SPECIAL REPAIR TO BLDG NO P-04 AT LGJ MIL STN

Amount

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specificlly provided for complete all as specified and directed by Engr-in-charge.

Dismantling of brick tiles in floor or roof laid dry and pointed in cement mortar complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.

M&L for reinforced cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in chajjas, slab, projection complete all as specified. Note : Reinforcement shall be measured and paid separately.

Formwork to chajjas, troughs and similar items including edges , for rough surface of concrete, complete all as specified and directed by Engineer-in-charge

S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip all as specified & directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or grade E- 165 complete all as specified and as directed

M&L PCC (1:5:10) using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge.

Supply only integrated water proofing compound complete all as directed by Engr-in-charge.

M&L for 50 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:30 complete all as specified.

M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge.Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching.(ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.

M & L for cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed with grey cement and pigment over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed with grey cement slurry mixed with pigment and no pigment in floors/roof, and cut and polished complete all as specified and directed.

M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed

M&L for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.

M&L for brick work with fly ash bricks straight or curved on plan any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed

Taking down chowkats or frames but with shutter without taking off shutter from the frame area n exc 1.5 sqm each but with shutters (without taking off shutters from the frames) and removing from site,complete all as specified and directed.

Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Two panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.

Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.

S&F framed work as in chowkats of doors/ windows of angle iron ,gates or other section with gusset plates, rails, braces etc conforming to Gde Fe 410-0 or Fe 310-0 complete (Quality -A) all as specified and directed by Engr-in-Charge.

S & F hold fast of flat iron conforming to Fe-290 or Fe 330 including preparing the surfaces & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified & directed.

S&F aluminium handles anodised cast type 125 mm long all as specified & directed by Engr-in-charge.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.

S&F 100 mm long butt hinges extruded aluminium alloy with galvinised mild steel hinge pin, anodised and fixed type B-21 complete all as specified & directed by Engr-in-charge.

S&F for 100 mm long butt hinge, medium weight, cold rolled mild steel all as specified and directed.

S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.

S&F as 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.

Supply & fixing, 2nd class hard wood (Sal or any other) articles not exceeding 200 cubic centimeter each as small fittings such as shaped door and window stops and the like, including necessary lobour etc all as specified and directed by Engineer-in-charge

S&F factory made window, made out of MS hollow section of size 79mm x 39mm x 1.6mm thick frame with double shutter (glazed and wire guage shutter) made out of Z section using flush butt welding and tenon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutter, locking arrangement as per sample approved by GE, provided with knob 'Z' section handles 100mm size and 150 mm long hook and eye welded to frame and shutter,four number legs welded to frame including necessary flat iron beading for securing wire gauge and 8nos tower bolt 150mm length and guard bar used only 12mm square bars(guard bar measured and paid separately under respective item) etc complete all as specified & directed by Engineer-in-Charge.

S&F in repair steel ventilator with top hung shutter including highes, steel peg stay complete all as specified and directed

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.

M&L for Non skid coloured ceramic tiles (Joint less) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.36 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge

M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed

M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.

Taking down cement plaster/terrazoo on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed

M & L for Rendering 15 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth on wall and smooth without using extra cement all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair complete all as directed.

M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even without using extra cement complete all as specified & directed by Engr-in-charge.

M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-charge

M&L for preparation of old plastered or pointed surfaces of wall and applying two coats of white wash complete all as specified and directed by Engineer-in-charge.

M&L preparing newly plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-charge

M&L for preparation of old plastered surfacesof ceiling and applying two coats of white wash complete on ceiling all as specified and directed by Engineer-in-charge.

M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment and two coats of acrylic distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.

M&L preparation of new or wooden based surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.

M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of new surfaces applying with two coats of synthetic enamel paint over coat of red oxide primer ordinary tint all as spefified and directed

M&L for preparation of old steel surface of any description not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint all as specified.

M&L for preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint all as specified.

S & F 4 mm thick pin head glass and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4.0mm sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or any pattern), including all fitting, such as heads, shoes ,bends swan-necks etc, complete all as specified and directed by Engr-in -Charge.

S&F 110 mm dia bore SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls and including bend as per side requirement, taking down existing pipe all as directed.

S & F 450 mm long mild steel GI pipe, medium grade of size 40 mm dia as in spouts pipe in sunken floor including making holes in RCC and making good with CM 1:1 or PCC (1:2:4) complete all as specified and directed by Engineer-in-Charge

S & F SWR bend 110 mm bore all as specified & directed by Engr-in - charge

S & F in repair 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.

S & F in repair cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S & F in repair cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S & F in repair 75mm bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint, laid in trenches or in floor complete all as specified and directed.

S & F in repairs of cast iron floor trap dia of out let 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed by Engineer-in-Charge.

S & F in repair 75 mm bore of cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches and Oval access door complete all as specified and directed

S & F in repair cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Taking down 15 mm dia steel tubing including all connected fittings of any dia and in any position all as directed.

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

Taking down 20 mm dia steel tubing including all connected fittings of any dia and in any position all as directed.

S&F 20 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

Taking down 25 mm dia steel tubing including all connected fittings of any dia and in any position all as directed.

S&F 25 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capestan head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.

S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup fixed all as specified.

S&F in repair CP brass stop valve/angle valve, fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed complete all as specified and directed by Engr-in-charge.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm bore all as specified and directed by Engineer-in-Charge.

S&F in repair tubular towel rail stainless steel 20mm dia 'D' type 60cm long between flanges complete all as spd & dir by EIC.

S&F repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed all as specified.

S&Fin repair vitreous china wash down water closet (pedestal pan and trap), white (excluding fixing bolts ,flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etccomplete.

S & F in repairs Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin coloured counter top (bowl type/oval shape) of size 560x450mm with, 32mm dia chromium plated waste coupling long screwed shank and CP trap, including cutting for and pinning in ends of brackets in 1:3 CM complete all as specified .

S&F in repairs grating doom CP 100 mm dia with waste hole complete all as specified and directed

S & F in repairs 32 mm PVC waste down pipe suitable for WHB and urinal complete all as specified and directed by Engineer-in-charge

S & F in repairs pillar tap swan neck, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with lettered hot/cold with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long.

S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair glass corner shelf with CP brackets and CP railing complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated fancy type soap dish complete all as specified and directed

Dismantling of water tank exc 500 but n. exc. 1000 litre capacity any type and remove from site complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tank 2000 litre capacity any type and remove from site complete all as specified and directed by Engineer-in-Charge.

S&F 1000 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

S&F 2000 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed.

M&L for continous brick edging; with brunt bricks old size bricks, with width equal to the depth of the brick; liad dry on end vertically complete all as specified and directed by Engr-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.

M & L for 16 to 18 mm thick granite (black type) of approved colour as in shelves/partition rubbed and polished, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding the edges half round on exposed side over and including 20 mm thick screed base in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge

M & L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.

M & L for Machine cut kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed

S&F in repairs for stainless steel drapery rods, standarad quality, not less than 28mm dia with heads, brackets and boths ends stainless steel caps , etc. all as specified and direced.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones of size 300 mm x 300 mm x 100 mm with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed.

M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with oversand cushion all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in benching / haunching of manholes including forming channels including necessary formwork etc.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weathering slightly rounded or chamfered angles and throating, as directed including necessary formwork etc.

M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces all as directed (Reinforcement shall be paid separately)

E/M Portion Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.

M&L point wiring for one light point controlled by one switch with 1.5 Sqmm (nominal cross section area) PVC insulated unsheathed multistranded copper conduct cable in and including medium grade rigid PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3 mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly and making good diturbed surfaces in cement motar 1:3 complete all as specified and directed.

,--ditto--- all as per Serial item No 117 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.

,---ditto-- all as per item No.117 above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.

Supply and fix piano swith flush button single pole one way 5 Amps complete all as specified and directed

Supply and fix piano socket 2 in 1, 2/3 pin 5 amp flush type 240 volts AC complet all as specified and as directed

Supply and fix socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complet all as specified and as directed

Supply and fix piano swith 15 am flush type 240 Volts AC complet all as specified and as directed

S & F LED light fitting 1 x 20 W, 230 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-charge

S & F mirror light fitting durable & weather proof industrial lighting solution luminaire with IP-65 protection acomplete all as specified and directed

Supply and fix ceiling rose surface bakelite 65 c 50 mm three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position

Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed

Supply and fix MCB SP 240 volt 5-32 amp 10KA complete all as specified and as directed.

Supply and fix MCB SP&N 240 volt 5-32 amp 10KA complete all as specified and as directed.

Supply and fix MCB SP 240 volt 40 amp 10KA complete all as specified and as directed.

Supply & fix LED building security light fitting 25 watt with epoxy powder coated sheet aluminum housing, with epoxy powder coated CRCA sheet steel gray tray, clear acrylic cover and accesories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 02 seats of FI clamps made out of 30 x 5 MS flat & nuts, bolts & washer inclufing painting to clamp with two coats of aluminum silver paint over a coat of primer after taking down old u/s one Make : Bajaj Cat pt No BRLEP 25 W LED or equivallent in Crompton/Havells.

Supply & fix fresh air fan 230 mm sweep, single phase 230v 50 Hz including grouting with fasteners, nuts/bolts etc complete all as specified and directed by Engineer-in-Charge

Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length including taking out existing sub main wiring and making good diturbed surfaces in cement motar 1:3 complete all as specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Dashmesh Construction Company

SHIVA CONSTRUCTION COMPANY

PAREEK AND COMPANY

ram rattan dass aggarwal

KHANNA CONSTRUCTIONS