Construction of Battery Room for the Department of Information Technology at New University Campus, Jammu

Amount

Earth work in excavation in all kinds of soil in foundation trenches pits and bulk evacuation including stacking soil neatly away from the edges, filling back by the sides of foundations in plinth in 150mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth within University Campus/outside University Campus as directed by the Engineer Incharge.

Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 grade crushed stone aggregate 40mm nominal sizes) in foundation and under flooring including machine mixing, finishing, consolidation, curing and form work complete.

Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 grade crushed stone aggregate 20mm nominal sizes) in foundation and plinth including machine mixing, finishing, consolidation, curing and form work etc. complete.

P&L in position specified grade of RCC 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 12.5/20mm nominal size) in foundation, plinth and in superstructure upto floor V level including cost of centering, shuttering upto Floor V Level but excluding cost of reinforcement in:- Columns, Pillars, Posts & struts, Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, lintels, bands, plain window cills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All RCC works upto floor V level complete in all respects. Nothing extra shall be paid for any additional height of formwork.

Providing steel thermo mechanically treated bars conforming to IS:45612000 reinforcement for all RCC work including bending, binding and placing in position complete including cost of cold twisted steel reinforcement and binding with 18-20 gauge, soft drawn concealed steel binding wire complete as per specifications and drawings(upto height of floor V level).

Brick work with 2nd class bricks of class designation 75 in foundation, plinth & in superstructure in cement mortar 1:6 (1 cement : 6 coarse sand). All work upto floor V level.

Filling in plinth with sand under floors including watering, ramming, dressing and consolidation in layers not more than 200mm thickness. Complete in all respects.

10-15mm thick cement plaster 1:4 (1 cement; 4 coarse sand) in single coat on rough/fair side including making grooves wherever required, cost of form work/scaffolding. All work upto floor V level.

6mm-10mm cement plaster 1:3 (1 cement :3 fine Sand) to ceiling including cost of centering, shuttering, scaffolding etc. as required upto height of floor V level.

Providing first class Sal wood in frames of doors, windows, clearstory windows and similar work and fixed in positions including P&F of Sal wood ornamental beading at all sides of frames including applying two coats of wood preservative to all sides of the frame as per the satisfaction of Engineer-in-Charge at site before fixing and also including applying a priming coat of wood primer and then two or more coats with synthetic enamel paint of required shade and finish complete. including providing 40mmx5mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying 40mm thick cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including finishing with a floating coat of neat cement slurry

Finishing plastered wall surface (Interior) with wall care putty (two or more coats) giving an even and smooth surface including cost of the wall care putty and labour complete upto height of floor V level.

Providing angular fillets 75mmx75mm cement concrete 1:2:4 (1cement : 2coarse sand : 4crushed stone aggregate 20mm nominal size).

Providing and fixing M.S. grills of required pattern in wooden window frames with M.S flats, square bars etc. with steel screws, including applying priming coat with metal primer and then two or more coats with synthetic enamel paint of approved colour, brand and manufacture to give an even shade.

Providing and Laying C/Concrete 1:5:10 [1 cement :5 coarse sand :10 graded brick aggregates 40mm nominal size] under flooring including machine mixing, finishing, consolidation etc. complete.

Providing plinth protection 50mm thick cement concrete 1:3:6 (1 cement ; 3 sand: 6 graded crushed stone aggregate 20mm nominal size over a base of dry 75mm thick brick aggregate 40mm nominal size) well rammed, consolidated and grouted with sand complete.

Providing & fixing ISI marked flush door shutters non decorative type, core block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters -35mm thick including ISI marked powder coated MS butt hinges with necessary screws, including applying a priming coat of wood primer and then two or more coats of synthetic enamel paint of approved brand and manufacture.

P/F of 35mm thick 2nd Class Teak wood glazed shutter for window/clerestory windows as per required drawing, design and specification with necessary M.S butt hinges with screws including providing and fixing of 4 mm thick glass panes of approved quality with necessary wooden beading including applying priming coat with ready mixed wood primer and then two or more coats with synthetic enamel paint of approved colour, brand and manufacture to give an even shade.

P&F aluminum alloy fabricated doors and windows Handles anodized to a light natural mat or satin finished or dyed with screws etc. complete (Hari Make, superior quality): 125mm

P&F aluminum barrel Tower bolts with barrel and bolts of extruded sections of aluminum alloys, bolts and barrel anodized (Hari Make, superior quality) with screw etc. complete 150mmx10mm

P&F mild steel bright finished eye hooks 6” long of superior quality with screws.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall /ceiling /slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture upto height of floor V level.

Finishing exterior plastered surface (two or more coats) with exterior Emulsion (Apex/Excel) over and including preparation of surface with two or more coats of wall care putty and then applying a priming coat of cement primer. Complete job upto the height of floor V level & Nothing extra shall be paid on account of scaffolding/formwork etc.

Making khurras 450mmx450mm with average minimum thickness of 50mm cement concrete 1:2:4 (1cement:2 sand:4 graded crushed stone aggregate 20mm nominal size) finished with 12mm cement plaster 1:3 (1cement:3sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete.

100mm thick (average) mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35kg / cum/of earth gobri leeping with mix 1:1 (1clay:1cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1cement:3sand) mixed with 2% of integral water proofing compound by weight of cement and also flush pointing the top surface with cement mortar 1:3 and finished neat.

P&F of ISI marked mild steel Aluminum sliding door bolts for use with nuts and screws complete. 300x16mm

P&F aluminum hanging floor Door Stopper ISI marked anodized (anodic coating not less than grade Ac 10 as per IS: 1868) transparent or dyed to required color or shade with necessary screws etc. complete with twin rubber stopper.

MOHD TARIQ LONE