SPECIAL REPAIR TO ROOF TREATMENT AND AC SHEET FOR BLDG NO P-20 AND CERTAIN OTHER SANCTIONED WORKS AT MIL STN NOWGONG (BKD) UNDER AGE B/R-I AT GE JHANSI

Amount

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and directed.

Surface exacavtion n. exc 30 cm deep and avg 15 cm deep and getting out in any type of soil complete all as specified and directed.

M & L for removing of surplus excavated soil to a distance n.exc 50mtr and deposited where directed at a level n.exc 1.5mtr above the starting point complete all as specified and directed.

M&L for plain cement concrete type C2 1:3:6 (using 40mm graded agg) as in post hole etc all as specified and as directed by Engr-in-Charge

M&L Hardcore (Broken stone) of guage exc 63mm but n exc. deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

M&L for RCC nominal mix Type A1 1:1.5:3 (20 mm stone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for mild steel deformed TMT bars 5 mm to 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Taking down cement/ lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces, finished the surface even and fair mixed with WPC @ 2% by weight of cement complete all as specified and directed. Note- Supply only WPC shall be measured and paid separately.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall, finished even and fair complete all as specified and directed.

M& L 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm garded stone agg) in sub base of flooring/ hard standing complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Hard standing laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed. Note : Forming and filling of expansion joints shall be measured and paid seperately.

M & L for forming expansion joint with 30x10mm filled with mixture of 1:3 of hot bitumen and sand including form work complete all as specified and directed by Engineer-in-charge

Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

S & F mild steel work in tubular trusses (either circular or square)including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-charge

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

Taking down/removing existing roof treatment over roof slab incl roughening and wire brushing the surface to remove the loose concrete, dust and cleaning the surface complete all as specified and directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal phase of grooves with cement mortal 1:3 complete all as specified and directed.

M&L for rendering 10mm thick on top of roof in CM 1:4 incl mixed with WPC complete all as specified and directed. (Supply only Water proofing compound shall be paid separately).

Prepration of existing surface and m&l of water proofing treatment to roof slab with APP based modified polymeric membrane having thickness 3 mm and weight not less than 3 Kg/Sqm reinforced with polyster non wove fabric ( wt not less then 150 gms) with 100 mm overlap laid as per manufacturer’s instructions,laid on primer surface with bituminous primer 0.4kg /sqm apply with torch application Apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membran all edges to be taken up to vertical wall of 20 cm height and inserted into the vertical wall and conceiled the joint with bitumen sealent complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound ISI Marked.

S&F 18/19 mm thick Block Board garde 1 quality exterior garde Decorative type both face for partiotion of self etc complete all as specified and as directed.

S&F 18/19 mm thick pre laminated particle board one side decorative and other side white lamination fixed with 19 mm wide and 6mm thick first class hard wood beading all round for shutter cupboard complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over a coat of white wash complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7mm thick (square rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm in floors, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make : Somani / Kajaria / Orient.

M&L for glazed ceramic coloured tiles of size 300x450x8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 10mm thick cement plaster in CM 1:4 and finished the surface of plaster rough complete all as specified and directed. Make : Somani / Kajaria / Orient.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm dia, fixed complete all as specified and directed.

All as per item No 37 here-in-before but 20 mm dia .

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified and directed.

All as per item No 40 here-in-above but not exc 1.5 sqm each.

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed. Make : Syntex / Rajshree Plastiwood

S & F factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , supply and fixing in the frame complete all as specified and directed. Make : Syntex / Rajshree Plastiwood

S&F 100mm long butt hinges, extruded alluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21 complete all as specified and directed. Make : Ashish, Classic

S&F 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed. Make : Ashish, Classic

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed. Make : Ashish, Classic

S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed. Make : Ashish, Classic

M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.

S&F of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.

S&F 1st quality vitreous china ware European type WC with "P" or "S" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as specified and directed. Make : Hindware / Cera / Jaquar / Parryware.

S&F 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as specified and directed. Make : Hindware (Cat No - 60002) / Cera (Cat No - 5001)/Parryware (Cat No - C0575).

S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed

S&F PVC connections of 15mm size with PTMT nuts of 450mm long complete all as specified and directed.

S&F in long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed. Make: Hindware/ Cera/ Parryware / Prayag / Pearl.

S&F pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Hindware/ Cera/ Prayag / Pearl /Parryware.

S&F angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as specified and directed. Make : Hindware/ Cera/ Parryware / Prayag / Pearl.

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. Make : Supreme / Prince / Kisan

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed. Make : Supreme / Prince / Kisan

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Make : Supreme / Prince / Kisan

S & F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. Make : Supreme / Prince / Kisan

All as per item No 62 here-in-before but 75mm bore. Make : Supreme / Prince / Kisan

S&F PVC (SWR) vent cowl suitable for 75mm bore of pipe complete all as specified and directed. Make : Supreme / Prince / Kisan

S&F 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal with access door complete all as specified and directed. Make : Supreme / Prince / Kisan

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.

M/s JS Constructions

Shri Tirupati Associates