REPAIR REPLACEMENT OF ROOFING SHEET, FALSE CEILING, LEAKAGE SEEPAGE WATER PROOFING TREETMENT AND OTHER ASSOCIATED WKS AT SEWAR FORT OF

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces finished even & smooth complete all as specified and as directed .

Ditto all as per Srl item No 02 here in above but in CM (1:6) other than fair faces finished even and smooth without using extra cement complete all as specified and as directed ..

M & L Preparation of plastered surfaces & apply for two coats Apex Weather Proof emulsion (water Based 100% Acrylic) or approved equivalent grade paint using hand roller over one coat exterior grade wall primer on cement plaster,concrete,exterior ceiling etc,including surface to be painted shall made free from any loose paint,dust,grease, fungus, algae,moss shall got be removed.All materials shall Asian/Nerrolac/Berger/Dulux Make .Color & Patterrn/Color combination of paint shall got appproved By Eng In Charge

M & L Preparation of new decorated plastered unplastered surfaces surface of wall including cornices, pilasters etc by brooming down and applying two coats of cement base paint of approved shade over a one coat of primer on walls with hand roller complete all as specified and as directed

M & L Preparation of new decorated plastered unplastered surfaces surface of wall including cornices, pilasters etc by brooming down and applying two coats of oil bound distemper over one coat of primer of approved shade on walls by roller all as specified & directed

M&L for 2 mm thick JK Cement wall Max Putty on Wall Surface surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified and as directed .

M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified and as directed

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified and as directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc. complete all as specified and as directed .

M&L Brick work with sub class 'B' old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed .

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed .

Taking down shutter of any description area exc 1 sqm and n. exc 2 Sqm each complete all as specified and as directed .

Taking down chowkats or frames exc. 1.5 sqm but not exc. 4 sqm each without taking off shutters from frames complete all as specified and as directed .

S&F in repair of 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, free from twist or wrap in plane,both face is covered with decorative face veneer with internal wooden frame lipping not les than 50mm complete all as specified and as directed .

Providing and fixing in repair12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, complete all as specified and as directed . (Door handle, lock and stopper etc.not to be paid separately).

S&F 35 mm thick 2nd class hardwood( hollock ) factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces size of members as per IS 1003 Part-I complete all as specified and as directed .

S&F 35 mm thick 2nd class hardwood ( hollock ) factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in SSR Part I complete all as specified and as directed .

S&F steel ventilator with top hung shutter including hinges,steel peg stay, handle complete all as specified and as directed .

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed .

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified and as directed ..

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and as directed .

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked) complete all as specified and as directed .

Mild steel presses steel bow handle oval type stove enameled black of size 150 mm (ISI marked) complete all as specified and as directed .

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed complete all as specified and as directed .

Factory made steel window with side hung shutteers including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of zinc chromas primer complete all as specified and as directed .(Note :- Mild steel wire cloth shall be measured and paid separately under respective items)

Ditto all as per item No 26 above but without glazing bars complete all as specified and as directed .

S & F in repair kitchen cub board 20 mm thick pvc board of any size ,pattern & shade provided with shelves ,partitions and glass shutters with stainless steel ISI marked fittings as hinges (02 Nos in each shutter), handles (01 No in each shutter ),fancy Knobs (01 No in each shutter) & magnatic locks and any other fittings required including all fittings & fixtures ,shape/pattern complete all as specified & directed

S&F in repair mild steel continuous (piono) hinges,bright finish or elctra galvanised,width of flag (when open) 30mm complete all as specified & as directed

S & F auto hinges for cabinet case complete all as specified and as directed .. Make : Karf/ Hetch/ Homecare

M&L dismantling floor,heart or wall tiling including cement mortar bed(but not backing) , removing serviceable tiles to store and rubbish off the premises all as specified.

M&L Glazed ceramic Digital Tiles,matt/glossy finish in vertical surface,in required combination of themes ,area of each tiles exceeding 0.9 sqm but not exceeding 0.27 Sqm 7-8mm thick set and jointed in neat cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed

Providing and laying dual charghed vitrified floor tiles of Size of Tile 600x600 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and as directed

Ditto all as per Srl Item No 33 here in above but Size of Tile 1000x1000 mm

M & L for non skid ceramic coloured tiles 7 to 8 mm thick area of each of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/ risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement, incl rendering 10 mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete all as specified and as directed Make: H & R Johnson/kajaria

Dismantling of stone slab and tiles of any description or thickness in floors, etc complete all as specified and as directed.

Providing and fixing 20 mm thick gang saw cut Granite of any colour and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and as directed

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete all as specified and as directed

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete all as specified and as directed

M&L for Sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n. exc 0.50 sqm in each pane complete all as specified and as directed

Galvanised mild steel wire cloth 0.50 mm nominal dia if wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed

Supply and fixing anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminum angle of size 40 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board of make Armstrong in fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification complete all as specified and as directed

Cutting, polishing existing Kota/ marble floor flooring,(three cuttings and mirror polishing) including Manson polishing, levelling certain places to Kota/ marble floor ,necessary repair work complete all as specified and as directed

M&L for providing Square/Rectangular,raised platform of hight 20 cm below the tank and base dia min 100 MM projected by the external dia all around of tank for pvc cylendrical tank of capicity 500/1000 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified and as directed

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and as directed

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed

S& F in reapir Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm th, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and as directed

M&L for fixing in repair 10 mm thick hollow section polycorbonate sheet suppoerted with ribs any colour shade including notched aluminium strip not less than 32 mm wide both edges and with packed with rubber gasket at joints, finaly sealed with silicon gel complete all as specified and as directed

Dismantling boarding of any description, fixed in any position with nails complete all as specified and as directed

S&F in repair for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC ange fixed with solvent cement complete all as specified as manufacturer's Instructions complete all as specified and as directed

M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab also including 25 mm thick cement concrete type B-0. 1:2:4 (12.5 mm graded aggregate) stone aggregate a in sub base for stone flooring including rubbing and polishing complete all as specified and as directed

All as per item No 54 but thckness 20-25 mm above as in skirting,dado,riser of step etc. complete all as specified and as directed

M&L for cutting chases , pinning in , making good to facing where required and pointing in CM 1:3 to end or edges for concealed water tubing exc 10 cm but nexc 20 cm girth complete all as specified and as directed

Dismantling and taking up or down the existing unserviceable GI pipe of size 15 mm bore and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed

Ditto all as per Srl Item No 57 here in before but of size 20 mm bore

Ditto all as per Srl Item No 57 here in before but of size 25 mm bore

S&F for in repair Brass Chromium plated 3in1 mixture (Provn for overhead shower & hand shower) complete all as specified and as directed (Make;- PRAYAG Cat No 7980-F or equivalent)

S&F for in repair Brass Chromium plated pillar cock with 450 mm long braided hoses complete all as specified and as directed. (Make;- ESSCO cat part no APR 10101 or equivalent)

S&F for in repair Brass Chromium plated concealed stop cock heavy 15mm with flange complete all as specified and as directed (Make;- PRAYAG Cat No 6618 or equivalent)

S&F for in repair Brass Chromium plated sink mixture with swing spout (wall mounted model) with connecting leg and wall flange complete all as specified and as directed (Make;- ESSCO cat part no APR 101309 N or equivalent)

S&F for in repair Brass Chromium plated two way Bib cock with wall flange complete all as specified and as directed. (Make;- ESSCO cat part no APR 101041 or equivalent)

S&F for in repair Brass Chromium plated Bib cock with wall flange complete all as specified and as directed. (Make;- PRAYAG Cat No 6606 or equivalent)

S&F for in repair Brass Chromium plated long body Bib cock with wall flange complete all as specified and as directed. (Make;- ESSCO cat part no APR 101107 or equivalent)

S&F for in repair Brass Chromium plated Angular stop cock with wall flange complete all as specified and as directed (Make;- ESSCO cat part no APR 101053 or equivalent)

S&F for in repair Urinal Spreader complete all as specified and as directed (Make;- PRAYAG Cat No BEA 25 or equivalent)

S&F for in repair Peg Sey 6 (Zinc) complete all as specified and as directed (Make;- PRAYAG Cat No BEA 30 or equivalent)

S&F for in repair Brass Chromium plated Jet spray wit 1 metre PVC tube covered SS covered complete all as specified and as directed (Make;- ESSCO cat part no ALE 547 or equivalent)

S&F for in repair Brass Chromium plated Bottle trap with fully casted body 32 mm bor, 300mm and 125 mm long connecting pipe and wall flange complete all as specified and as directed (Make;- ESSCO cat part no ALE-773ML190 x 125 or equivalent)

S&F for in repair Brass Chromium plated overhead shower 80 mm square shape single flow (ABS body chromium plated with grey face plate) with 450 mm long coonecting pipe with rubbit cleaning systemand wall flange complete all as specified and as directed (Make;- ESSCO cat EOS-1985 or equivalent)

S&F for in repair Brass Chromium plated Towel rail complete all as specified and as directed (Make;- PRAYAG Cat No BA 30 or equivalent)

S&F for in repair Brass Chromium plated Soap dish with polycorbonate plate complete all as specified and as directed (Make;- ESSCO cat part no AEC 1133 or equivalent)

S&F in repair viterous china bowl for couple closet WC with PP soft close seat cover, Hinges fixing accessories and accessories set , 375mm x 665mm x 755 mmof S trap 110 mmalongwith cistern complete all as specified and as directed(Make;- ESSCO combination cat part no MVS-WHT-75155 and MVS-WHT-7515N,SS or equivalent)

S&F in repair viterous china Table top basin with CP waste coupling , 435mm x 375mm x 130 mm complete all as specified and as directed(Make;- ESSCO cat part no ECS-WHT-933 or equivalent)

S&F in repair viterous china Counter top basin Oval shape with CP waste coupling , 530mm x 445 mm x 195 mm complete all as specified and as directed(Make;- ESSCO cat part no ECS-WHT-601 or equivalent)

Providing and fixing in repair One urinal basin with 5 litre white P.V.C. automatic flushing cistern white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete all as specified and as directed

M&Lin repair of cast iron nahani trap of 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm complete all as specified and as directed

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked of 75mm bore complete all as specified and as directed

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified and as directed

S&Fin repair of UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore complete all as specified and as directed

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed

S&F sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1215mm x 460mm, bowl size 410mm x 330mm x 190mm including waste pipe of polythelene of low or high density or pvc 32 mm dia &waste coupling brass chromium plated for 32 mm bore with long screwed shank and fly nuts including making holes in any type of wall for brackets and fixed in cm 1:3 or pcc 1:2:4 type B0 complete fixed in repair .Make of sink -comet/neelkamal/hindustan/devidayal/ kitchenqueen/ jaquar complete all as specified and as directed

Dismantling of old U/S grating of any description or size and S&F new CP cockroch trap grating 75/100/125 mm dia of weight not less than 40 gm for floor trap/Nahani trap complete all as specified and as directed.

Preparation of new or previously untreated steel surface of any description not oterwise described over 10 cm width or girth and appying two coat of synthetic enamel paint over a coat of red oxed prier all as specified and directed. Make: Asian Paint(apcolite)/ Berger paints (Luxoli gloss)/shalimar(Superlac hi gloss)

M & L prepration of new wood or wood based surface of any description over 10 cm widtgh or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make: Asian Paint(apcolite)/ Berger paints (Luxoli gloss)/shalimar(Superlac hi gloss)

Dismantling 1000 ltr water tank and M&L new 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all as specified in SSR part-I complete all as specified and as directed

Dismantling 500 ltr water tank and M&L new 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all as specified in ssr part-I complete all as specified and as directed

De-vegetation from the bldgs by chemical injection of Round Up (arsenic base) compound and subsequently uprooting by physical means without damaging the historic fabric and structure of the building under strict supervision of conservation complete all as specified and as directed

M&L 40 mm thick stone Sikandra jali including all curving and moulding of corners fixed in cement mortar 1:4 application with colouring to match with colour of jali including fixing of jali for all corners & lift complete all as specified and as directed

S&F stone pillars(post) of size 100x100 mm including engraving decorative design of approved pattern on two face and dome shape approved by GE , height of each post not less than 0.75m ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified and as directed

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with m.s. squre tube complete all as specified and as directed

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

S & F powder coted Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed

S & F powder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats zlazing clips,rubber neoprene packing handles 2 Nos in each door,hinges anodized aluminium snap beading screw etc complete all as specified and as directed

Providing & fixing Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm), including aluminium extruded interlocks, EPDM rubber gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's . After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing complete all as specified and as directed

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long Nos suitable handle Nos complete all as specified and as directed

S&F Aluminium extruded section body door closer hydranlicelly regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S&F toughnend glass of approved make & brand of 5 mm thick colored /tinted/smoke glass/clear glass conforming to IS :2553 (Part-I)-1990 for glazed shutters for doors, windows and & partions using with glazing clips and special metal-sash putty of approved make, or metal beading with screws, complete all as specified and as directed

M&L for providing and fixing 4mm thick Aluminium Composite Panel (ACP) Sheet for partion,door of approved make,color & shade.Joint of sheet to be finished with selecon based sealent also including all fittings & fixtures complete all as specified and as directed

M&L For PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge complete all as specified and as directed, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

M/S MAMTA CONSTRUCTIONS

GANGA CONSTRUCTION