Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹44.9 L+₹5.2 L (13.1%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹46.4 L+₹6.7 L (17.0%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹46.6 L+₹6.9 L (17.4%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹47.8 L+₹8.1 L (20.5%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹40.5 L
EMD Value
₹81,000
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
COMPREHENSIVE B/R MAINT WORKS AND PERIODICAL SERVICES AT NEW MH BAIRAGARH UNDER GE BHOPAL
2022_MES_525754_1
8884/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹81,000
Yes
23 Jul 2022
23 May 2022
20 Jun 2022
23 May 2022
18 Jun 2022
6 Jun 2022
60 days
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description.
M&L for rendering 20mm thick on faces of brick or concrete surfaces (External surfaces) shall be done in two coats comprising cement and sand mortar (1:4) 5mm thick mixed with water proofing compound @ 3% by wt of cement over a backing coat of cement and sand mortar (1:4) 15mm thick and finished with trowel to an even and smooth surface without using any extra cement complete all as specified and directed. (Note :- Water Proofing compound shall be measured and paid seperately) Note :- The quoted Rate shall be deemed to inclusive of scaffolding upto height of 12 m
Supply only Integral water profing compound, complete all as specified and directed.
Dismentling structural steel work including purlins, tursses, etc. complete all as specified and directed.
S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL] .
M&L for applying high Granular textured finish paint over and including one coat of primer as per manufactures instructions complete all specified and directed . NOTE:- (i) Texture finish shall be applied by texture roller to produce high profile texture finish. (ii) Make of Granular textured finish paint:- Asian or equivalent in Dulux/Nerolac as approved by Engineer-in-charge. (iii) 3mm thick wall care cement putty where ever required shall be measured & paid separately.
M&L for dampness rectification in toilet area/corridor area filling tile joints with epoxy grout, Clearing all tile joints with grinder and removing existing cement grout, cleaning the surface to remove all foreign material applying masking tape around to joints filling tile joints with epoxy grout removing the tape and cleaning tiles with thinner & acid to make it stain free, complete all as specfied and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.
M&L for water proofing treatment to sunken surfaces of slab in following sequence, complete all as specified and directed. :- (a) Slope correction providing PCC 1:1.5:3 using 12.5mm graded stone aggregate, average thickness 25mm, mixed graded styone aggregate, average thickness 25mm, mixed with integral water proffing compound "DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE, in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5kg/sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (f) 48 hrs testing of treatment for water thightness by ponding of water.
M&L for dampness rectification on Wall Area in following sequence, complete all as specified and directed. :- (a) Surface Preparation : Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level. (b) Coating : Applying two coats of Dr Fixit Pidifin 2k/Equivalent (a two component, anti-fungal, acrylic waterproofing coating) over cleaned surface with brush. And allowing it to dry for 24 hours. (c) Finishing the surface : Applying 15 mm thick cement plaster in CM 1:4 mixed with water proofing compound and including putty over the treated surface to provide proper finish complete all as specified and directed.
Taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.
S&F 15mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.
M&L for Cutting chases, pinning in, making good to facings in brick wall where required and pointing in cement mortar 1:3 to ends for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 20 cm girth, complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for vitrified light shade flooring tiles 8-10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for vitrified light shade tiles, 8 to10 mm thick (Square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in pointed in white or coloured cement to match tile to match the colour of tiles with & including 10mm thick rendering in CM 1:3, complete all as specified and directed.
M&L Granite 20mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
M&L for rounding to edges of stone one edge such as in steps,cooking platform and other similar situation, complete all as specified and directed.
M&L for Machine cut Kota stone slab flooring 20-25mm thick with and including 20mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, etc with and including 10mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.
Taking up or down 25 mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.
S&F GI tube medium grade 25 mm bore with all fitting and fixed complete to wall and ceiling or laid in floor, complete all as specified and directed.
S&F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 914mm x 460mm x 203, bowl size:- 405mm x 354mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed. [MAKE:- Prayag (Cat No.1239D Gloss) or equivalent in NIRALI/BLUE STAR/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8302) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8306) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8328) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8318) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs 15 mm pillar taps, fancy type chromium plated,with extended lever handle and wall flange elbow operated fixing complete all as specified and directed by engr in charge. (MAKE- JAGUAR Cat no. FLR-CHR-5031N /MARC or equivalent AS APPROVED BY GE)
S&Fin repair 15 mm Bib taps, fancy type chromium plated with extended lever handle and wall flange elbow operated fixing complete all as specified and directed by engr in charge. (MAKE- JAGUAR Cat no. FLR-CHR-5043N /MARC or equivalent AS APPROVED BY GE
S&F in repair brass chromium plated shower rose 125mm in size with or without swivel joints any size incl fixing to steel pipe or union , complete all as spfecified and directed.
S&F in repairs 20 mm (Curtain rail) mild steel chromium plated facy type with fixing brackets, stops, rollers etc complete all as specified.
M&L for 12mm thick prelaminated particle board both sides with decorative choice lamination fixed with screws complete all as specified and directed
Taking down chowkhats or frame with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete with wire gauzed bar, dovetailed or welded complete all as specified and directed.
Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws .
M&L framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.
S&F steel ventilator with top hung shutters including hinges with fixed type MS handles peg stay and tower bolt but with additional sash bars MS flats for fixing of wire gauge complete all as specified and directed.
S&F in repairs galvanised mild stel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed and with stainless steel wire staples fixed complete all as specified and directed.
Taking down door shutter any description exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.
Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.
S&F factory made PVC moulded shutter wire gauzed i.e. Panel will be of wire gauze in lieu of wood grain printed PVC sheet panel . The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, complete all as specifed and directed.
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
M&L for factory made, second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
M&L for 30mm thick 1st class hardwood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc. (with out sash bar), edges of framing plain, Chamfered, fitted with cut and mitered beads for securing glass etc. complete all as specified and directed.
S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.
S&F 150 mm Aluminium handles, cast type, anodised, complete all as specified and directed
S&F 150mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.
S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.
S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F in repair brass mortice latch 4 levers vertical type size 100mm, complete all as specified and directed.
M&L preparatration of new surfaces of wall including brooming, scraping down smoke spot, moulds, moss, effloresecent salts trading oil, greasy spots and stopping nails marks and applying two coat of cement base paint, complete all as pecified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and as directed.
M&L for applying one coat of white wall putty on walls complete all as specified and directed. Make -Birla/JK putty.
M&L preparatration of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss , effloresecent salts trading oil, greasy spots and stopping nails marks and applying one coat of Oil emulsion distemper complete all as pecified and directed. (Note : Required scafolding is included for painting at any height.)
M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of exterior acrylic emulsion paint, white or tinted complete all as specified and directed. [Make:- Apex Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI / make as per Appx 'C' as approved by GE] (Note : Required scafolding is included for painting at any height.) NOTE:- (a) The work of applying exterior acrylic emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (c) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (d) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (e) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work.
M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint, white or tinted complete all as specified and directed. (Note : Required scafolding is included for painting at any height.)
M&L preparatration of old decorated surfaces of ceiling including brooming, scraping down smoke spot, moulds, moss , effloresecent salts trading oil, greasy spots and stopping nails marks and applying one coat of white wash, complete all as pecified and directed.
M&L for preparation old painted steel and iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over and including a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L preparatration of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, effloresecent salts trading oil, greasy spots and stopping nails marks and applying two coat of Anti bactorioal, Anti fungus paint, complete all as pecified and directed.
M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.
S&F 20mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then -310 grms) complete all as specified and directed.
S&F in repair gun metal gate valve 25 mm with iron wheel, screwed both ends for iron pipes, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles/ rubbish off the permises to a distance not exceeding 250m complete all as specified and directed.
M&L for 50 mm dia UPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water complete all as specified and as directed.
S&F in repair 32mm bore PVC waste pipe for kitchen sink one mtr long, complete all as specified and directed.
S&F in repair 40 mm bore PVC waste pipe for kitchen sink one mtr long, complete all as specified and directed.
S&F in repair 100mm dia CP grating complete all as specified and directed.
S&F in repair PVC connection 15mm size PTMT nuts of length 600mm, complete all as specified and directed.
S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, ISI marked, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115), PRAYAG (Cat No.4055) or equivalent in CERA/PARRYWARE/ HINDWARE/ make as per list of make Appx 'C' as approved by GE.]
S&F Vitreous China Oval shaped counter top Wash Basin, white, flat back, Size 550x400mm / std size including waste pipe, coupling, PVC pipe connection 15mm dia 600mm long complete all as specified .
S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 & 120404)/ Prayag ( Cat No 4016) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]
S&F in repairs Vitreous china wash basin, white, flat back, size 610 x 445mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-SOMANY (Cat No.110162) or equivalent in CERA/PARRYWARE/HINDWARE/PRAYAG as approved by GE.]
S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.
S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repair health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and as directed.. [MAKE:- Prayag (Cat No.BEA-18) or equivalent in JAQUAR / PLUMBER / MARC/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Jet spray (butterfly) with 1 mtr tube complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-18) or equivalent in JAQUAR / PLUMBER / MARC / make as per Appx 'C' (list of make) as approved by GE]
S&F in repair toilet paper holder of mild steel chromium plated 'D' type , fixed to walls with chromium plated brass screws, complete all as specified and directed. [MAKE:- Prayag / JAQUAR / PLUMBER / MARC / make as per Appx 'C' (list of make) as approved by GE]
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (double T), equal or unequal, 75mm bore complete all as specified and directed.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified and directed.
S&F PVC (SWR) floor/Nahani trap, plain with CP grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed.
S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articeles, complete all as specified and directed.
M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
S&F Mild steel TMT bars 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for reinforced cement concrete (Nominal mix) type B-1 1:2:4 ( using 20 mm graded stone aggregate) in foundation, raft, basement slab, etc complete all as specified and directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping etc) all as specified and directed.
Taking down aluminium doors n.exe 4 sqm each and refixing in same position after carry out necessary repairs including replacing rubber/aluminium beading and jointing cleats, tightening if required including making good existing surface, complete all as specified and directed. (Note :- Any aluminium style, rail, frame, floor spring, hydrulic door closer if required to be replaced, will be measured and paid seperately under respecective item.)
M&L for fabricating and fixing in repair powder coated (Minimum 50 miciron ) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners, plug for fixing with walls, column etc including taking down damage portion of damage door, windows or taking down complete door/ window complete all as specified and directed. (Note :- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc complete)
S&F in repair Floor door stopper 150mm long of aluminium ally body and tonge, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
Dismantling water tanks exc 500 ltr cap & n.exc 1000 ltr cap of any size or capacity and removing to store complete all as specified and directed.
S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
Dismantling of Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or insulation board / slabs / blankets, any thickness including cover fillets, complete all as specified and directed.
M&L for galvanised cold rolled steel section frame work size 600x600 grid size 24x38x0.50 (composite thickness) Tee (bottom pre-coated ) and size 24x24x0.50m (composite thickness) thick wall angle, galvanised cold rolled steel section including suspenders as per (Gabsec) manufacturs insturction as in ceiling, complete all as specified and directed.
M&L for Asbestos free calcium silicate board of size 600x600x6mm thick fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper complete all as specified and directed.
Running welding in repairs thickness of metal to be welded not exc 6mm thick including taking down the article and refixing in position after welding (if required) complete all as specified and directed.
Taking down existing roof treatment on roof slab, paraphet etc complete all as specified and directed.
M&L for 10 mm thick plaster in CM 1:4 mixed with and incl water proofing compound @3% by weight of cement applied over roof slab, complete all as specified and directed.
M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3mm having thermal insulation with white mineral/gravel finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed.:- (a) Applying 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on cleaned roof surface.(Plastering shall be measured under item No 119.00 aboove) After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment. (c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated. (d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. (e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction.
Disconnecting of existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position capacity of tank exc 1000 ltr & n. exc 2000 ltr. Note :- Rate inclusive of temporary connection for supply of water.
Demolition of cement concrete in floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes, complete all as specified and directed
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
M&L Providing Precast cement concrete loures and jallies, 25mm thick (mea sured solid) using cement concrete type B-0,1:2:4 (using 12.5mm graded aggregate) including all mouldings but excluding frame etc. complete all as specified and directed.
S&F 12mm thick toughen glass as in glazing to doors in approved shape & design with and including necessary steel fittings & fixtures such as 500mm long stainless steel handle fixed both sides in each shutter, lock fixed with floor/wall/ceiling, floor spring, hinges, etc complete all as specified and directed.
M&L for Metalic ceiling T 24 plain/corrugated /semi corrugated poweder coated duly interlocked as in false ceiling board of width 100mm/ 150 mm 0.5 to 0.7mm fixed to steel frame work as in ceiling , including dismantling complete all as specified and directed.
All as per item No 129.00 above but refixing only complete all as specified and directed.
M&L for Providing cement concrete type B0 1:2:4 (12.5 mm graded aggregate) mixed with water proofing compound @ 3% by wt of cement in benching, roof kerbs of mud stops, rounded or chamfered on edges, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. (Note :- Water Proofing compound shall be measured and paid seperately)
M&L for Precast Machine pressed Cement concrete tiles with grey cement and no pigments of size 25 cm x 25 cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors and cut and polished including bedding layer of 15mm thick screed in CM 1:4 as in roof complete all as specified & directed.
M&L for cleaning of structural glazing/ glass using cleaning product as approved by GE incl necessary scaffolding upto 30 m height complete all as specified and directed.
Schedule of credit (calculation will be done off line) Rs. 32590.00
AJIT ENTERPRISES
M/S BRIJLAL UPADHYAY
Samaksh Enterprises
M/s VIKAS TRADERS
PADAMSHRI CONSTRUCTION CO
RAJPATI CONSTRUCTION
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .