Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹20.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest and Reasonable | |
| 2 | L-2₹20.9 L+₹7,668 (0.37%)Rejected-Finance 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹21.3 L+₹47,334 (2.27%)Rejected-Finance | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹24.8 L+₹4.0 L (18.9%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest | |
| 5 | L-5₹25.4 L+₹4.6 L (21.9%)Rejected-Finance | L-5 | Rejected-Finance Other than Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srinagar
Garrison Engineer (AF) Air Force Station Srinagar 190 007
WELCOME MAINTENANCE AND OTHER MISC WORKS IN OMQ AREA, MES OFFICER RESIDENCE (OTM) UNDER GE (AF) SRINAGAR
2024_MES_662489_1
GE (AF)/SGR-14/2024-25
Open Tender
Civil Works
Item Rate
180 days
AOR of GE AF Srinagar
Please refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹80,000
Yes
3 Sept 2024
27 Jun 2024
20 Jul 2024
27 Jun 2024
18 Jul 2024
11 Jul 2024
Amount
Prepartion of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD), complete all as specified and directed.
Prepartion of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying two coats of distemper oil emulsion paint (OBD), complete all as specified and directed.
Complete removal of existing treatment from wall surfaces and appliying two coats of oil bound distemper of approved colour over one coat of primer and applying 1 mm thick in one coat white cement base wall care putty as per manufacturar's instruction preparatory to distempering including preparation of surface by washing rubbing down and stopping of distempered surfaces, complete all as specified and directed.
Preparation of old plastered/unplastered old decorated surfaces of ceiling / False ceiling, cornices by brooming down or steel brushing, scraping down smoke. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper, complete all as specified and directed
Preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters and applying one coat of white wash, complete all as specified and directed.
Preparation of old decorated or unplastered surfaces of walls including cornices, pilasters and applying one coat of white wash, complete all as specified and directed.
Preparation of old decorated or unplastered surfaces of walls including cornices, pilasters and applying two coats of white wash, complete all as specified and directed.
Preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old decorated or unplastered surfaces of walls or concrete surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one coat of cement based paint over a coat of primer, complete all as specified and directed.
Complete removal of existing treatment from brick walls or concrete surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coats of cement based paint over a coat of primer, complete all as specified and directed.
Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement/newly plaster surface and applying two coats of anti fungal exterior emulsion paint over a coat of primer, complete all as specified and as directed.
Preparation of old plastered / unplastered of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and eflorescent salts and trading oil & greasy spots of walls and applying one coats of anti fungal exterior emulsion paint, complete all as specified and direced.
S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin/ urinal, complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5 m fitted in the existing water connection in the toilets, complete all as specified and directed.
S&F in repairs CP Tubular towel rail, 20mm dia, 60cm long between flanges including brackets, complete all as specified and directed.
S&F in repairs plastic water closet seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.
S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, screwed down high pressure, complete all as specified and directed.
S&F in repairs 15mm bore pillar taps, cast copper alloy quarter turn, chromium plated, fancy type, CP screwed down high pressure, complete all as specified and directed.
S&F in repairs 15mm bore Stop valve/angle valve, Fancy type, chromium plated, cast copper alloy screwed down high pressure with capstain head, complete all as specified and directed.
S&F in repairs hot and cold water mixer with swan neck for WHB, chromium plated quarter turn screwed down for pipe of bore 15mm, including necessary fittings, complete all as specified and directed.
S & F in repairs 15 mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
S&F in repairs vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed.
S&F in repairs 15mm bore steel warer tubes, 'medium grade', galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.
S&F in repairs 20mm bore steel warer tubes, 'medium grade', galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.
S&F in repairs 500 liter capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 ltrs and refixing the float valve and plugging wash pipe, complete all as specified and directed.
Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 sqm and n exc 2 sqm each including resecuring/changing of builders hardware, complete all as specified and directed.
Taking down aluminium door/window shutter of any size n exc 2.5 Sqm each & refixing in the same position / opening after easing and adjusting, tightening of joints or changes of hinges, screws, cleats, beadings, rubber gasket etc, as per site requirement to make functional the shutter, complete all as specified and directed.
Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n exc 1.50 sqm each including making good area, complete all as specified and directed.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each including making good, complete all as specified and directed.
S&F pressed steel frame for doors with two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc including PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed.
S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc including PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size, mortice lock etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581)(d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx. (ii) Floor door spring will be measured & paid separately.
Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx.
S&F sheet glass 4.8mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular, complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm coloured made out of 5mm plain colour PVC sheet reinforced with M.S all as specification and drawing, complete all as specified and directed.
S&F 30mm thick factory made solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, suppling and fining in frame at site as per specification and drawing, complete all as specified and directed.
S&F 35mm thick second class hardwood, Factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.
S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F in repairs 250mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed.
S&F 150mm size aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 100mm size aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F 100mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F 100mm long Floor door stopper of aluminium alloy body and tongue with rubber cover ends, complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed.
S&F in repairs mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel/ wooden shutter of door & windows, complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exceeding 0.50 Sqm including hacking out old, complete all as specified and directed.
S&F Stainless steel trollies including cutlary tray, plate rack, utensil tray etc for modular kitchen of any size and shape with all asseriores i.e SS sliding Channel 304 grade, SS screws etc as approved fixing in position including necessary drilling, pvc cap,self threading screws, complete all as specified and directed.
S&F in repairs stainless steel telescopic type sliding Hinges fixed in position for drawer in kitchen cabainate, complete all as specified and directed.
S&F stainless Steel fancy type round D Drawer Cabinet Handles, 4 Inch including all fitting, complete all as specified and directed
S&F 1 meter door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and directed.
S&F in repairs kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or influding fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm, complete all as specified and directed.
S&F in repairs kitchen plate rack made of stainless steel 1 mm wall thickness with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all assessaries, complete all as specified and directed.
Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
S&F GI frame work 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre including Providing and fixing Gypsum Board 12mm thick (water proof) in ceiling fixed with screw or as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges othe board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper, complete all as specified and directed.
S&F snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with glavanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print), complete all as specified and directed.
M&L for 12mm thick Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame worko with staples on snap grid, complete all as specified and directed.
S&F in repairs 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws putty to receive finishes, complete all as specified and directed.
Dismantling of mild steel works of any description, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe 290 Gde-E-165, complete all as specified and directed.
S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde-E-165 , complete all as specified and as directed.
Dismantling of Plain corrugated or asbestos steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc, complete all as specified and directed.
S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed.
All as per Ser item No. 71.00 here in above but except sheet.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead, complete all as specified and directed.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed.
Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coats of synthetic enamel paint over one coat red oxide primer, complete all as specified and directed.
Preparation of old zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coats of synthetic enamel paint, complete all as specified and directed.
Preparation of newly steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
Preparation of new wooden surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound upto 12m height including taking down old plaster, complete all as specified and directed. (Note : WPC shall be measured and paid separately.)
Supply only water proofing compound.
M&L for 15 mm thick cement plastering in CM 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement upto triple storey height including taking down old plaster, complete all as specified and directed.
Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint upto triple storey height, complete all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land, complete all as specified and directed.
Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level, complete all as specified and directed.
M&L for 25mm thick cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed.
M&L for 100mm thick cement concrete, 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) as flooring and finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 75 mm thick cement concrete, 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in sub base, complete all as spciified and directed.
M&L for Plain cement concrete tiles 30 cm x 30cm x 25 mm thick with grey cement and no pigment machine pressed, set joined and pointed in neat cement slurry in roofs over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to matcht, as in Skirting over and including 10 mm thick backing coat in CM 1:4, complete all as specified and directed.
M&L for Glazed ceramic tile 300 x 600 x 06-7mm thick (coloured) on vertical surfaces such as wall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Glazed ceramic tile 450 x 300 x 06-7mm thick (coloured) on vertical surfaces such as wall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.
M& L for Light shade Vitrified Ceramic tiles 08 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
M& L for Light shade Vitrified Ceramic tiles 08 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in Skirting over and including 10 mm thick backing coat in CM 1:4, complete all as specified and directed.
M&L for strong silicone sealant suitable for roof leak hole, metal leak, gap filling etc hole size n exc 5x5mm including necessary fitting and scrafolfing height upto 15 m, complete all as specified and directed.
Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismentling/taking down items) worth 71,510.00 during AOC. Note :- Tenderers shall not quote for this Schedule.
M/S GHULAM MOHAMMAD AND CO.
M/S BASHIR AHMAD TANTARY
M/S GULAM AHMAD ABDUL SAMAD
M/S LUCKY BUILDERS
M/S Thakur & Sons
M/S JAN BUILDERS
M/S WANI AND SONS
M/S FAROOQ AND SONS
M/s PARVAZ CONSTRUCTION COMPANY
M/S TARIQ AHMAD SHEIKH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .