C machine 2 ton capacity

G. MCB/MCBDRB/RCCB ETC. Supplyinh with fitting and fixing sheet steel,phosphatised,powder painted dust&vermin proof Double door Ip-43 double door surface mounting TPN MCB DB incorporated with bas-bar,Neutral link ,Earth and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved,specified and directed by the deptt. ABB,Schneider MG,Legrand,Hager make 12 way SPN double door

Supplyinh with fitting and fixing sheet steel,phosphatised,powder painted dust&vermin proof Double door Ip-43 double door surface mounting TPN MCB DB incorporated with bas-bar,Neutral link ,Earth and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved,specified and directed by the deptt. ABB,Schneider MG,Legrand,Hager make 4WAY tpn(4+12) double door

Supplying with fitting and fixing inglse Pole 10KA 240/415v 50Hz MCB of the following capacity complete with making necessary connection as approved,specified and directed by the Deptt. c series 6-32A

Supplying with fitting and fng 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the followig capacity complete with making necessary connection as approed, specified and directed by the deptt. 100/300ma sensitvity 4p RCCb 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415v 50Hz MCB of the following capacity complete with making necessary connection as approved,specified and directed by the Deptt. 30maA sensivity DP RCCB (ABB,Schneider MG,Legrand,Hager make) 40A

Supplying with fitting and fixing 4P 10KA 240/415v 50Hz MCB of the following capacity complete with making necessary connection as approved,specified and directed by the Deptt. C series (ABB,Schneider MG,Legrand,Hager make) 63A

Supplying fitting and fixing industrial plug Socket SPN sheet steel Powder painted MCB DB incorporated with MCB DIN RAIL, NEUTRAL LINK Earth bar of the following rating of DP MCB complete with making necessary connection etc as specified and directed by the Deptt. 20a Capacity (Abb,Scheneider MG,Legrand,Hager make)

Sri Rajdeep Bezbaruah