REPAIRS TO ROADS, ROAD BERMS, PAINTING AND ROAD FURNITURE AT SPORTS COMPLEX, SMQ AREA AND OMQ AREA OF SUBROTO PARK UNDER GE (AF) SUBROTO PARK , DELHI CANTT-10

Amount

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M & L for applying evenly a priming/ tack coat with bituminous primer @ 5 Kg/ 10 Sqm using paving bitumen complete all as specified and directed.

M & L for bituminous premix asphaltic semi dense asphaltic concrete 30mm consolidated thickness with 5.5% (minimum) binder content of VG-30 by weight of total mix, laid by mechanical paver, rolled and compacted to required camber and gradient complete all as specified and directed.

Repair to potholes any depth, Not exc. 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, using Paving Bitumen VG-30, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.

M & L for premix bituminous macadam laid with 4% (minimum) binder content of VG-30 by weight of total mix, rolled and compacted to required camber and gradient (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for cleaning and preparing the road surface and marking with reflective thermoplastic white/yellow road marking paint conforming to clause 803 of MORTH specifications, laid through road marking machine in 2.5 mm thick layer of high quality reflective thermoplastic road marking material using 5 Kg material per square meter by incorporating the white glass beads 250 gms/Sqm for reflectivity for lines, dashes, arrows,zebra marking etc complete all as specified and directed Note :- (i) Unit rate quoted by the contractor include for provision of red signals to keep off traffic from green work, cleaning road surface and working during odd hours when traffic is light. (ii) The line marking shall stand out boldly and solidly without showing signs of scratch marks or surfaces underneath, if necessary, the surface shall be remarked after removal of existing treatment until the desired result is obtained.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc. complete all as specified and directed.

Demolition of plain cement/Asphaltic concrete in ground floors n. exc. 15 cm thickness (below or above GL) ,unreinforced and removing debries out side of MoD land complete all as specified and directed.

M & L for 75 mm thick PCC (Plain Cement concrete) type D- 2, 1:4:8 (40mm graded aggregate) as in sub-base of floors and paving complete all as specified and directed.

M& L for 60 mm thick, M-35 grade machine pressed rubber form moulded precast interlocking concrete coloured (Red/yellow) paver block ,in any shape and size with grey cement and pigment as approved confirming to IS 15658-2021 complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for precast cement concrete type B1(1:2:4) (20 mm graded ) as in kerb stone, with plain fair faces, including chamfers, weatherings, throating etc. and setting in Cement mortar (1:4) complete with joints to match complete all as specified and directed.

M&L for two coats of synthetic enamel paint on concrete surfaces in different tint of any description over 10cm width or girth over a coat of primer including preparation of new surfaces , not otherwise described complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old concrete surfaces in different tint of any description over 10cm width or girth over a coat of primer including preparation of old surfaces , not otherwise described complete all as specified and directed.

M&L for Chequered cement concrete coloured tiles with glossy finished 22-25mm confirming to IS -1237 (rubber form moulded) any size in floors etc, set, jointed & pointed with pigment cement & pigments to match the colour and fixed with cement slurry 20mm thick bedding layer of cement sand mortar (1:6) complete all as specified and directed.

Demolition of brick work or stone / boulders masonry built in cement mortar or cement lime mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with old size brick, sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc including raking out joints , hacking for key and scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth without using extra cement complete all as specified and directed.

M & L for Preparing plastered or unplastered new surfaces of walls and applying two coats of weather proof emulsion paint complete all as specified and directed.

S&F in repair speed bump (speed breaker) made of heavy duty ABS with high resistance wear & tear properties, US stabilized black and yellow coloured, high reflective reflector having length 500mm width 400 mm and height 75 mm coloured fixed on ground with necessary bolts as recommended by manufacturer and filled with PCC 1:2:4 (using 12.5mm graded stone aggregate) on hollow space of speed bump complete all as specified and directed

M&L for preparing of old/new black top road surfaces and writing cautionary letter like STOP, LOOK, GO etc. in capital letter with applying one coat of retro reflective thermoplastic road marking paint with thickness as per (IRC-35 : 1997). Size of letter will be 30 cm in wide, 150 cm in length and 80 cm in width. Writing material shall be confirming to MOST ( Ministry of surface transport) specification 803.4, vol-III as laid down in the specification for road and bridge work (third revision) complete all as specified and as directed

S&F Convex mirror 100cm of polycarbonate material on road junction and corners with adjustable brackets complete all as specified and directed .

Ashish Sehgal and Co.

M/S Rohit Enterprises

R K GOEL ABHEY KUMAR JAIN