e-NIT No.14 of 2025-26 dt. 15.12.2025

Amount

Supply, Installation, Testing & Commissioning of submersible pump set, panel, delivery pipe, water tanks along with allied electro mechanical works at Ujh Barrage:-Supply, Installation, Testing & Commissioning of single phase, 415 V, 50 Hz submersible motor pump set of capacity 5000 LPH, delivery discharge 50 to 60 m head, 12-15 stage, 1.5-2 HP of reputed make viz. KSB, Crompton, Kirloskar, CRI, LUBI etc. or equivalent make conforming to relevant IS code. The job includes erection of tripod stand and fixing of chain pulley block. Providing/Lowering of submercible pump motor set of above mentioned capacity along with Providing/Lowering of GI/High grade PVC pipes with suitable joints such as flanging/sockets and insulated GI support wire for the pump set upto complete depth of 40-45 m inside the bore. Job also includes Providing/Fitting adapter/reducer nipple suitable to the outlet of the pump and coupler of GI pipe with bend and MS cap of the bore in two halves with nuts, bolts & suitable clamps for holding the complete submercible assembly. Providing of GI/High grade PVC pipes of dia (32-40) mm for approx length 40-45 m. Lower end of the last/bottommost pipe has to be fitted with submersible pump set. Providing of 3 core, (2.5-4) sqmm submersible copper cable of approx length 80 m along with clamps, nuts, bolts & washers of suitable size. The job further includes lowering of submersible pump set into the 125 mm dia borehole along with submersible cable fitted in grooves/or otherwise with fixtures such as rope, clamp, nuts, bolts & washers. Fabrication/Fitting of MS well cap of 7” dia at top of casing pipe. Providing, fitting and installation of starter cum controller Panel of suitable capacity in sheet enclosure outdoor type of genuine make conforming to relevant IS standards for the operation of submersible pump set. Providing/Fitting of 2 core, PVC insulated Aluminum conductor cable 10 sqmm from Main control panel to starter panel, MCCB of suitable capacity and allied electrical accessories. Job includes proper thimbling of all the wiring and then making of electrical connections between Starter cum controller panel, main service line and submersible pump set. Testing and commissioning of submercible pump set after installation. Providing/fitting of Polyethylene water storage tank with threaded lid of capacity 2000 ltrs on terrace of control room, and of capacity 1000 ltrs on terrace of toilet complex, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including Providing/fitting of MS base support for both tanks. Job includes Providing/ Fitting of GI pipes of (20-32) mm nominal outer dia. pipes for 80 m approx length and Providing/ Fitting of GI pipes of (15-25) mm nominal outer dia. pipes for 40 m approx length including external work trenching, refilling etc. Providing & Fitting of all allied parts i.e. Nipples, Tee joint, Elbow, Plug, Ball valves, Union, Tank nipple, Pipe hooks, Taps, Sockets, Reducers, etc. of the suitable size in supply line for the smooth flow of water up to the water tanks. Installation/Fitting 01 No Water filter (Provided by the department) and Installation/Fitting 01 No Water cooler (Provided by the department) along with MS stand including painting & drain pipes duly embedded in PCC. Job also includes Providing and fitting of pipe connections from 2000 ltr water tank on terrace of control room to water filter to water cooler. Also, Providing and fitting of pipe/water connections from 1000 ltr water tank on terrace of toilet complex to toilet complex. Complete job includes labour charges (skilled, semi-skilled), hire charges for the machinery and tools tackles required for the execution of job along with the cost of material and transportation charges, handling charges including of all kind of taxes as applicable.

GANPATI ELECTRICAL AND MECHANICAL WORKS (BID ID -2685588)

BEE AAR ENTERPRISES (BID ID -2686732)