Construction of pebhar blok, Shauchalya and Ghat from Shiv Mandir Parisar in Ward No-11 New Colony Under ??Nagar Parishad, Khagaul

Bill of Quantity for

Name of work:- कार्य का नाम:-नगर परिषद् खगौल अंतर्गत वार्ड संख्या-11 ( न्यू कॉलोनी) में शिव मंदिर परिसर में शौचालय एवं घाट तथा पेभर ब्लॉक पथ का निर्माण कार्य.

Date of Tender:- 13-04-2026

Group:- G.No-34

B.O.Q. Amount 1412544.00

Earnest Money 28251.00

Time of completion 04 Month

Cost of Boq 2500

Bid Processing Fee:- (Through online payment) AS Per Gen

sino. Sor BCD ITEM QTY Unit Rate Amount

1 2.29 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

2 BCD 20.3A.1 Making 25 cm (10") dia bore up to 4 meter depth below ground with hand auger of approved quality in ordinary soil (vide classifacation of soil item A) true to plumb and without eccentry city in any stage of operation and disposal of the excaveted earth up to 50 mtr lead in eluding all lifts all complete as er approved design and direction of E/1 Details of cost for 4 piles of 4m= 16 mtrs depth

3 BCD 2.8.1 Earth work in excavation in foundation trenches or drains ( not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms,lift upto 1.5m, including getting out the excaveted soil and disposal of surplus excavated soil as directed , within a lead of 50m,

4 BCD 2.28 Providing local sand filling etc…do all complete job

5 BCD 11.72 Providing Brick flat soling etc…do all complete job.

6 BCD 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttring -all work 1:2:4 (1cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size)

7 BCD 5.1.2 Reinforced cement concrete work in wall (any thickness) including attached pilasters buttresses,plinth and string courses,fillets.column pillars,piers,abutments posts and struts etc.

8 5.3 Reiforced cement concrete work in beams suspended floors, roofs having slope upto 15, landing, balconies, shelves, chhajas, lintels bands, plain window sills, staircase and spiral stair cases upto floor five level excluding cost of centring, shuttring finishing and reinforcement with 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size )

9 BCD 6.1.12/1 Brick masonary work in cement mortar (1:4) in foundation complete… etc do all complete job

10 BCD 6.1.14A+6.3A Brick masonary work in cement mortar (1:6) in Superstructure complete… etc do all complete job

11 (a) BCD 5.9.3 Centring and shuttering etc…do all complete job.

(B) BCD 5.9.5 Centring and shuttering etc…do all complete job.

(C) BCD 5.9.6 Centring and shuttering etc…do all complete job.

(D) BCD 5.9.19 P/V Centring and shuttering for chhaja ..do… do

12 5.22.7C Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete.

13 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement

14 BCD 13.11.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished witha floating coat of neat cement Details of cost for 10 sqm

15 BCD 22.3 providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C kitchen and the like consisting of (i) 1st course of applying cement slurry @ 4.4 kg/ sqm mixed with water proofing compound confirming to IS 2645 in recomended proportions. (ii) 2nd course of 20mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) mixed with water proofing compound in recomended peoportion, (iii) 3 rd course of applying blown or/residual bitumen applied hot at 1.7 kg per sqm area. (iv) 4th course of 400 micron thick pvc sheet ( overlaps at joints of PVC SHET DHOULD BE 100 mm wide and pated to each other with bitumin @ 1.7 kg per aqm)

qty vide same item no-17 34.68 m2 480.60 16669.14

16 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

A 18.8.3 25mm nominal outer dia pipes

B 18.8.4 32mm nominal outer dia pipes

C 1896 100mm SCI trap with vent heel.

D 17.39 Providing and fixing plain bend of required degree.

17.39.1.1 sand cast iron S&S as per IS -1729 7.00 each 457.20 3200.40

E 17.42 Providing and fixing double equal plain junction of required degree.

17.42.1.1 sand cast iron S&S as per IS -1729 4.00 each 881.20 3524.80

F 17.43 Providing and fixing single equal plain junction of required degree. With acees door, insertion rubber washer 3 mm thick bolts and nuts complete.

17.43.1.1 sand cast iron S&S as per IS -1729 3.00 each 671.20 2013.60

G 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms 3.00 each 424.00 1272.00

H 17.71 providing and fixing PTMT liquied soap container 109mm wide 125mm high and 112mm distance from wall of standard shape with bracket of the same material with snap fitting of approved quality and colour weighing not less than 105 gms.

17(A) 18.53A Providing and fixing C.P Brass extencion nipple ( size 15mm x 50mm ) of approved make and quality as per diirection of engineer-in- charge.

B 9.85 providing and fixing bright finished brass casement window fastener with necessary screws etc complete.

C 18.56.1 Providing and fixing PTMT PILLAR COCK OF APPROVED QUALITY AND COLOUR, 15MM NOMINAL BORE 107MM LONG WEIGHING NOT LESS THAN 110 GMS.

D 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore weighing not less than 85 gms.

E 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS stamdards and weighing notless than 690 gms.

18.51.1 15 mm nominal bore 6.00 each 708.40 4250.40

18.49.1 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931

F 18.74 Providing and fixing unplasticised P.V.C. Connection pipe with PTMT NUTS, COLLAR AND BUSH OF APPROVED QUALITY AND COLOUR.

18.74.2 15 mm nominal bore with 45 cm depth. 3.00 each 108.00 324.00

G 17.28 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

H 18.58 providing and fixing PTMT grating of approved quality and colour.

18.58.1.1 100 mm nominal dia. 3.00 each 33.20 99.60

18 18.12 Providing and fixing G.I. Pipe complete with G.I. Fitting including trenching and reffiling etc.

18.12.1 15mm dia nominal bore. 30.00 mtr 197.60 5928.00

18.12.3 25mm dia nominal bore. 40.00 mtr 342.00 13680.00

20 18.48 P/V and placing on terrace (at all floor level)polyethylene water storage tank ,ISI :12701 marked with cover and suitable locking arragement and making necessary holes for inlet, outlet and ove flow pipes. But without fitting and the base support for tank.

21 BCD 2.28 Providing local sand filling etc…do all complete job

22 BCD 11.72 Providing Brick flat soling etc…do all complete job.

23 BCD 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttring -all work 1:2:4 (1cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size)

24 17.3 Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.3.1 W.C pan with ISI marked white solid plastic seat and lid. 2.00 each 5504.30 11008.60

25 17.7A+17.7B Providing and fixing wash basin with C.I. brackets, 15 mm Dia c.p brass single hole basin mixer of approved quality.15mm C.P. brass pillar taps, 32 mm PTMT Waste cupling of standard pattern including painting of fitting and brackets cutting and making good the walls whereever required white viterous china flat back wash basin size 550x400 mm with single 15 mm PTMT pilaar cock

26 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

27 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to ben specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joint with white cement and matching pigments etc., complete

28 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

29 13.98.1 Floor painting with floor enamel paint of approved brand and manufacture of required clour to give an even shade.

qty vid same item no-28 90.38 m2 103.10 9,317.71

30 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

13.79.1 New work (three or more coats)

qty vid same item no-28 90.38 m2 81.20 7,338.49

31 17.32.4 providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing. Rectunglar shape 1500 x 400 mm

32 9.1 providing wood work in frame of door, windows, celerostry windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fasteners shall be paud of seperetaly.

9.1.4 local wood

33 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

34 9.147B Providing and fixing factory made uPVC white colour sliding glazed windoW V ventilators comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimenson , EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall , plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

9.147.B.1 Fixed window / ventilators made of ( small series) frame 47 x 50 mm & mullion 47 x68 mm both having wall thickness of 1.9 +- 0.2 mm and single glazzing bead of appropriate dimension ( Area upto 0.75 sqm)

35 9.62 providing and fixing ISI Marked oxidised M.S Sliding door bolts with nuts and screws etc complete.

36 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

37 BCD 2.8.1 Earth work in excavation in foundation structure etc.. Do all complete job.

38 BCD 2.28 Providing local sand filling etc…do all complete job

39 BCD 11.72 Providing Brick flat soling etc…do all complete job.

40 BCD 4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttring -all work 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)

41 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand)

42 13.17.2 12 mm cement palster 1:4 ( 1 cement : 4 coarse sand ) finished with a floating coat of neat cement cement details of cost for 10 sqm.

43 BCD 6.1.12/1 Brick masonary work in cement mortar (1:4) in foundation complete… etc do all complete job

44 BCD 2.2.1 Earth work in rough excavation banking excaveted earth in layer not exceeding 20 cm in depth breking clods watering rolling each layer wiyh 1/2 tonnes roller or wooden or steel ramers and rolling every third and top most layer with power roller of minimuem 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks, and guide banks or filling up ground depressions lead upto 50 mtr and lift upto 1.5 m.

45 BCD 2.28 Supplying and filling in plinth with local sand and under floors including, watering ramming consolidating and dressing complete.

46 BCD 16.78.2 Construction of granular by providing close graded Material confirming to specification,mixing in a mechanical mix plant at OMC, Carriaged of mixed material by tippers to work site for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achhieve the desired density, complete as per specification and direction of Engineer-in-charge. with material confirming to Grade-II( Size range 53 mm to 0.075 mm ) having CBR Value-25 specification and direction of E/1.

47 11.79 Providing and laying factory made chemferd edge cement concrete paver block of required strength, thickness & size shape made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laidin required Grey colour & pattern over 50mm yhick campacted bade of coarse sand compacting in proper embedding/ laying of enter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamua sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacture's specifications & direction of Engineer-in- charge.

11.79.1 80mm thick C.C. Paver block of M-35 grade with approved colour design and pattern.

11.79.2 80 mm thick c.c paver block of M.S-35 grade with white colour design and paattern

48 BCD 4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttring -all work 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)

49 5.9.1 Centring and shuttring including shuttring, proping etc. and removal of form Foundation, footing, bases of colums etc for mass concrete.

50 Carriage of materials

(ii) Stone chips 63.17 m3 1901.00 120083.98

(iii) Local sand(2P+1K) 56.45 m3 310.47 17527.12

Sub-total 1,332,161.12

51 Add information sign board 1.00 No. 4000.00 4,000.00

51 seniorage of material

Stone chips 63.17 m3 59.54 3,761.07

Local sand 56.45 m3 14.19 801.08

N.P Khagaul N.P Khagaul Nagar vikas Division

Patna Wrastern Area