SPECIAL REPAIR TO TRAVERSE OF ESH NO 20 AND ESH 51 AT BENGDUBI MIL STN UNDER GE BENGDUBI

Amount

Surface dressing n exc 15cm deep in soft and loose soil, including dispsoal of debries outside the site premises, complete all as specified and directed by GE.

Demolition of reinforced cement concrete as in retaining walls, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition), and removing rubbish off the premises, complete all as specified and directed.

M&L for RCC (1:1.5:3) (nominal mix) (using 20 mm graded stone aggregate) as in walls, reaining walls, basement walls, ballast walls and like; any thickness; above top of footings, including attached pilasters and buttresses, complete all as specified and directed.

M&L for Formwork to to faces of walls, retaining walls, abutments, parapets and straircase railings and similar work including attached pilasters, buttresses, etc; vertical or to better to achieve the fair finished surfaces, complete all as specified and directed.

M&L for mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Taking down cement plaster from the surfaces of brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish off the premises, complete all as specified and directed.

M&L for rendering 10 mm thick on brick work or concrete surfaces in cement morter (1:4), finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer, complete as specified and directed.

Forming embankments (soil) including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exc. 1.5m high but n. Exc. 3.0m high from base, complete all as specified and directed.

Forming embankments (soil) including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exc. 3.0 m high but n. Exc. 4.5 m high from base, complete all as specified and directed.

Forming embankments (soil) including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exc. 4.5m high but n. Exc. 6.0m high from base, complete all as specified and directed.

Forming embankments (soil) including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exc. 6.0m high but n. Exc. 7.5m high from base, complete all as specified and directed.

Supply of approved earth free from grass, vegetation, saplings etc from outside of MoD land including necessary excavation, loading, transportation and dumping earth at the location of embankment, also including necessary royalty and other elements, complete all as specified and directed.

M&L for complete removal of existing treatment from the wall surfaces, preparing the surfaces and applying two coats of cement base paint (in multishade camouflage pattern), over a coat of cement primer, complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length, in the weep holes of the Retaing Wall, complete all as specified & directed.

CHAKRABORTY AND SONS

M/S R. K. INDUSTRIES

M/S AHUJA TRADING

M/S G D CONSTRUCTION

M/S TARAN INFRACON