PROVISION OF WATER PROOFING TREATMENT OF ROOF TO ANURADHA BUILDING AT NOFRA COLABA MUMBAI AND PROVISION OF WATER PROOFING TREATMENT OF ROOF TO ALAKHNANDA BUILDING AT NOFRA COLABA MUMBAI AND ADDITION ALTERNATION AND SPECIAL REPAIRS TO SERENDIPITY GYMN

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removed of debris outside MD land complete all as specified and directed by Engr-in-Charge

Roughening/cleaning surfaces of roof with wire brush, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge

M&L for cement concrete 1:2:4 type B- 0 (12.5 mm graded agg) in roof padding concrete, kerbs or mud stops, rounded or chamfered on edges all around at the junction of parapet and the roof slab complete all as specified and directed by Engr-in-Charge

M & L for 10mm thick rendering in cement and sand mortar 1:4 on roof padding concrete surface for levelling course rounded or chamfered on edges, slopping mixed with water WPC @ 2% by weight of cement, finished even & smooth surface without using extra cement complete all as specified & directed. NOTE : WPC shall be measured and paid separately

M&L for protecting the roof with water proofing coating , complete all as specified below and as directed by EIC: (a) Wire brush the surface to remove loose particles & laitance wash with clean water. (b) Complete crack filling & reinstating the damaged portion shall be filled with polymer modified mortar as recommended. (c) Allow the repair surface to cure for 24 hours afterwards wet the surface to a SSD condition (d) Apply one coat of primer by brush and allow to dry for 4 hours (e) Apply 1st coat of water proofing coating over the primed surface by brush (f) On the wet primed surface overlay a open- woven fiber glass mesh min 40 GSM of size 2mm x 2mm and allow it to soak completely (g) Immediately thereafter apply the 2nd coat with a roller to ensure complete coverage of the fibre mesh (h) Apply the 3rd coat after 6 to 8 hours, once the 2nd coat is dry Make : a) Crack filler : Dr. Fixit crack-X Paste, Shaliseal CPM of M/S STP Ltd or its equivalent in choksey. b) Prime Coating : Dr. Fixit Primeseal or its equivalent in M/S STP Ltd choksey. c) Water Proofing Coating : Dr. Fixit Newcoat, Shalicryl 215 of M/s STP Ltd or its equivalent as approved by GE.

M&L for preparing of old/new surfaces of walls/ceiling (of projected Cup boards) , washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers and applying two coats of Rain coat manufactured by Dr Fixit of Piddilte Industries Ltd , M/S STP Ltd or its equivalent, complete all as specified and as directed by Engineer in Charge. (NOTE : Shade shall match the existing paint)

M&L for 20mm thick cement plaster on fair face of brick or concrete surfaces in two layers of 15 mm+5 mm in cement mortar 1:4, each coat shall be mixed with water proofing powder @ 3% of cement or as per manufacturers instuction including finished surfaces even and smooth (without using extra cement) incl taking down old plaster at any position and height incl scaffolding complete all as specified and directed. Note:- (i) Water proofing compound shall be measured separately under respective item. (ii) Water proofing compound shall be approved by the GE.

M&L for preparing surfaces of new plastered surfaces wall/chajja and applying one coat of acrylic exterior primer and apply two coats acrylic emulsion exterior grade (100%) etc all as specified & suggested by the manufacturers at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. .

Supply only integral water proofing compound powder confirming to IS-2645 complete all as specified and as directed by Engineer-in-Charge. Make : Scott, Dr.Fixit , Pidilite

Taking down CI/rain water pipes/PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., including cleaning etc complete all as specified and as directed by Engineer-in-Charge.

S&F 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE. Make : Kisan , Prince , Supreme

S&F 160mm dia PVC (SWR) bends/shoes any radius complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided and removed of debris outside MD land ,complete all as specified and directed.

Material and labour for M-30 cement concrete using 20mm graded stone aggregate as in water retaining structures, walls, slabs etc incl necessary formwork as specified and directed by Engr-in-Charge

Dismantling wrought iron of any description complete all as specified and as directed by Engineer-in-Charge.

M&L for TMT bar 10mm dia and over , cut to length, bet to shape required, including cranking, bending for hooping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia securing with clips complete all as specified and directed.

M&L for removing existing PVC tank setting aside (or lowering if required) for repairs at any location on top of the building including removing existing tank disconnecting all incoming and outgoing connections and reconnecting and re-fixing in position after repair work complete all as specified and directed by Engr-in-Charge for following sizes : Note: Rate quoted is deemed to be inclusive for provision of temporary water connections in quarters by the contractor during work in progress to avoid inconvenience to occupants ,all as directed by Engr-in-Charge.

(a) 2000 ltrs

Supply and fix in repairs PVC tank in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings suitable up to 80mm bore GI pipe all as per existing requirements ,complete all as specified and directed. Make : Sintex , Infra , Polycon.

(a) 2000 Litres

M&L for brick work with sub class B bricks, straight or curved on plan exc 6.0 m mean raduis and built in cement mortar (1:6), incl demolition of old brickwork built in CM , complete all as specified and directed.

Taking up or down steel tubing and connections and removing from store of following sizes, complete all as specified and as directed by Engineer-in-Charge.

(a) 50 mm bore

(b) 15 mm bore

Supply and fix steel water tubing galvanised medium grade (ISI Marked) of following size, with all fitting fixed complete to walls and ceilings or laid in floor/wall/ceiling (in high rise building including scaffolding) ,complete all as specified and directed.

(a) 50 mm bore

(b) 15 mm bore

Dismantling of existing false ceiling of gypsum or cement concrete of any description and in any position not otherwise specifically provided and removed of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

M & L for Metal frame suspended 12.5mm thick gypsum false ceiling including metal perimeter channel of size 0.50mm thick(having one flange of 20mm and another of 30mm and web of 27mm) along with the perimeter of ceiling, screw fix to block/brickwall/partition with the help of nylon sleeves then suspending with metal intermediate channel of size .80mm thick with two equal flanges each 15mm from the soffit at 900mm c/c with help of sofit cleats and Rawl plug etc complete all as specified and directed. (Design & pattern of ceiling shall be as per approved by GE.)

Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls, prerparation of surface and applying two coats of interior emulsion over a coat of primer over layer of smooth Putty finish punning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement). .

Material & Labour for preparation of surface of ceiling and applying two coats of interior emulsion paint over a coat of primer over layer of smooth Putty finish punning 3mm thick strictly as per manufacturer's instruction with smooth roller finish ,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement). .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed and specified.

M&L for coloured vitrified tiles(light colour of size (600X600)mm, 7 to 8mm thk laid in flooring with & including 5mm thk adhesive of Ferrouscrete (FERRO -1122)/Fevimate XL Pidilite/ Gold star of bal endura or equivalent including necessary roughening of existing PCC floring & levelling the floor if required grouting the joints complete all as specified and directed. Make - Somany, Kajaria, Orientbell

S&F for Exercise/ Gymnasium Flooring mat with high density EVA or Rigid foam (density of Foam 30-50 kg/cum), free from toxic phthalate, Non Skid interlocking mat finish of 10-12mm thick etc. complete all as specified and directed by Engineer-in-Charge. (Design, colour & pattern of Gymnastic mat shall be as per approved by GE only.)

M&L for opening gaps between glass partition & filling the joints with water repellent compound etc complete all as specified and as directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring including cutting chases on wall complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC conduits, ISI marked with accessories concealed in wall/ceiling/truss etc with metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :- Make of wire:- Finolex / Havells / Polycab Make of conduit:- Pressfit / Supreme/ Precision

(a) One light point controlled by one switch SP one way.

(b) One 3 pin socket outlet 5Amps on same board with other switches.

(c) One 3 pin socket outlet 5Amps on independant board.

M&L for point wiring including cutting chases on wall complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC conduits, ISI marked with accessories concealed in wall/ceiling/truss etc with metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of wire:- Finolex / Havells / Polycab Make of conduit:- Pressfit / Supreme/ Precision

S&F Modular Switch , 6 Amp, One way, 1 module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular Switch , 16 Amp, One way, 1 module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular Socket, 6 Amps, 2/3 pin combined 2 module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular Socket, 6/16 Amps, 2/3 pin combined 2 module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

S&F Modular white cover plate with Frame 3 Module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular white cover plate with Frame 6 Module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular white cover plate with Frame 8 Module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular white cover plate with Frame 12 Module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular metal flush box 3 module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular metal flush box 6 module, ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular metal flush box 8 module , ISI marked. Make : Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

S&F Modular metal flush box 12 module , ISI marked. Make- Legrand (Arteor) / Schneider (zencelo) / Anchor (Ave)

Supply & fix in repair MCB DB, TPN 12 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming) MAKE: Legrand, Schneider, GE (b) MCB TP 63 Amps, 10KA - 05 Nos (C Series) (Outgoing) MAKE: Legrand, Schneider, GE (c) MCB SP 40 Amps, 10KA - 16 Nos (C Series) (Outgoing) MAKE: Legrand, Schneider, GE

S & F in repair Circular/ rectangle Recess mounting LED downlight 06 watt (WH/NW) suitable for exising cut out dia of Old downlight complete all as specified & as directed by Engr-in-Charge. Make- Jaquar/ Philips/Havells

S&F in repair baton integral aluminium body with white acrylic cover of lumen output 1800-2400 Lux, 3000 to 6500 Kelvin with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified. Make : Make- Jaquar/ Philips/ Havells

S&F in repair baton integral aluminium body with white acrylic cover of lumen output 1000-1200 Lux, 3000 to 6500 Kelvin with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified. Make : Make- Jaquar/ Philips/ Havells

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Supply and fixing, in repair Submain wiring including cutting chases on wall with proper colour coding , 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC conduits of suitable size, ISI marked, including 1 single core cable with stranded copper conductor of size 4.0 Sqmm (green colour) for earthing. Make of cable: Plaza/ Havelles/ Finolex/ Polycab Note : 2 runs of 4 Sqmm cable, 1 run of PVC conduits and 1 run of 4.0 Sqmm earth cable shall be measured as 1 Run. Make of wire:- Finolex / Havells / Polycab Make of conduit:- Pressfit / Supreme/ Precision

Supply and fixing, in repair Submain wiring including cutting chases on wall with proper colour coding , 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC conduits of suitable size, ISI marked, including 1 single core cable with stranded copper conductor of size 10.0 Sqmm (green colour) for earthing. Make of cable: Plaza/ Havelles/ Finolex/ Polycab Note : 2 runs of 10 Sqmm cable, 1 run of PVC conduits and 1 run of 10 Sqmm earth cable shall be measured as 1 Run. Make of wire:- Finolex / Havells / Polycab Make of conduit:- Pressfit / Supreme/ Precision

Supply and fixing LED smart strip light (24V DC) of 40 watt in RGB warm white, IP 33 rated (indoor applications) alongwith suitable size of driver with different colours in 5 mtr roll complete all as specified and directed. Make- Havells/ Philips/ Jaquar

Supply and fixing LED wall section light of 5 watts capacity in RGB colour, IP 65 rated alongwith suitable size of driver with different colours with aluminium die cast , frosted PC diffuser, anti glare, AC supply 90V-260V complete all as specified and as directed by Engineer-in-Charge. Make- Havells/ Philips/ Jaquar

S&F Rigid non-metallic PVC casing caping/conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of medium grade, ISI mark, 25mm width double lock, for cable TV, internet, telephone cable complete all as specified and as directed by Engineer-in-Charge.

Vandan Enterprises

SHREE JAGDISH FURNITURE CO.