Development of Childrens park /ladies gym in sy. no. 2/1 at Narayan nagar Honda Sattari Goa

Amount

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. (a) Ordinary Soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (a) All kinds of soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (b) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. (a)All kinds of soil

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Supplying and filling in plinth under floors, trenches including watering ramming consolidating,dressing, complete.(b) Moorum

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (a) Pre-construction

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in all sizes in superstructure from floor I level upto floor V level.

Providing & laying cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: (a)All works upto plinth level

Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering and finishing etc. (a) Kerbs, steps and the like at or near ground level

Centering and shuttering including strutting , proping etc. and removal of form for : (i)Foundations, Footings, Bases for columns

Centering and shuttering including strutting , proping etc. and removal of form for : (ii)Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Centering and shuttering including strutting , proping etc. and removal of form for :(iii) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)

Centering and shuttering including strutting , proping etc. and removal of form for : (iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering and shuttering including strutting , proping etc. and removal of form for : (v) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth

Centering and shuttering including strutting , proping etc. and removal of form for : (xiii) Suspended floors, roofs landings, shelves & their supports

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates (iv) Cornices and mouldings

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) (a) All works upto plinth level

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) (b) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) (c) in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level

Providing TMT steel reinforcement bars of SAIL, TATA,VIZAG make only(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level (iv) M-25 grade of concrete

Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. *PER BAG OF 50 KG. OF CEMENT USED IN THE MIX.

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

An elastomeric, cementitious, waterproof coating for concrete and masonry.Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.

6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

12mm cement plaster 1:3 (1 cement : 3 fine sand)

18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster1:5(1cement: 5 coarse sand ) and top layer 5 mm thick with cement plaster 1:3 ( 1 cement :3 coarse sand ) finished with sponge. (External)

Neat Cement punning

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing louvers 50 mm wide in grooves in clerestory window frames excluding the cost of frames. (b) Glass sheets 3 mm thick

Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos :(b) 35mm

FRP (Fiber Reinforced Polymer) Frames Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.Specified Cross Section (c) c) 4” x 2 ½ “

Providing and fixing bright finished brass door latch withnecessary screws etc. complete. b)250 x 16 x 5 mm

Proving and fixing anodised alluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in charge: Window with two or three sliding shutters using 14.5/15 mm series shutters section. (b) Plain glass

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. (a) Jet Black

Providing and fixing vitrified/ceramic antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complet

Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.

Providing and fixing coloured ceramic tiles spartek or equivalent of 12"x12"( 399 x 150mm cut size) 6mm thick in skirting and dados on 12mm thick cement plaster 1:3(1cement :3coarse sand) and jointed with cement slurry complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm (a)Jet Black

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) (a) 20 mm thick.

Precast plain Cement Tacktiles 32mm thk of required shade in floors, treads of steps and landing laid on 25mm bed of cement mortar 1:4(1cement:4coarse sand) jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing complete.

Providing and fixing coloured ceremic tiles(bell or equivalent) of 16" x 16" size and 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete.

Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete: (a) 600x 600 mm Dark Shades

Providing and laying vitrified industrial floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete (b)300 x 300 mm dark Shades - 12mm thick

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. (a) Jet Black

Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (a) Jet Black

Providing & laying of minimun 80mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 and above grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.Size: 210mm x 150mm x 80mm thick (Type: Rectangular Type Pavers) (a) Grey Colour

Providing & laying of minimun 80mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 and above grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.Size: 210mm x 150mm x 80mm thick (Type: Rectangular Type Pavers) (b) Other Colours

Providing and Laying 36mm thick SBR with EPDM Insitu Rubber flooring of approved make for Outdoors gym areas (Non weight Training areas) Rubber flooring to br layed over the PCC slab of 100mm thickness complete as directed by the Engineer-in-charge.

Providing and laying of Outdoor badminton courts, 1) Fiber mesh, 2) synthetic Acrylic system 5nos of layers with, 1no of fiber mesh, 2nos of Acrylic resurface layers, 2nos of Acrylic colour layer, 1no of lane marker layer complete as directed by the Engineer-in-charge.

Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.

roving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. low level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fittings and clamps 25 mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required.(b)W.C. pan with black plastic seat and lid.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. (c) Flat back wash basin size 550 x 400mm with a pair of single 15 mm C.P. brass pillar taps.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (a) 750 x 20 mm size

Supply of Domestic Water Meter, horizontal inferential, Single Jet S-100 or equivalent with magnetic drive and dry dial suitable for ambient 50 degree C temperature duly sealed against tampering complete with couplings at both ends and conforming to Class B of IS:4064 Standard and will bear EEC Certification Mark along with life cycle certificate from FCRI or NABL and guarentee period of 12 months, suitable for maximum working pressure of 16 kg /sq.cm.Dia in mm 15

Jointing of rigid / SEL FIT PVC pipes by cleaning the pipe with solvent cement including the cost of solvent cement and hydraulic testing of joints etc. complete as per IS:7634-1975 Part 3, including hydraulic testing of joints as directed by the engineer in-charge. Outer Dia in mm (a) 63mm

Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.

Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw

Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (d) 32 mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (e) 40 mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (f) 65 mm nominal bore

Providing and fixing non-return valve of approved quality : (b) 32 mm nominal bore .

Providing and fixing non-return valve of approved quality : (e) 65 mm nominal bore .

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. (c) 1000 lit. capacity

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : (b) 150 x 100 mm size –P or S type

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2: 3 mix (1 cement: 1 1/2 coarse sand ; 3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :3 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. (d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610 mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Providing and fixing rigid PVC S.W.W. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: (a) 110 mm dia

Providing and fixing rigid PVC S.W.W. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: (b) 75 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. (a) 110 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. (b) 75 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : (a) 110 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : (b) 75 mm dia

Providing and fixing R.P.V.C. vent cowl: (a) 110 mm dia

Providing and fixing R.P.V.C. vent cowl: (b) 75 mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 (a) 20mm nominal bore

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (I) SCH-40 (blue)/(white)Outer Dia in mm (a) 15 mm nominal outer dia pipes

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (I) SCH-40 (blue)/(white)Outer Dia in mm (c) 25 mm nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (I) SCH-40 (blue)/(white)Outer Dia in mm (d) 32 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) (c) 25 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) (c) 25 mm nominal outer dia pipes. (d) 32 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) (c) 25 mm nominal outer dia pipes. (e) 40 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) (c) 25 mm nominal outer dia pipes. (f) 50 mm nominal outer dia pipes.

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.

Providing and fixing G.I. chain link mesh (sample to be approved by the Enginner-in -Charge)fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 1.80m centre to centre) well anchored in the R.C.C. wall including providing M.S. Structural members at top and bottom as per the strutural drawing with 3.0.m height etc. complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing, supplying and laying in position coloured tile roofing of make Monier Elabana concrete tile /Lafarge or with approved equivalent brand , with battens laid by mortar 1:3( 1cement : 2 fine sand)of section 0.04cms x 0.025cms or as directed by the Engineer-in-charge over the R.C.C. slab at c/c distance of 30cmsetc.complete. The colour and the size of the tile as stated in the approved drawing .

Providing, supplying and laying in position coloured Ridge tiles roofing of make Monier Elabana concrete tile /Lafarge or with approved brand with cement mortar 1:3( 1cement : 2 fine sand)and filling the all openspaces with mortar etc. complete as directed by the Engineer-in-charge etc.complete. The colour and the size of the tile as stated in the approved drawing .

Provide and fix a wooden decorative Eaves Board to the roof rafters as shown in the drawing made up of frame of sagwan/teak wood type and batten of section 20mm x15mm thick fitted on wooden frame asper the pattern shown .The assembly to be fitted with chromium plated screws s as directed by the Engineer-in charge etc. complete.

Supplying and laying in position coloured (green, Dual tone) tile roofing as directed by the engineer-in-charge over the shade pavilion at c/c distance of 30cms etc. complete as directed by the Engineer-in-charge.

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. (a) In R.S. joists, channels, angles, tees

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. (b) In flats of all sizes

Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Construction of a Cattle Trap of size as per the approved drawing by excavating a trench and providing sidewalls and bed concrete including centering and shuttering etc. complete along with following details:1) with M.S. Flat 45 mm x 10mm size 2mm thick to be welded to the ISMB 100 as shown in the drawing and the G.I. Pipes of 50mm dia. 'C' Class then to be welded to the flat and applying two or more coats with superior quality ready mixed paint over an coat of ready mixed primer of approved brand and manufacturer to all the units etc. complete. The frame to be embedded in the concrete wall with cover of at least 5.0cms.(Excavation,concreteand steel will be paid separately).

Providing supply and Fabrication of SS316 Grade structure for railing, Fencing, Roof structures using Tubular/Circular sections, Angles, Flats plates including Welding, Granding and Buffing etc complete.

Providing and fixing signade made up of 8mm thick acrylic white sheet with eco solvent self adhesive vinyl graphic as enclosed artwork & sizes with lamination fixed on wall/door with 10mm dia S.S Studs and as per specs. All works complete including scaffolding etc. as per the drawings and the direction of the Engineer-in-charge.

Providing & installing square shaped cast-iron gazebo/pavilion of size 10ft x 10ft. The gazebo/pavilion to be installed on the pre-fixed gusset plate/stand in the RCC column base with the screws and nut and painting with one coat of white paint (including priming coat), complete as directed by the Engineer-in-charge.

Proving and installing CI benches of size 5ft x 1.5ft, FRP planks with concrete pedestal complete as per the direction of Engineer-in-charge.

Supplying at store or site of work Rigid PVC (SEL FIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc. complete. Conforming to IS: 4985-2000, and bearing ISI mark Class 4 kg/cm2. Outer Dia in mm (a) 63mm

Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. (II) NP3 Class, (c) Dia in mm 150

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete (II) NP3 Class (b) Dia in mm 150

Providing and installing the Multipurpose play system in the child play area/ green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Spring rider duck in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge. RA-4iii Providing and installing the Spring rider Jumbo in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Spring rider Jumbo in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Aerial Stroller in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Chest press double in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Triple standing twister in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Shoulder spinner double in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Back extension in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Seated puller double in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installing the Sky walker in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Push up bar in the child play area/green gym area. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment. With 5 years of annual maintenance by the supplier complete as directed by the Enginner-in-charge.

Providing and installing the water filter cum purifier in the ladies gym. complete as directed by the Engineer-in-charge.

Providing and installing the Motorised Treadmill in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Elliptical Cross trainer in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Indoor bike in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Recumbent bike in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier, complete as directed by the Engineer-in-charge.

Providing and installing the Multi gym equipment in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Soulderpress + lat pull in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Chest pres + seated row in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Leg extension + leg curl in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Inclined Decline bench Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Dumbell stand in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Round dumbells in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the olympic plate tree & bar holder in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Olympic rod -6ft in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Olympic rod -4ft in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Kettle bell in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Plates in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the yoga mats in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Anti burst gym ball in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Aerobic step board in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in-charge.

Providing and installing the Matting 20mm thk rubber tiles-black color in Ladies gym equipments in the Ladies Gym block on existing Rubber Flooring as provided and stuck with glue. With 2 years of annual maintenance by the supplier. complete as directed by the Engineer-in- charge.

Providing and installation of movable badminton poles and nets. complete as directed by the Engineer-in-charge.

Providing and Supplying the Lockers storage cabinate cupboard with staple locking system of size (75x36x19 inch) of dark grey color in the ladies gym. complete as directed by the Engineer-in-charge.

Supply and Filling with approved black garden soil and spreading the same in soft landscape areas with layers of 20cms thickness in sequence and depths as specified by consultants.

Supply and grassing with following types of grasses by laying and spreading ready nusery grown dense carpets/turfs with size 2 feet x 1feet minimum,and of minimum green cover height of 1.5inches including watering and maintenance of the lawn for 12 months or more till the grass forms athick lawn. Zoysia Tenuifoliagrass (Mascrene or Mexican Grass)

Providing weep holes in Brick masonry/Plain/Reinforcedconcrete abutment, wing wall/return wall with 100 mmdia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce.Complete as per drawing and Technical specifications

Providing and fixing G.I. sheet of 26 S.W.G. for using in construction/Expansion joint wherever necessary as per directions of the Engineer-in-Charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.) (f) Group C -- with Cat B Modular Accessories

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. (b) Cat B

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc as required (b) Cat B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (l) 4 x 16 sq.mm + 2 x 16 sq.mm earthwire (40mm Conduit)

Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required) (f) 12 way (8+36), Double door, Vertical type, Cat B

2Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (c) 2 + 12 way Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required (f) SP, Cat B

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required (h) DP, Cat B

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required (i) TP, Cat B

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (i) TP, Cat B

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (d) 25 A, Cat B

Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 2 years warranty.

Providing and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for230/250 Volts single phase, 50 cycles A.C. supply, with one metre of 3core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 2 years warranty

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required --- Cat B

Modular GI Box for 1/2 module, Cat B

Modular base & cover plate for 1 module, Cat B

Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearing, 1400 rpm, complete with all accessories (a) Cat A

Supply and erecting S type Mild Steel fan hook fabricated out of 12 mm round bar complete as required.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Providing recess in stone wall suitable for erection of exhaust fan up to 450mm sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall.

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (1) 3 1/2 Core 25 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (3) 4 Core 4 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (4) 4 Core 6 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 1/2 x 25 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 4 x 4 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 4 x 6 Sq. mm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 50mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested. The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode

Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for conections etc. as required

Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing . as required

Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 105 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs at L50B50 , including driver complete with minimum 2 Year warranty as per specification No FG-ODF/PT.

Providing & erecting 3 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Supplying and erecting integrated LED flood light fitting Max. 30W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 3000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG

Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped brac

Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG

Providing & erecting 8 m high galvanised conical pole with foundation bolts having bottom dia. from 155 to 190 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL

Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL.

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm. complete on pole as per specification no. CB-SB

Supplying and erecting Concealed type foot/step light Max. 5W having IP67, IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs at L70B50, including driver by making necessary arrangement / recess in wall to make it flush with surface with minimum 2 Year warranty.

SHIVAM INFRATECH (BID ID -53448)