Special Repairs to DRDO Transit Facility at NSTL, Goa

Amount

SUBHEAD-I (CIVIL WORKS)

Dismantling stone slab flooring in cement mortar including stacking lead upto 50m lead, etc complete

Dismantling tile work For thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Removing white or color wash completely by scrapping , sand papering and preparing the surface, etc complete

Removing dry or oil bound distempering completely by scrapping , sand papering and preparing the surface, etc complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Glazed Ceramic floor tiles 300mx300mm ( thickness to be specified by manufacturer) of 1st Quality conforming to IS: 15622 of approved make and shade on cement mortar 1:4 ( 1 Cement : 4 coarse sand ) including pointing the joints with white cement and matching pigments etc complete

Providing and laying polished vitrified floor tiles of size 600mmx600mm in floors/skirtings (thickness to be specified by the manufacturer )with water absorption less than 0.08% and conforming to IS:15622 of approved make and color and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand) including grouting the joints with white cement and pigments etc complete

Kotah stone slab flooring over 20mm thick average base laid over and jointed with grey cement slurry mixed with pigments to match the shade including rubbing, polishing complete with base mortar in cm 1:4 ( 1 cement : 4 coarse sand )

Providing and fixing 18mm thick gang saw cut (premoulded and prepolished) machine cut Granite stone with area exceeding 0.5 sqm for kitchen platforms, vanity counters , window sills of approved shade, colour and texture over 20mm thick cement mortar 1:4 with joints treated with white cement, matched with matching pigments including rubbing, curing polishing to give high gloss Granite stone slab colour black, cherry, ruby red

Extra for providing edge moulding to granite stone 18mm

Extra for fixing marble/granite stone in over and above corresponding basic items , in facia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc complete

Extra for providing opening of required size and shape for wash basins, kitchens sinks in kitchen platforms, vanity counters and similar locations in marble/granite/stone work including necessary holes for pillar taps including rubbing, polishing of cut edges etc complete

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing factory made uPVC white colour sliding glazed Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg),

Providing and fixing SS cramps of required size and shape in RCC/CC backing with cm 1:2 including drilling necessary holes in stones and embedding the cramps in the hole ( fastener to be paid separately)

Providing and fixing 6mm dia expansion hold fasteners on CC/RCC surface backing including drilling necessary holes and the cost of bolt etc complete

Providing and fixing G.I Pipes complete with G.I fittings and clamps i/c making good the walls etc concealed pipe including painting with anti corrosive bitumastic paint, cutting the chases and making good the wall

a)15mm dia nominal bore

b)20mm dia nominal bore

Providing and fixing G.I Pipes complete with G.I fittings including trenching and refilling etc for External work

a)20mm dia nominal bore

b)25mm dia nominal bore

Providing and fixing Gun Metal Gate valve with CI wheel of approved quality

a)25mm nominal bore

Providing and fixing ball valve(brass) of approved quality High or Low pressure with plastic floats complete

a)20mm nominal bore

b)25mm nominal bore

Providing and fixing wash basin of size 550mmx400mm with a pair of 15mm CP brass pillar taps with CI brackets , 32mm CP brass waste coupling

Providing and fixing white Orrisa type Vitreous China water closet Squatting pan size 580x 440mm with 100mm P / S trap , 10Lit low level flushing cistern with manually controlled device including all fittings and fixtures

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete

Providing and fixing long body CP Brass Bib Taps 15mm

Providing and fixing C.P Brass Angle valves for basin mixer and geyser points of approved quality conforming to IS:8931 with 15mm nominal bore

Providing and fixing 15 mm nominal dia each CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

Providing and fixing CP toilet paper holder

Providing and fixing bevelled edge mirror of size 600mmx450mm with 6mm thick hard board at back and PVC moulded frame including all CP screws, etc complete

Providing and fixing 30mm thick panelled glazed door shutter in second class teak wood including necessary MS butt hinges with screws etc complete

Providing and fixing fly proof Stainless steel ( grade 304 ) wire gauze of 0.5 mm dia wire width of aperture 1.4mm in both directions

Providing and fixing ISI marked Flush door shutters 30mm thick conforming to IS:2202 decorative type, core of block board construction with frame of Ist class hardwood and well matched teak 3 ply veneering with vertical grains on both faces of shutters and ISI Marked Stainless Steel Butt Hinges

Providing and fixing 1.5mm thick decorative high pressure laminated sheet plain/ wood grain in gloss/mat/seude finish with high density protective surface layer and reverse side of adhesive bonding conforming to IS:2046 type S including cost of adhesive of approved quality

Providing and fixing bright finished brass butt hinges with necessary screws

a)125x85x5.5 mm thick heavy type

Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws

Providing and fixing bright finished brass 100mm mortise door latch and lock with 6 levers and a pair of lever handle with necessary screws.

Providing and fixing 125mm bright finished brass handles with necessary screws

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. each

Providing and fixing IS: 3564 marked aluminum extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete

Providing and fixing double action hydraulic floor spring with Stainless Steel cover plate of approved brand and manufacture IS 6315 marked for doors including cost of cutting floors as required , embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc complete as per the directions of Engineer-in-charge

Providing and fixing powder coated aluminum work for shutters of doors, windows, ventilators, partitions extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixed with raw plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Alluminium sections shall be smooth , rust free straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panneling, C.P brass / stainless steel screws all complete as per architectural drawings and directions of Engineer-in-charge

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a)Float glass panes 4mm thick

b)Float glass panes 8mm thick

Providing and fixing anodised aluminium grills of approved design and pattern with approved standard section and fixed to existing window frame with CP / stainless steel screws @ 200mm c/c including cutting the grills to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and directions of Engineer-in-charge

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm

Applying one coat of cement primer of approved make on wall and ceiling surfaces

White washing three or more coats with lime to give an even shade

Distempering two or more coats with oil bound washable distemper of approved shade and manufacture to give even shade

Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer

Painting two or more coats with Synthetic enamel paint of approved shade and manufacture over under coat of ordinary paint

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work 75 mm diameter pipe metre

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

French spirit polishing :Two or more coats on new works including a coat of wood filler.

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing factory made 30 mm thick pre laminated PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

Providing and fixing ISI marked 25 mm thick (for cupboard) flush door shutters conforming to IS : 2202 (Part I) decorative type, including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws , core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing bright finished brass 100mm mortice door latch and lock with 6 levers and a pair of lever handle with necessary screws

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing 150 mm diameter C.P. brass shower rose with 15 or 20 mm inlet

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular

Providing and fixing 12.5 mm thick tapered edge gypsum moisture resistant board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Extra for any sunk or raised mouldings in the plaster of paris ( Gypsum anhydreous ) ceiling

Providing and fixing false 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white

with 6 mm reveal profile (white/black), comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

With cement mortar 1:4 (1cement: 4 coarse sand)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) cum

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer in-Charge.

Dismantling of old 150 mm diameter S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design 150 mm diameter S.W. pipe

Providing, laying and jointing 150 mm diameter metre glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

Providing and fixing 110 mm diameter metre on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing unplasticised - 75 mm PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.

Supplying and fixing C.I. cover 300x300 mm without frame for gullytrap (standard pattern) the weight of cover to be not less than 4.5 kg

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Demolishing brick work manually/ by mechanical means In cement mortar cum including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling C.I. or asbestos rain water pipe 100 mm dia pipe metre with fittings and clamps including stacking the material within 50 metres lead

Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. sqm

For sealing cracks and faulty construction joints, by preparing the surface, making U-shape groove size of 25x25mm and then priming the surface with integral crystalline slurry @0.05kg per running meter and while the surface is tacky then filling the groove upto top edge with crystalline mortar @1.50kg per running meter. Once crystalline mortar is touch dry then finally applying two coats of integral crystalline slurry @0.05kg per running meter per coat on treated surface.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Providing and injecting approved grout Epoxy injection grout in concrete/RCC work of approved make in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

S.W. gully trap P type 150x100 mm each

S.C.I. gully or nahani grating 100 mm dia each

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer in- charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. cum Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.

Credit for the serviceble material obtained from the following items:-

(a) Aluminium Extruded

(b) Old Wash Hand basin

(c) Old Unserviceable Building/ grills/ Gates Steel

(d) Wooden Shutters of any description

(e) Old WCs Orrissa/EWC

(f) Old Toilet Paper Holders

(g) Taps of any size

(h) Poly storage water tank

SUBHEAD-II (ELECTRICALWORKS)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm (Condute Size)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outletand 5/6 A modular switch, connections etc. as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

1 or 2 Module (75mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

2 way 5/6 A switch

3 pin 5/6 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing call bell buzzer suitable for single phase, 230 V, complete as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0. 7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supply of following LED fittings complete with electrical connections, fixing & mounting accessories. All the fittings to be supplied with lamps.

18/20 W led T5 Tube light equivalent to Garnet 20W Wipro Garnet Aluminium batten (Make Wipro, Phlips, Crompton or Equivalent)

10 W led T5 Tube light (Make Wipro, Phlips, Crompton or Equivalent)

5-10 W Desk Study Rechargable Lamp as per direction of Engineer in Charge (Make Wipro, Phlips, Crompton or Equivalent)

10 W LED Type bed light fitting as per Engineer in Charge direction

LED Decorative wall Fitting as per Engineer in Charge direction.

LED Miror light fitting equivalent to Philips 10-Watt Picture Light/Mirror Light or as per Engineer in Charge direction

35 Watt LED Post Top Letern Fitting/Gate Light as per Engineer in Charge direction

Garden Light (Post top lertern at 3 m hight, and 65 mm dia GI pipe) as per Engineer in Charge direction

Decorative Garden Light / Chinar lighting pole with Fittings at cotiyard area (3.5 mtr to 4 mtr hight)

50 W LED Outdoor (IP 65) Street Light with 40/32 mm dia GI pipe for mounting on Wall or on Street Pole etc as per Engineer in Charge direction (Make- Phlips, Wipro, Bajaj, Crompton or Equivalent)

Installation, Testing, Comissioning of wall Bracket/Celling fittingsof all size and shapes containing upto two GLS/CFL/LED lamps as per fitting, complete with all accessories including connection etc. as required.

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

8 way (4 + 24), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required But without MCB/RCCB/Isolator. (Cutting and cheasing of wall are also included in the scope of work wherever required)

12 way, Double door

Supplyirig and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing! MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SINGLE POLE

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)

Credit for the serviceble material obtained from the following items:-

Switches/Fan regulators/Sockets any description

Copper wires of any size and description

Light fittings of any size and description

SPN Distribution Board

SMS ASSOCIATES

Shri Lakshmi Narashima Enterprises

SHRAYA ASSOCIATES