CONSERVATION AND REPAIR TO SHRI KEDARLING (JYOTIBA) TEMPLE, MOUZE. WADI-RATNAGIRI, TAL. PANHALA, DIST. KOLHAPUR

Amount

Removal of plants/ficus grown by pulling out roots system embedded in masnory,cutting stem and application of high /gur/ lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide'Glycel'(iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete

Removing G.I. or A.C. sheet roofing including purlines, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Gently cleaning the surface of stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray fine mist along the stone surface without over wetting followed up by gentle brushing with soft nylon brushes and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc.as specified. Gentle surface cleaning may include using water misting and mild pH balanced surfactants as specified for indicated areas to remove the surfce dirt, grit accretions by means of water misting and cleaning etc. complete as directed by the Engineer in Charge.(The rate is inclusive of all materials & labours involved except scaffolding).

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/or applying chemical and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose. (2)The payment will be made once only for execution of all items for such works.

Providing Soil Bag Support to the monument with contractor´s soil in proper layers carefully as directed by Engineer in-charge including filling, tying and conveying the bags, removing the soil bags after work up to a distance of 50 meter beyond the monument area and cleaning the site etc.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means

Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m) By Manual Means

Conveying the excavated material, debris of brick or stone masonry, RCC, slab, waterproofing, stone members/ materials, cement/ lime concrete, tiles/marbles/ stone slab/ brick bat coba, etc, upto 5 km, away from the site and cleaning the site properly.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.

Applying breathable, non-reactive, antifungal, and water repellent Silane/Siloxane chemical as approved by Archaeological Survey of India / Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical: 12 Parts of Turpentine oil), on the existing Basalt stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-Charge. (The rate is inclusive of all materials & labours involved except scaffolding.)

Applying two or more coats of Ethyl Silicate chemical as approved by Archaeological Survey of India / Engineer-in-Charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by the stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in-Charge. (The rate is inclusive of all materials & labours involved except scaffolding.)

Providing anti-termite treatment to the sides of flooring in existing buildings as per I.S. 6313 (Part-II). This involves drilling 6mm holes at 30cm center to center, injecting 1% chlorodane emulsion concentrate at 50ml per hole, and sealing, with a 2-year guarantee.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorpyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing general pest control services to the building tocontrol the nuisance of cockroaches, lizards, pin borads and other insects with 4 operations in a year and monthly checkup.

Providing and filling in the foundation with excavated material of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Numbering the monument elements in proper order before lowering down with approved colour and shade as directed by Engineer in-charge, including ladder, scaffolding etc. complete.

Lowering down carefully existing stone masonry of the monument manually in proper order including shifting the stone elements up to a distance of 50 meter beyond the monument area and stacking them as directed by Engineer in-charge, removing building rubbish and cleaning the site etc. complete.

Steel-rod stitching incracked stone patties, beam, and lintels. Providing and fixing stainless steel rods of 90cms length of which 15cm on either side and cold bending at 90degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with cement and aradite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel charge per hole.steel rod charges are counted per kg.Holes with 6mm, 8mm, 10mm or 12mm dia.as per requirement of position.

Dutchmen repairs of stone sections that severely distresses, reinstallation of new Black basalt stone piece to match existing stone as a facia of minimum 75mm depth of similar colour and texture and size. The size of the atone piece would be approx of 150 x 300 mm. The fixing of the new stone would employ mortar grout and anchoring technique after neatly cutting out damaged stone profile using one of the following techniques: a) stainless stell pins of 6mm dia threaded at end b) Helifix treatment.

Providing dry rubble stone soling in 15cm to 20cms. Layer includinghand packing and compacting complete

Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete.

Providing and fixing Stone Paving, Second Sort in lime mortar 1:1½, with size of stone 0.60 cm. x 0.45 cm. x 0.20 cm., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be not finely chisel-dressed on the surface and the course to be of prescribed width, true for top 25 mm. (1″), the joints running true, the stones to be laid with joints not exceeding 8 mm. (5/16″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing and fixing Stone Paving, Third Sort in lime mortar 1:1½, with size of stone 0.60 cm. x 0.45 cm. x 0.20 cm., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be rough point chisel dressed on the surface and the course to be of prescribed width, true for top 12.5 mm. (½″), the joints running true, the stones to be laid with joints not exceeding 10 mm. (⅜″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Un-coursed Rubble Masonry of trap / granite stones in lime mortar 1:1½, in superstructure as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking off weak corners and edges with the masons hammer, the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Coursed Rubble Masonry Second Sort of trap / granite stones in lime mortar 1:1½, size of stone (45 cm. x 30 cm. x 20 cm.) As Per detailed specifications and drawings or as directed including the stones shall be laid in horizontal course not less than 15 cm. (6″) in height, the stones in each course shall be of equal height and all course of the same height, unless otherwise specified, the face stone to be squared on all joints and beds, the beds to be hammered or chisel-dressed , true and square at least 7.5 cm (3″) back from the face, the face of the stones to be hammered and bushing not to be project more than 3.8 cm. (1½″), all stones to be set full in mortar, all side joints shall be vertical and beds horizontal and not joints shall be more than 10 mm., the through stones shall be inserted 5 and 6 feet apart in every course, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete

Providing Block In Course Stone Steps of trap / granite stones in lime mortar 1:1½ with size of stone 0.60m. x 0.40 m. x 0.21 m). as per detailed specifications and drawings or as directed the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall be rough-tooled on exposed surface, holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing 10 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all joints in masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg Jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or jute) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing 12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1½:1 in superstructure, as per detailed specifications and drawings or as directed including all joints in masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing and applying integral fine coat, with addition of coloured pigments, as paint to the plain lime stucco plaster, in two layers, including scaffolding, curing, all leads and lifts etc. complete. 1) The 1st coat to be laid is a mixture of fine lime and white - washing lime in 2 : 1 proportion, made smooth with wooden rubbers, and very lightly beaten. The finishing coat, consisting of fine lime and white - washing lime, mixed with the appropriate pigment in 1 : 2 : 1 proportion is to be applied and well - polished with trowels.

Providing Fine Coat Of Lime over rough cast plaster in superstructure, as per detailed specifications and drawings or as directed including the finishing coat is to be applied over rough cast plaster and well-polished with trowel, preparing the lime mortar, scaffolding and watering complete.

Providing and fixing stone flooring, First Sort in lime mortar 1:1, with size of stone (0.60 x 0.45 x 0.15m) thickness as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing and applying Ornamental (kalakusariche velbuttiche) lime plaster in 1:3 ratio for any floor average 20mm to 40 mm thickness , as per instruction with sieving sand and making surface. Making plywood firma and providing old textures ornamental plaster.

Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 with for Deepmal Octagonal / Circular / trapezoidal in shape as per the site requirement of size of stone ranging from [0.35 x 0.35 x 0.35Meter] in superstructure (deeepmal ) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 with for Deepmal coping/capstone stone Octagonal / Circular / trapezoidal in shape as per the site requirement of size of stone ranging from [0.40 x 0.40 x 0.82 Meter] in superstructure (deeepmal ) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 with for Deepholders of Deepmal in any shape as per the site requirement of size ranging [0.60 x 0.76 x 0.30 m meter] in superstructure a as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 with for Kund stones in shape of size ranging [1.20M X 0.60M X 0.30M] in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (0.60 x 0.45 x 0.23)M.M. cm. in Wall stone as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (2.6 x 0.5 x 0.5)M. in beams/columns as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (0.9 x 0.6 x 0.2)M. in Chajja-overhanging eaves as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (0.60 x 0.45x 0.23)M. in Wall stone as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (0.6 x 0.6x 0.45)M. in Coping stone/cornice as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone ((0.70 x 0.70 x 0.30)M. in plinth stone as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (0.60 x 0.60x 0.60 )M. in Talkhada as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (1.5 x 0.60 x 0.3 )M. Roof stone as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing & applying Polyurethane based wood coating to the new or old work in two coats including knotting, preparing the surface by scrapping, scaffolding etc. complete as per manufacturers specifications and as directed.

Providing and fixing Teak Wood solid Door First Class (1.32 m. x 2.10 m.) with frame 100 mm. x 100 mm section and fully panelled shutters double leaf as per detailed specifications and drawings or as directed including the best quality and well-seasoned Indian teak, to be properly framed and mortised together, the head and stills being provided with horns 15 cm long, all parts set in masonry to be well coated with boiling coal tar, the styles, top, bottom, lock and frieze rails 150 mm (1½″) thick with fitted moulding or as specified, the panels 35 mm (1¼″) thick to be raised, feather-tongued in to styles and rails with beaded edges on both sides, each leaf to be hung with aluminium metal strap of 50x3mm. with brass screws, furnished with pair of aldrops 16mm. diameter & 300 mm. length, pair of patent handles 150 mm., pair of tower bolts 10 mm. dia. & 250 mm. length, tower bolt 10 mm. dia. & 200 mm. length, and pair of hooks & eyes 200 mm. all of brass etc. complete.

Teakwood in structural members : Providing and fixing Ist quality (Superior Quality) Teakwood in structural members like columns including removing damage/decayed wood members,fixing stainless steel screws, cutting, sawing,making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete. For wood size = 12" x 12 "

Teakwood in structural members : Providing and fixing Ist quality (Superior Quality) Teakwood in structural members like beams including removing damage/decayed wood members,fixing stainless steel screws, cutting, sawing,making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete. For wood size = 9"x 9"

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

Providing, laying and fixing P.V.C.pipe of 110mm.dia.with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 Kilogram with lid and frame fixed in cement concrete.

Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete.

Lead sheet of 400mm to 900mm width : Providing and laying lead sheet of 400mm to 900mm width and upto 1mm thick including proper fixing jointing, soldering joints with lead rod , including scaffolding if necessary and as directed by in charge etc. complete

Providing and fixing Cast Iron safety railing as per design by Architect for staircases, atrium, plinth steps, ramp etc. of 75 kg weight per Sq.M. including black duco finish with PU Coating. This item also includes providing and fixing top wooden handrail on railing as per design by Architect.

Galvanised iron sheet 0.8 mm (22 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth up to 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed.

Providing and fixing Country clay (Half-round) Single-tiled Roof over corrugated galvanised iron sheet roofing as per detailed specifications and drawings or as directed including the roof covering to be consists of a double layer sound, well-burnt half-round country tiles of uniform colour and size, free from flaws and defects, the tile to ring clearly when struck together, they should be so turned as to allow of an overlap of at least 75 mm. (3″) and should be carefully and truly laid at right angles to the eaves, the tiles must about closely at the ridge, the tiles shall be protected by wind ties of iron bar secured by bolts to the corrugated sheet below, scaffolding etc. complete. (excluding corrugated Galvanised Iron sheet.)

Providing and fixing teak wood railing of 1.05 m height in the temple mandap as per detailed drawings with top and bottom rails of size 0.075 x 0.15 m and balusters of 0.05 x 0.05m, each supported bythe vertical newel posts of 0.075 x 0.15 x 0.85 m with newel cap of size 0.1 x 0.1m as directed by the engineer, removing the existing railing members and fixtures, including french polishing, and hardware and joinery etc. complete. It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Department’s FDCML

Teakwood in structural members : Providing and fixing Ist quality (Superior Quality) Teakwood in structural members like Rafters of size (6" x 4" x 9') etc. including removing damage/decayed wood members,fixing stainless steel screws, cutting, sawing,making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete. For wood size = 6" x 7'' to 6'' x 8''

Providing/Re-setting Ashlar Fine Masonry of reuse-stones in lime mortar 1:1 in plinth as per detailed specifications and drawings or as directed including the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Teakwood in structural members : Providing and fixing Ist quality (Superior Quality) Teakwood in structural members like Purlins of size (6" x 4" x 9') including removing damage/decayed wood members,fixing stainless steel screws, cutting, sawing,making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete. For wood size = 6'' x 7'' to 6'' x 8''

Providing and fixing jaali wooden door of thickness 0.035 m including fixing 8mm dia MS round bars, frames, pivot and providing rust proof paint to iron patti, pointed nails, steel roller, track for movement of wooden shutter etc, complete as directed by engineer in charge (excluding frame) It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Department’s FDCML

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 600 mm diameter in proper line, level and slope etc. complete.

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 900 mm diameter in proper line, level and slope etc. complete.

Providing signages as Quotation

Making of relief architectural carving on the surface of the stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required.

Making of moulding or carving on stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required.

Providing Stone Benches.

Providing Water purifier.

Providing Dustbin.

Saiprem Construction Latur (BID ID -6953808)

Savani Heritage Conservation Pvt Ltd (BID ID -6954233)