Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.8 LAccepted-AOC | L1 | Accepted-AOC Low | |
| 2 | L2₹52.6 L+₹3.7 L (7.53%)Rejected-AOC | L2 | Rejected-AOC High | |
| 3 | L2₹79.0 L+₹30.2 L (61.7%)Rejected-AOC | L2 | Rejected-AOC High | |
| 4 | L4₹79.2 L+₹30.3 L (62.0%)Rejected-AOC 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L4 | Rejected-AOC High |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jaiswal, IDSE, CWE Chandimandir
HQ CWE Chanidmandir
CA NO. CWE/CHM-40/2022-23 REPAIR TO ROADS AT VARIOUS UNIT LOCATIONS UNDER THE AREA OF AGE B/R-I OF GE CHANDIMANDIR
2022_MES_551074_1
CWE/CHM-40/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
HQ CWE Chanidmandir
Class C , category a(i) Building and roads or a(v) Road works
8 documents required · 8 mandatory
₹1,000
Yes
GE Chanidmandir
₹1.4 L
Yes
16 Nov 2022
10 Sept 2022
20 Oct 2022
10 Sept 2022
17 Oct 2022
3 Oct 2022
Amount
Preparation of black top surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.complete all as specified and directed
Applying evenly a tack coat conforming to clause 503 of MORT&H specifications for Road & Bridge works (Fifth Rivision) with cationic bituminous emulsion RS1 grade, confirming to IS 8887 (latest edition) @ 2.5Kg/10 Sqm using primer distributer which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed
M&L for Bitumenous concrete (BC) 30 mm thick (consolidated thickness) layer conforming to clause 507 of MORT&H specifications for Road and Bridge work (Fifth Revision) including cost of coarse aggregates, fine aggregates, filler, with 5.5% binder (VG-30) contents by weight of total mix, crushed aggregate of grading 2, anti stripping agent, warm mix additives (quantity, quality and grade as per the approved job mix formula) etc, cleaning and pre-heating of the mineral aggregate, filler & bitumen of specific temperature throughly mixing with binder of specified bitumen content, anti stripping agent, warm mix additives as per mix design in hot mix plant (batch type), carrying the hot mixed materials by means of tipper, trucks or any other approved and and suitable arrangements, laying and hot premixed materials over the prepared surface by means of paver finisher including manual operation as and when required for proper grade, level and camber through rolling with power roller 8 to 10 tonnes smooth wheeled, vibratory and tandem roller with necessary hand packing and pinning to give an even surface including running expense of all plants and machineries, inclusive of proper traffic control during laying to the satisfaction of Engineer-in-charge, required quality control tests at required interval etc complete in all respects complete all as specified and directed
Notes : (i) The contractor shall quote the rate against item considering 5.5 % VG-30 bitumen content. Job Mix formula as per clause No. 505.3.3 of MORT&H specification for road and bridge work (Fifth Revision) for bituminous concrete shall be got designed from NIT/CTL/Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 5.4 % by weight of total mix as per clause 507.2.5 of MoRT&H specifications (Fifth Revision).(ii) The cost of materials, transportation, Job mix formula form lab and testing charges for various tests as required are included in the unit rate quoted by the contractor. (iii) Cost of Filler i.e. rock dust, hydrated lime or cement is deemed to be included in unit rate. (iv) if qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs. 45.00 Per KG and if qty of binder contents is more than the qty as specified is respective items of BOQ no adjustment shall be made. (v) After spreading of mix as per clause 507.4.7 of MoRT&H specification entire surface during the operation shall be rolled with road roller 8-10 tonnes (smooth wheeled) followed with vibratory road roller of 8-10 tonnes static weight, followed by finish rolling with 6 to 8 tonnes smooth wheeled tandem roller as per clause no. 507.4.8 of MoRT&H specifications (Fifth Revision) and the cost of the same shall be deemed to be included in the quoted rate.
Repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm paving bitumen (VG-10) putting in premixed bituminous macadam, well rammed and sealed with binder paving bitumen (VG-30) 9.8 kg per 10sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.
Providing, laying & Compaction of bituminous, macadam (BM)compacted thickness 50 mm conforming to clause 504 of MoRT&H specification for Road and Bridge works (Fifth Revision) using mechanically crushed stone aggeagates and granual material etc of grading II as per Table 500-7 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) premixed with bitumenous binder Bitumen grade VG-30 @3.5% (percentage by weight of total mix) prepared in Batch type Hot Mix Plant transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and allignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density complete all as specified and directed by Engineer-in-charge. Notes : (i) The contractor shall quote the rate against item considering 3.5% VG-30 bitumen content. Mix Design for Bituminous macadam shall be got designed from NIT/CTL/Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 3.4% by weight of total mix as per clause 504.2.4 of MoRT&H specifications (Fifth Revision). (ii) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs. 45.00 Per KG and if qty of binder contents is more than the qty as specified is respective items of BOQ no adjustment shall be made.
Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Monocrystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions etc. complete all as specified and directed
Taking out carefully old road studs (Cat Eye) of any description from existiting road and refixing the same after cleaning in the same or at another location as directed by engr-in -charge complete all as specified and directed.
2 mm thick, white/yellow hot thermoplastic road marking paint, confirming to BS standards 3262 with 20% of glass beads (intermixed) spread and laid by special applicator Machine at desired temperature all as per manufacturer instructions, painting as in strips (continuous or breaking) complete all as specified and directed.
Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
Demolition of cement Concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removal of debris n. exc. 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and as directed.
M&L for 100 mm thick PCC 1:4:8 type D-2 (40 mm graded crushed stone aggs) as in sub base finish even and rough to receive the top layer complete all as specified and as directed.
M&L factory made precast concrete interlocking paver block with grey cement and pigment any shape and size casted in rubber moulds and compacted on vibratory table confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, laid over and including 50mm thick fine sand cushioning and joints filled with fine sand, complete all as specified and directed.
M&L factory made machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size (design approved by GE) casted in rubber moulds and compacted on vibratory table confirming to IS-15658-2006 of 60mm thickness, M-35 Grade over and including 50mm thick sand and cushioning complete all as specified and as directed.
M&L Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in kerbs or mud stops,rounded or chamfered on edges including form work complete all as specified and as directed.
M&L in repairs factory made pre polished pre cast cement concrete M-35, vibro compacted kerbs stone of size 300 x 300 x 100 mm chamfered or bull nosed on one edge with and including necessary earth work and setting in CM 1:4 including necessary excavation not exceeding depth of 15 cm complete all as specified and as directed.
M&L for preparation of new concrete surfaces exc 10 cm in width or girth and appplying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
M&L for preparation of old concrete painted surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Manufacturing, supplying and fixing in repairs retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of equired shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical S-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts and embedding in PCC 1:2:4 type B1etc. complete as per specification and directed.
Manufacturing, supplying and fixing in repairs retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts and embedding in PCC 1:2:4 type B1etc.complete as per specification and directed.
S&F in repair convex mirror minimum 100cm in dia outdoor type, body material- Polycarbonate, acrylic and mirror thickness not less than 3mm for traffic security purpose mounted on 2 mtr long SS pipe Gde 30G fixed with nut bolt and adjustable brackets/clamp system including necessary excavation and embeded in cement concrete type B1 (1:2:4) (20mm graded crushed stone aggregate) complete as per specification and directed.
Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
shree balaji builders
M/S Sulakh Brothers
BAL SINGH & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .