ADDITION / ALTERATION TO BLDG NO. P-45 HAP

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above GL) all as specified and directed.

Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for two layer (15 mm thick ) Rendering of top layer 5 mm thick with WPC over a 10 mm thick base layer rendering in CM 1:4 on concrete masonary or surfaces other than fair face of brick work finished fair and even without using extra cement.Note WPC shall be measured and paid separetely in supply only item.

M& L for rendering 10 mm thick cement plaster in CM 1:3 on fair faces of brick work on concrete surfaces on ceiling including finished even and smooth all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:3 on brick or concrete surfaces, window /door jombs finished even and smooth without using extra cement all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in all as specified

M & L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) in PCC 1:3:6 type C1 using 20mmgarded aggregate and setting in mortar 1:4 complete, in walls complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces, finshed even and smooth without using extra cement all as specified and as directed.

Use and waste of form work to sides and soffits of shelves, cooking platforms etc rough finished surfaces

M & L for RCC 1:2:4 type B1 using 20mm graded aggregate as in shelves, kitchen platforms etc all as specified and directed

M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

M & L for Mild steel TMT bars 6 to 8mm dia and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed.

M & L for 18 to 20 mm thick 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado or cooking platform etc laid over cement screed bed 15 mm thick in CM 1 : 4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Dismantling of floor hearth or wall tiling, terrazo tiles of anmy thickness including cement mortar bedding (but not backing) removing tiles and rubbish off the premises.

M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces 350 x 250 x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat complete all as specified and as directed. Make : Somany, Johnson, AGL, Kajaria

M & L for 25mm thick cement concrete type B-0, 1:2:4 (12.50 mm grade aggregate) as in levelling course in flooring finished even and fair under floor finishes.

M & L for Double Charged Vitrified Ceramic Colour tiles 9 to 10 mm thick light shade(Square / Rectangular) polished , area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and as directed . Make : Somany, Johnson, AGL, Kajaria

All as per Sl Item No. 19 above but as in skirting over cement mortar backing coat in CM 1:3 10 mm thick. Make : Somany, Johnson, AGL, Kajaria

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/Rectngler) area exceeding 0.06 sqm and but n exceeding 0.11 sqm , in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe. Make : Somany, Johnson, AGL, Kajaria

All as per Sl Item No.21 above but as in skirting over 10 mm thick cement mortar backing coat in CM 1:3 complete all as specified and directed. Make : Somany, Johnson, AGL, Kajaria

Taking down steel windows completely of size not exc 1.00 Sqm each

Taking down steel windows completely of size exc 1.00 Sqm but nexc 1.5 Sqm each

Taking down steel windows completely of size exc 1.50 Sqm each

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed .

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed .

S & F 35 mm thick, Factory made Flush shutter, solid core construction , with block board core, with lipping all round complete all as specified and as directed .

S & F 35 mm thick, Factory made second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and tred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); complete all as specified and as directed

Taking down and refixing in same opening of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each all as specified and directed

S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type three track windows two glass and one wire mesh shutter without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Note : Glass pane and SS wire mesh shall be measured and paid separately in supply only item.

S & F Brass 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.complete all as directed and specified.

Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed

Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane all as specified and as directed

Supply only 4mm thick figured galss, pin head type as in louvers, fixed glazing not exc 0.5 Sqm in each pane

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and as directed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified and as directed

Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed.

Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed

S & F mortise lock vertical type brass 100mm 4 lever complete all as specified and as directed.

S & F 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and as directed.

S & F Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S & F Stailess sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as specified and as directed. Make : Parryware, Nirali, Kajaria sanitary ware,

S & F PVC waste pipe, 32 mm dia, 750mm long, suitable for Kitchen sink,fixed in repairs all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S&F in repair 15 mm aerated bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old tap.

S&F in repair CP angle valves (half turn type)/ conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old valve

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed

S & F 15 mm dia aerated CP wall Mixer for mixing hot & cold water screwed down for iron pipe Central Hole r without Pop-up waste system complete all as specified and as directed.

S & F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads,swan neck type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S & F in repairs S/S Toilet paper holder with flat recessed type complete all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm ling between flanges complete all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F in repair CP towel Ring Square with Round Flange, Cat Part No-ACN-1121N, complete all as specified and as directed . MAKE:- JAQUAR

S & F CP Soap DishHolder, Cat Part No-AKP-35731P, complete all as specified and as directed MAKE:- JAQUAR

S & F in repairs Mirror cabinet 622x422mm all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brakcet guard and railing 60cm long complete all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F Corner Glass shelf (with bracket), Cat Part No-ACN-1173, complete all as specified and as directed MAKE:- JAQUAR

S&F in repair Vitreous china wash hand basin, white, flat back of size 630 x 450 mm white excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling 32 mm dia as suitable complete all as specified and as directed by the Engr-in-Charge.

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floorcomplete, including fixing of PVC flush tank and seat cover as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

Supply only Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed all as specified and as directed. (Note: Seat cover make should be same as of WC make) Make : Jaquar , Hindware. Cera, Parryware

Supply only PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware .

S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed.

S & F in repairs CP fancy bib taps 15mm bore complete all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S&F in repairs 32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S&F in repairs 40mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 1000litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank 1000 litre capacity complete all as specified and as directed. Make : Sintex Polycon, Rotex

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 500litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank 500 litre capacity complete all as specified and as directed. Make : Sintex Polycon, Rotex

S & F in repairs Ball valves high 25mm bore pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and as directed.

S&F in repairs PVC bends of 110 mm dia complete all as specified and as directed.

S&F in repairs PVC bends of 75 mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cementbends of 75 mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) junction (Single T) equal or unequal fixed to 75mm bore of pipes with access door all as specified and as as directed.

S&F in repairs PVC (SWR) junction (Single T) equal or unequal fixed to 110mm bore of pipes with access door all as specified and as directed.

S&F in repairs PVC (SWR) vent cowl fixed to 110mm bore of pipes all as specified and as directed.

S&F in repairs PVC (SWR) vent cowl fixed to 75mm bore of pipes all as specified and as directed.

S & F Stainless steel gratings with frame, 100 mm dia, with/without hole for waste pipe connection all as specified and as directed.

Dismantling of wall ceiling boards ( fibre, plup, insulation, etc) nor insulation boards/slabs/blamkets, any thickness, including cover fillets.

S & F 605 mm x 605 mm Anodised aluminium snap grid frame work for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, (frame work shall made as per site requirement for any type , shape ) complete all as specified ®all as specified and as dircted.

S & F 600 mm x 600 mm x 12 mm thick Acoustic ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

S & F 600 mm x 600 mm x 12 to 15 mm thick Perforated Acoustic Hilux Calcium silicate panels/tiles of any pattren made of siliceous and calcarireous material reinforced with cellous fibre fixing to aluminium grid work grid work by screwing 150 mm C/C as in wall panelling (Frame work for wall panelling shall be measured and paid separately in respective item) including fixing of glass wool/minaral wool by cutting to required size , shape and inserting in to frame work etc complete all as specified and as directed.

S & F Rectangular tube 60 mm x 40 mm x 2 mm thick Anodised aluminium section as in grid or frame work on wall surface 600 mm x 600 mm centre to centre to receive wall panelling fixed with 100 mm long self taping screws/fastners self taping screws 150 mm centre to centre complete all as specified and as directed.

Supply only 40 mm thick Bonded mineral wool blanket/Glass wool blaket made from glass, density 24 kg/Cum all as specified and as directed.

M&L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 2mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.50 mm thick wall care putty complete all as specified and as directed.

M&L for preperation of newly plastered surfaces of ceilings and applying two coats of oil bound distemper on ceiling surfaces over a coat of alkali resistant primer ocomplete all as specified and as directed.

M&L for preperation of old decorated surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, oil and gresy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfaces over a coat of alkali resistant primer complete all as specified and as directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron ) having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over newly plastered surfaces of wall surfaces complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Material and labour for prepration of new wood or wooden based surfaces or perviously treated surfaces,not otherwise described,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed

Material and labour for prepration of old wood or wooden based surfaces or perviously treated surfaces,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed

M & L heavy duty pavement tiles of size 400 mm x 400 mm x 12 mm /300 mm x 300 mm x 12 mm thick for out door spaces any colour/pattren of (acid skid , anti bactireal , stain resistance & scratch resistant, tiles) set jointed and pointed in chemical laid over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Removing material or debris retrives from above demolition or cleaning to a distance exceed 1.5 Km and not exceeding 5.0 Km and depositing where directed complete all as specified and as directed

S & F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked

Taking down carefully copper/aluminum sub main wiring of any size including casing and caping / conduit and making good the disturbed surface of walls as directed.

Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed.

Taking down carefully DB box including mcb, mccb of any size and any type complete all as specified and as directed.

Taking down ceiling fan/exhaust fan,sealing cable end,dismantling blades and removing fan and handing over to MES store complete all as specified and as directed

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and as directed for the following:- (a) One light point /Fan point controlled by one switch.

(b) One 5 Amps socket point on independent board.

(c) All as per item No.113 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .

(d) All as per item No.113 above but wiring complete with 4 Sqmm for AC point

Supply & fixing modular switch 06 Amps 1 module complete all as specified & as directed

S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & as directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & as directed

S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & as directed.

Supply and fixing 35/36 W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified & as directed (Make : Havells / CG / Bajaj)

S&F in repair LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and as directed.

S&F Lumiline LED tube with box type fitting , 2 feet, 10 watts alongwith tube complete all as specified and as directed. Make : Bajaj /CG/Philips/Havells

S&F Celing Fan complete with blades ,elcetronic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers complete all as specified and as directed.

S&F in replacement single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and as directed by Engr-in-charge.

Supply and fix ceiling rose surface bakelite three terminals 65x50mm complete all as specified.

S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and as directed.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and as directed.

S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.

S & F MCCB DB Vertical TPN 4 way 'A' frame,including MCCB TPN 63 Amp breaking capacity 16 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and as directed. Make- Havells or equivalent

M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and as directed. (Note :- 2 runs cable and one run of conductor and one run of PVC conduit shall be measured as as one unit length

All as Srl item No. 129 but two single core 2.5 Sqmm and 2.5 Sqmm for earth continuous earth wire. (Note :-2 runs cable and one run of conductor and one run of PVC conduit shall be measured as as one unit length

Taking down Split/Multi AC unit 1.5/2 Ton capacity/3 ton capacity(indoor and outdoor unit) with voltage stabilizer and AC manager by removing all electrical connections and indoor to outdoor unit gas pipes, nut bolts from HQ bldg and shifting to store for safe custody. After completion of civil work, Refixing/installing Split AC/window AC 1.5/2 Ton with voltage stabilizer at the suitable place by connecting all electrical connections and copper piping with insulation (5/8th x 3/8th and 1/2" x 1/4") with nut bolts as per site requirement, testing and commissioning, if any extra cable ,gas pipes, gas filling require at the time of installation the quoted rate is deemed to be included, No extra cost will be paid to contractor complete all as specified and as directed by Engr-in-charge.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 35 sqmm 4 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/ Polycab/Grandlay) NOTE : Excavation & Earthwork, sand cushioning & brick protection shall be measured & paid seperately

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc getting out and forming bottom surface to required gradient complete all as specified and as directed

Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified. ( Punned thickness shall be measured & paid)

Brick protection cover on cable with sub class 'B' brick,laid dry and flat adjacent to each other complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick complete all as specified.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified.

Taking down rusted GI wire and Supply & fixing GI earth wire 4.00 mm dia for interconnecting of earth electrodes all as specified.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore light gradeGI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009.

Shanthi Construction (BID ID -3420136)

SAI RAM CONSTRUCTIONS (BID ID -3420376)

PRAGATHI BUILDERS (BID ID -3425284)

B5BUILDING SOLUTIONS (BID ID -3428352)