REPAIR / REPLACEMENT/ MAINT OF STREET LIGHTS AND CERTAIN CONNECTED WORKS AT 39 WING AT AIR FORCE STATION UDHAMPUR.

Amount

S&F in repair of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 110 lumen/watts, 5700 K, including suitable SPD to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : HPL cat part No HPLLEDSL6060E /Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE Note for items Ser no 1 to 4:- (i) T&P required for repair/maintenance such as ladder are inclusive in the item rate. (ii) Rate of necessary arrangement for fixing LED light on existing bracket like reducer or extention of pipe by suitable size of GI pipe as per dia of LED light by welding etc are inclusive in the item rate.

S&F in repair of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 110 lumen/watts, 5700 K, includingsuitable SPD to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : HPL cat part No HPLLEDSL9060E /Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE

S&F in repair of LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 110 lumen/watts, 5700 K, including suitable SPDe fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : HPL cat part No HPLLEDSL12060E /Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE

S&F in repair of LED street light fitting 150 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 125 lumen/watts, 5700 K, including suitable toSPDe fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. .Make : HPL cat part No HPLLEDSL15060E /Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE

5. S & F in repair street light bracket made out of 40/50 mm dia GI medium grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 50 x 6 FI and nut bolts and washers all as specified and directed including taking down old.

6. Supply and fix in repair 1.5 Sqmm 2 core cable, PVC insulated and PVC round sheathed, copper conductor(flexible) industrial cable, 1100 volt, confirming to IS :694. Note- (i) Cable is required to be connected from junction box to LED lights with GI clamp & suitable lugs etc.

7. S & F in repair LT Cable junction box outdoor shall be made out of Polycarbonate with fixing arrangement reinforced than 205mm x 255mm x 112 mm(the cable size upto 25 sqmm). The polycarbonate junction box shall be environmental friendly, recyclable, halogen & silicon free, anti acid & anti corrosive. The Junction Box shall be rated for Degree of ingress Protection IP 66 in accordance with IEC 60529.Weatherproof, UV resistant. The gasket material of junction box shall be polyethane and the gasket shall be internally embedded. The Junction Box with 25Amp Connectors or Terminal Trip or Bus Bar and suitable clamps, nut bolts and washers for fixing on wall/pole etc complete all as specified and directed.

S&F in repair synthetic short entry cable glands with reducing sealing ring of sealing dia 5-11 mm for protection of incoming and outgoing cable running in Junction box fiited properly complete all as specified and directed.

M&L for disconneting and taking down U/S High Mast light fitting from the steel tower and repair the same (of any type, capacity & make) by replacement of spare parts & making the fitting functional and refixing after repairs all as specified and directed by Engineer-in-Charge. Note : Spare parts/accessories required to be replace shall be measured and paid seperately as "Supply only" under the relevent items.

Supply only 250 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k luminaire energy saving including driver and surge protection system, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- HPL cat part No HPLLEDFL25060D/Wipro/Crompton or equivalent approved by GE

Supply only 150 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k engergy saving including driver and surge protection system, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- HPL cat part No HPLLEDFL15060F/Wipro/Crompton or equivalent approved by GE

Supply only 60 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k engergy saving including driver and surge protection system, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- HPL cat part No HPLLEDFL06060F/Wipro/Crompton or equivalent approved by GE

M&L for cleaning and greasing,lubrication of High Mast light lowering device and making it smooth to operate as specified and directed by Engr-in-charge. Note :- 1. Greasing to GI wire and electric motor shall deemed to be included in the quoted rate. 2. Rate shall deemed to be included for the use of hydra for repairing the high mast light.

M&L for repair of gear box of High Mast light lowering device and making it smooth to operate as specified and directed by Engr-in-charge.

M&L for repair of lifting motor of existing capacity and size of High Mast light tower and making it smooth to operate after necesaary repairing work all as specified and directed by Engr-in-charge.

M&L for retro reflective LED sign board (with LED illumination 24x7 visibility) with a corrosion resistance 03 mm thick aluminium composite panel face to be fully concord with high intensity prismatic sheeting type IV retro reflective sheeting with MS angle frame of size 40 x 40 x 6 mm, along with HIP grade type IV sheeting, metallic border, aerows, name of plant/installation/destination name, Stainless steel nuts, bolts and washers and rivets including ploting/pasting/anti-corrosive paint - 02 coat over two coat of red oxide paint etc all as specified and directed by Engr-in-Charge. Note :-(a) Frame work for making good of sign board shall be measured and paid separately.

Supply and fixing of Mild steel frame work such as angles of size not less than 40x40x6 mm for supporting of aluminium composite panel including drilling and countersunk for screw, bending and welding angles, as necessary all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted surface of security light/ Road light pole of 6 mtr long by removing all dirt, dust etc with two coat of aluminium spray paint and synthetic enamel paint over that and numbering of each pole with white synthetic enamel paint on black/Blue back ground complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED Tiranga Rop light 18 Mtr , IP 65, Input Power 10W/meter,Input Voltage 220-240V AC, Input Frequency 50 Hzs, Input Current 0.045 Amp/mtr, Power Factor 0.95, Width of strip (+/- 0.1mm) 8 mm, length/reel - 18 Mtrs, Nos of led per mtr 120 LED, LED Beam angle 120 degree, Rope light per Colors length 6 mtr orange, 6 mtr white, 6 mtr Green, Fixing method silicone clip, ingress protection - IP 65, Ingress protection method silicone tube, silicone tube dimention 11.5 x 5.5 mm + 0.5 mm, working temp range -20 degree celcius to + 45 degree celcius, working humidity range 10-90 RH and all as directed by engr in charge. Make : HPL Cat part No - HPLFMRL60L10WPMTR or equivalent in approved make.

Supply and Laying Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured, cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade and connecting and testing in trenches, under floors/ roads or on walls complete including taking down old complete all as specified and directed of following sizes :- (Note 1.: Earth work, excavation shall be measured & paid separately under respective item of Schedule and wherever cable laying on walls and uses of thimbles etc rates shall deemed to be included in the quoted rates). make- Havells/Gloster/Polycab

10 Sqmm, 4 core cable

16 Sqmm,4 core cable

25 Sqmm, 3½ core cable

35 Sqmm, 3½ core cable

95 Sqmm, 3½ core cable

120 Sqmm, 3½ core cable

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil, all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.

.M & L for Sand cushioning to underground cable, provided with appropiate layer before and after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.

Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

S&F in repair 80 mm dia GI tubing,light grade,for protection of cable passing across the road,under floor etc,complete all as specified and directed by Engr-in-Charge.

S&F in repair 50 mm dia GI tubing,light grade,for protection of cable passing across the road,under floor etc,complete all as specified and directed by Engr-in-Charge.

M & L for road cutting incl necessary excavation 30 cm wide and 30 cm in depth as in trenches in any type of soils/rock for laying LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed.

S & F in repair automatic street light switch NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch ) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compund conforming to IP-66. The contactor, MCB and circuit wiring 16 sqmm copper shall be suitable enough to take load of 25 KW three phase load /8 KW load equally distributed over 3-phase (8 KW/phase), contactor rating 40 Amps(2 pole)and 40 amps 4 pole and MCB (single pole) rating 63 amps (SP-3 Nos) complete including sheet metal enclosure with stand made of suitable size angle iron and grouting of enclosure using cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge including taking down old. Make :- Healer and Model No. SWADEEP-02EC25kW 3 PHASE .

M & L in replacement of LED Driver with surge protector suitable for 60 to 90 watt LED fitting with universal voltage 90-300 volts alternating current ,short circuit,over temperature and over load protection complete all as specified and directed by Engr-in-charge.Make C&S/ Wipro /Philips/syska/havells/Bajaj or equivalent as approved by GE. Note:-Driver & surge protector shall be of same make or suitable for LED fitting as available at site.

M & L in replacement of LED Driver with surge protector suitable for 120 to 150 watt LED fitting with universal voltage 90-300 volts alternating current ,short circuit,over temperature and over load protection complete all as specified and directed by Engr-in-charge.Make C&S/ Wipro /Philips/syska/havells/Bajaj or equivalent as approved by GE. Note:-Driver & surge protector shall be of same make or suitable for LED fitting as available at site.

M & L in repair for digital programable timer switch of capacity 25 amps for street lights all as specified and directed.

M & L for Analog timer switch dial type 230 V AC 50 Hz of rating 16 amps for automatically turnning on and off of street and parameter lights including taking down old all as specified and directed.

Material and labour in repair for MCCB 4 Pole, 415 V, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 250 Amps with breaking capacity 35/36 KA complete all as specified and directed. Make :- Standard/Havells/Schneider/ABB or equivalent as approved by GE.

Material and labour in repair for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 100 Amps with breaking capacity 16 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

Material and labour in repair for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps with breaking capacity 35/36 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

Material and labour in repair for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 400 Amps with breaking capacity 35/36 KA complete all as specified and directed. Standard/Havells/Schneider/ABB or equivalent as approved by GE.

Supply and fix heat shrinkable End termination kits and accessories of following capacities and type:-

Outdoor/indoor 120 to 150 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable

Outdoor/indoor 70 to 95 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable

Supply and fix heat shrinkable straight through joint kit and accessories of following capacities and type:-

Straight through joint kit indoor/outdoor al conductor cable of size 150 to 185 Sqmm and 3.5/4 core

Straight through joint kit indoor/outdoor al conductor cable of size 70 to 95 Sqmm and 3.5/4 core

Laying under ground cables/Re-routing only LT UG cable of size 10 sqmm x 2,10 sqmm x 4 core to 185 sqmm x 3.5 core cable shall be provided under Sch 'B' or the existing overground and laying cable along with connection with LT panel/Pole or Other electrical equipment with proper thimble/Aluminium lugs and making good all as specified and as directed by Engr-in-Charge. Note :- (i) Execavation / Returning / Filling / cable protection and sand cushioning shall be measured and paid separately. (ii) Quoted rate shall be inclusive of cutting cable/jointing of cable, provision of thimbles, lugs, cable gland for connection of cable IN / OUT from Panels/Feeder Piller Boxes/Bus bar as per Site requirement. (iii) The crimping shall be done only by Hand Operated / Hydraulically Operated Crimping Tool after applying conducting jelly and no other method will be allowed. (iv) Extra use of cable shall be measured & paid separately in case of non availability of EM store.

Painting to steel tubular swaged poles 9 mtr long of LED light complete including all MS work mounted on pole, earth protection & with pipe (if exists) with two coat of aluminium spray paint and synthetic enamel paint and numbering of poles with white synthetic enamel paint on black /Blue back ground complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair of DWC HDPE tubing 50 mm bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge.

.Supply and fixing in repair of DWC HDPE tubing 80 mm bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge. Note- (a) The using of GI Clamp in the wall/drainage rate are deemed to be included in the quoted rate. (b) The insulation of DWC pipe should be of high that does not deteriorate with UV rays/ heavy sun rays/winter season etc. (c) Drawing existing cable through DWC pipe shall be deemed to be included in the quoted rates.

Supply and fix 250 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k luminaire energy saving including driver and surge protection system, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- HPL cat part No HPLLEDFL25060D/Wipro/Crompton or equivalent approved by GE

Supply and fix 70 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k engergy saving including driver and surge protection system, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- HPL cat part No HPLLEDFL06060F/Wipro/Crompton or equivalent approved by GE

Supply and fix 120 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k energy saving including driver and surge protection system, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directedMake- HPL cat part No HPLLEDFL12060F/Wipro/Crompton or equivalent approved by GE

Supply and fix 200 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k engergy saving including driver and surge protection system, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- HPL cat part No HPLLEDFL15060F/Wipro/Crompton or equivalent approved by GE

Supply and fix 30 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 kengergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directedMake- HPL cat part No HPLLEDFL03060FE /Wipro/Crompton or equivalent approved by GE

Supply and fix in repair 50 watt RGB LED flood light water proof outdoor type with IP 66 protection energy saving, durable environmental friendly with aluminium die cast body with anti rust coating equipped with 6 KV surge protection and remote control features all as specified and directed by Engr-in - charge.

Supply and fix in repair 10 watt water and dust proof cylindrical shape focus light with IP 66 protection durable environmental friendly with aluminium die cast body including nut,bolts and washers for fixing arrangement all as specified and directed.

Supply and fixing in repair of Round Bollard 600 mm, 12 Watt, with metal body, suitable for bulb LED, IP 54 (Bulb 100 Lm/w), energy saving, environmental friendly, long life aesthetically designed aluminium landscape refer to the use of outdoor illumination for garden light for diffused lighting with high power LED as light sources including cutting/chassis and fixing arrangement in the cement pillar/PCC cube/Wooden Bamboo etc with the help of fixing arrangement for angle, fastner etc all as directed by Engr-in-Charge. Make : Cat Part No HPLLEDB9W of HPL or equvalent to Havells/bajaj/philips/C&S Note :-. (a) All civil/electrical work & material is deemed to be included in the quoted rates. Make: Havells/CG/phillips/Bajaj/Jaguar

Supply and fixing in repair Solar lights outdoor waterproof dancing fire mashaal Flame torch 96 LED 2200 Mah battery Lantern landscape lighting dusk to down with auto On/Off switches to the use of outdoor illumination for garden light for diffused lighting including cutting/chassis and fixing arrangement in the cement pillar/PCC cube/Wooden Bamboo etc with the help of fixing arrangement for angle, fastner etc all as directed by Engr-in-Charge. Make:-Havells/bajaj/philips/C&S Note :-. (a) All civil/electrical work & material is deemed to be included in the quoted rates.

Supply and fixing in repair of Globe for Park light/decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp of pole dia 40 to 80 mm including cutting/chassis and fixing arrangement in the cement pillar/GI tubing/wooden bamboo etc with the help of fixing arrangement of nut, bolt and washer etc and electric connection to the lamp complete all as specified and directed by Engr-in-Charge. Make: Havells/CG/phillips/Bajaj/Jaguar/polycab

Supply and fixing in repair of Cone Round Post Top Lantern 25 Watt, IP 65 LED post top, symmetrical light distribution, spun aluminium landscape luminaire, refer to the use of outdoor illumination for gate light for diffused lighting with high power LED as light sources, offers uniform luminaire for different applications including cutting/chassis and fixing arrangement in the cement pillar with pole dia 50 to 80 mm with the help of fixing arrangement for nut, bolt, fastner etc all as directed by Engr-in-Charge. Make: Havells/CG/phillips/Bajaj/Jaguar

S&F in repair steel tubular swaged pole of 9 mtr long complete with cast iron base plate , finial taper plug, bolts , nuts and screws duly painted with two coats anti corrosive paint internally complete and externally upto planting depth alternate black and yellow straps of synthetic enamel paint 30 cm each up to 1.5 mtr from GL and remaining pole painted with aluminium paint including writing No complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:3:6 type C2 with using 40 mm graded aggregate as in foundation of pole /for ducting with necessary form work complete as specified and directed

M&L for type PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in coping etc for pole/ ducting including necessary form work complete all as specified and directed.

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3391578)

shivom builders (BID ID -3391081)

slathia construction works (BID ID -3391068)

PROACH ASSOCIATES BUILDERS & ENGINEERS (BID ID -3390601)

MOHAN LAL AND SONS (BID ID -3390777)