HT/LT Improvement and Stabilization of Dedicated DT Sub-Stations of PCR Batmaloo fed from F1 Exhibition - ESD-Hazuribagh, ED-2nd (DC Work - PCR)

Amount

Supply and Erection of ST Pole 11 mtr. long (ST-410 SP56) with Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached including loading from factory unit, its carriage and unloading upto site (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply and Erection of ST Pole 9 mtr. long (ST-410 SP33) with Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached including loading from factory unit, its carriage and unloading upto site (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply and Erection of ST Pole 8 mtr. long (ST-410 SP15) with Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached including loading from factory unit, its carriage and unloading upto site (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply, Laying, Testing and Commissioning of 0.1 ACSR Conductor

Supply, Laying, Testing and Commissioning of 0.05 ACSR Conductor

Providing, Fabrication and Fixing of Galvanized Channel Iron Cross Arm (75x40x6mm) as per drawing configuration CE/P&P/Drg/202211KVL0011 (1296 mm and 950 mm long GI Channel per pole for achieving Triangular Configuration of ACSR)

Providing, Fabrication and Fixing of Galvanized Angle Iron Brace Arm (65x65x6mm) as per drawing configuration CE/P&P/Drg/202211KVL0011 (1260 mm and 712 mm long GI Angle per pole for achieving Triangular Configuration of ACSR)

Galvanized Channel Iron Cross Arm 8.5'/9’ long 13 No.(75x40x6mm) including channel for both GO switch handle support and LT fuse set fuse (per site requirement)

Supply, Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 kV, 10 kA, LA with polymer housing, Stn. Type

Supply, Installation, Testing and Commissioning of 11 kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type including pipe, handle, pad lock etc including its earthing using 25x3 mm strip (strictly as per drawing attached)

Supply, Installation, Testing and Commissioning of 11 kV Horn Gap Fuse Set 3 Phase 200 Amp (strictly as per drawing attached)

Providing and Fixing of Galvanized Nuts and Bolts of sorts

Providing and Fixing of LT fuse set comprising of requisite aluminium bus bar mounted on LT polymer insulator assembled on galvanized channel iron frame including necessary clamps (Strictly as per drawing attached)

Providing and Fixing of 11 kV Polymer Pin Insulator 12 kV, 5 kN, Lighting Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm

Providing and Fixing of 11 kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm with fittings

Providing and Fixing of Pole Collars / Back Clamp of 50x8mm galvanized Flat Iron duly fabricated

Providing and Fixing of LT Shackle Insulators 16 KN 100 mm

Providing and Fixing of GI Muki Clamp (Complete) of 50x8 mm galvanized flat iron having end inner dia 18 mm for Shackle Insulators suitable for ST Pole with back clamp and galvanized nuts and bolts

Providing and Fixing of Wedge Connectors / PG Clamps

Providing and Fixing of Aluminium Thimbles 400 mm sq

Providing and Fixing of 11 KV Danger Plate with Clamp

Providing and Fixing of Anticlimbing Device using GI Barbed wire with end Clamps (2 kg Barbed wire per job/pole with 2 GI clamps with GI nuts/bolts and washers)

Providing and Fixing of Earthing of ST Poles 11/9/8 mtr long using GI Pipe 40 mm GI Rod 20 mm 2.5 mtr long through GI Strip.

Providing and Laying of Cement Bottoming of ST Poles 11 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.6 cum/pole)

Providing and Laying of Cement Bottoming of ST Poles 9 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.5 cum/pole)

Providing and Laying of Cement Bottoming of ST Poles 8 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.45 cum/pole)

Painting of ST Poles 11/9/8 mtr long with 1 coat of Red Oxide and 2 coats of Aluminium Paint

Dismantling and Re-laying of 35 mm sq 11 KV HT AB Cable

Providing and Fixing of Pole Bracket along with eye Hooks and Suspension/ dead end tension Clamps for laying 11 kV AB cable) - (1 Set = 1 pole bracket + Eye hook+ Dead end Tension clamp of AB cable)

Dismantling and Relaying of 0.1 ACSR Conductor

Dismantling and Relaying of 0.05 ACSR Conductor

Dismantling of 0.1/0.05 ACSR Conductor

Dismantling of old ST Pole

Dismantling of old PCC Pole (with proper disposal)

Dismantling of old Wooden Pole

Loading/Carriage and Unloading Charges for all Returnable/Dismantled Materials to Divisional Stores at Bemina

Providing and Fixing of LT Spacers

Shifting of Consumer Meter (1 phase/ 3 phase) from existing pole to New Pole (including connectioning & proper GI strip clamping arrangement)

Providing/Submission of Both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pic per page)

UBAID SUPPLIERS AND CONTRACTORS

M/S QADRI ELECTRICALS