Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹36.2 L
Closing Date
20 Feb 2024, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Krishna Reddy G T
Up-gradation of 2x5MVA, 33/11kV Sub-Station at Sadashivanagar to 2x10MVA, 110/11kV GIS Sub-Station and Construction of 110kV LILO line with Lynx conductor from 110kV Belagaum-Uchagaon-Mache line for a distance of 2.88km to proposed 110/11kV Sadashivnagar Sub-station and Laying of 110kV, 630 Sqmm XLPE Single core UG cable from proposed 110kV Sadashivnagar Sub-station for a route length of 0.317k in Belagavi Taluk and District on Partial Turnkey Basis(Excluding 10MVA, 110/11kV Power Transformer and 11kV Switchgear), including Supply of all matching Materials/Equipments, Mandatory Spares and Erection (including Civil Works) of all Materials/Equipments, Testing and Commissioning
KPTCL/2023-24/SS/WORK_INDENT528
KPTCL/2023-24/SS/WORK_INDENT528
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT(GIS Substation) such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Documentary proof for Clause No. 3.2(b)(ii) of ITT(Transmission Line) such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Documentary proof for Clause No. 3.2(b)(iii) of ITT(UG Cable) such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Documentary proof for Clause No. 3.2(d) (I) of ITT Gas Insulated Switchgear Manufacturer such as necessary documentary evidence and end user certificates issued from utilities such as P.O copies or LOI/DWA, Performance certificates, as proof for Qualifying Requirements for GIS manufacturer
Documentary proof for Clause No. 3.2(d) (III) of ITT EHV UG Cable and UG Cable Accessories such as necessary documentary evidence and end user certificates issued from utilities such as P.O copies, Order Completion Certificates or LOI/DWA, Performance certificates, as proof for Qualifying Requirements for UG Cable and Cable Accessories
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent or verified and certified by Chartered Accountant/Cost Auditor as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information
The Tenderer shall upload the scanned copy of the Bank Guarantee towards EMD as per Clause No.13.1 of ITT
The type tests certificates of 110kV or higher voltage class, 40kA or higher short circuit level GIS modules not older than Fifteen (15) years as on the last date of submission of bid conducted at laboratories specified in the Tender Document shall be uploaded
In case of GIS switchgear, Type test reports of Parent company/ collaborator will be accepted provided same Design & process by which Parent company/Collaborator has manufactured the equipment, has been followed by Indian manufacturer. A separate letter especially for this tender which further legally endorses the guarantee by the Parent company/Collaborator shall also be uploaded, as per the format specified in the tender document
Manufacturers of Cable, Joints and terminations should have already successfully conducted the type tests as per the relevant IEC 60840 (with Range of approval as per IEC 60840) for the 110kV EHV UG Cables as envisaged in the tender. The type tests certificates not be older than Ten (10) years as on the last date of submission of bid shall be uploaded
Undertaking 1,1A and 1B, Deed of undertaking on Rs.200/- non-judicial stamp paper to guarantee Quality, timely supply, performance and Guarantee obligations as specified for the UG cable, UG cable Accessories and GIS Equipment. (Refer Section 4, Format of annexures)
Undertaking 2, to conduct special tests on the EHV Cable of 110kV 630Sq.mm of same Voltage class, design & cross section as tendered. (Refer Section 4, Format of annexures)
Undertaking 3, UNDERTAKING REGARDING PROCURING GIS EQUIPMENTS, EHV UG CABLES & THEIR ACCESSORIES. (Refer Section 4, Format of annexures)
Undertaking 4, 6 & 7, Undertaking regarding Type tests on GIS Module, UG Cable and UG Cable Accessories. (Refer Section 4, Format of annexures)
Undertaking -5, A letter especially for this tender which further legally endorses the guarantee by the Parent company/ Collaborator. (Refer Section 4, Format of annexures)
The Tenderer shall upload Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities).
self declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Bidder stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct
Self-declarations in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI& Annexure-XVII as per Clause No.2.4of ITT
Power of Attorney in favour of all the persons signing the documents,
Valid Super Grade Electrical Contractors License of the Bidder issued by the Govt. of Karnataka
Certificate of Incorporation of the Bidder or any relevant document in respect of Partnership/Proprietorship firms as per the tender document.
GST Registration Certificate
No Deviation Certificate
Letter of Undertaking as in Annexure
The Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender and Procurement - application for Vendor registration etc
undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure- XVII
Details of Works on hand and Ongoing contractual commitments
Upload all relevant documents as per Section-3 Qualifying information, NIT, Terms & conditions as stipulated in the Tender Document
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder, written Power of Attorney to the Signatory of the Bid to commit the Bidder to the Contract along with the resolution passed in this regard by the Board of Directors / all the Partners of the Firm
All self declarations, legally enforceable deeds & Undertakings as per terms and conditions of the tender
Any other required documents as per the qualifying requirements, terms and conditions of the tender
₹7,500
₹36.2 L
25 Jan 2024
25 Jan 2024
21 Feb 2024
25 Jan 2024
25 Jan 2024
Supply and Installation of Nitrogen Injection fire extinguishing system with fire extingushing cubicle(excluding civil works), control box, conservator isolation valve, fire detector, signal box, onli...
Fire detection system using smoke detectors heat detectors as per specification for GIS hall and control room,relay panel room,LTAC room, Office room, Monitoring Room etc complete
Metal encapsulated SF6 gas insulated Switchgear 40KA rating suitable for indoor installation of modular design
110 KV Line(U.G.Cable) Module : with GIS surge arrestor (2P+1F)"
Each Module comprising o...
110KV Transformer Module(For 110/11KV-10MVA)
Each Module comprising of the following:
a) SF6 circuit breaker Complete with operating Mechanism, 1600A, 3phase-1No.
b) Disconnector:
i) 3 Phase, singl...
110KV Bus Coupler Module
Each Module comprising of the following:
a) SF6 circuit breaker Complete with operating Mechanism, 1600A, 3phase-1No.
b) Disconnector:
i) 3 Phase, single Pole, Group operati...
110 KV (2 Modules 1 for each bus)
Each Module comprising of the following:
a) Disconnector:
i) 3 Phase, Single Pole, Group operating isolator switch complete with manual & motor driven oper...
Bus Maintenance earth switch 3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism - 1250 Amp
i)110 KV - 2Nos (1 for each bus)
Oil filled Current Transformer: 11KV CT's of ratio 1200-800/1-1-1A (for NCT) (Required for 110/11 KV Tr.)
Note: The characteristic of the above CT's shall be similar to that of main CT's in all respec...
Capacitor Bank : Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable...
Control Panels : SAS
a) 110KV line- Type 1L (Annexure RPP4 - cable- SAS)
1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of compo...
b)110/11KV Transformer - Type 1T1 (Annexure RPP5 - SAS)
c) 110kV Bus Coupler - Type 1BC (Annexure RPP6-SAS)
d) 11KV Line & Capacitor Bank- Type 1L (Annexure RPP7-SAS) (Provision for 2 line feeders to be made in one panel)(provision for 1 line & 1 Bus coupler to be made in one panel) (provision for 2 CB to b...
e) Numerical Differential cum distance Relay
Note: The Numerical differential cum distance relays of same make provided at proposed Sadashivnagar end shall be provided, installed, interfaced, commissi...
Sub-station Automation system (As per Annexure- SAS of Relay & Protection Panel and Sub-station Automation specification)
Note: a. The Accuracy class of metering core of CT's and also trivecto...
BUS BAR FORMATION:
For station portion:50mtr , for Cable portion : 100mtr
Auxiliary Transformer:
Supply & erection of station Auxiliary transformer with oil, outdoor type 100KVA, 11KV/433V, 3Ph, Vector Group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5...
i) Supplying and Erection of Double pole structure with 9 Mtrs RCC poles and with 11KV, 400A single break isolators and 9KV, 10KA surge arrestors (3 Nos) complete set for auxiliary transformer.
11kV Isolators & DP Structure
A) Supplying and Erection of D.P. Structure with all accessories using 9.0mtrs long, 145Kg WL RCC poles including H frame suitable for mounting DB/SB/Roaster GOS along ...
B) 11KV Isolators:
i) 11KV isolators, Double break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for Coyote ACSR. (For 11kV Capacitor Bank)
ii) 11KV isolators, Single break 400A, 25KA capacity with Roastor switch, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
iii) Lightning Arrestor -9kV, 10KA with connector and clamp
A) LTAC Panel (indoor) 415V, as per Technical specification comprising of Volt Meter, Ammeter, ( 2 I/C ACB 200A + 4O/G SFU 63A + 12 O/G 32A + 1B/C SFU 200A + 1 DG C/O Switch 300A) . with ETV Meter 3 ...
B) A.C. Distribution Box (Outdoor) :
AC distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/...
Power cable from auxiliary transformers to LTAC panel : 1.1KV PVC insulated 70 sq.mm Al. Cable, 3 1/2 core with glands/lugs/ferrules.
Power cable from auxiliary transformers to LTAC panel : 1.1KV PVC insulated 240 sq.mm Al. Cable, 3 1/2 core with glands/lugs/ferrules.
25 kVA Diesel Generating Set rated at 25 kVA, 3 Ph, 50Hz, 415V, 0.8 PF- supply, erection and testing & commissioning as per specifications
Station Battery:
220V, 300AH Battery set (Plante type or Grid Plate type)
Station Battery charger: 220V, 300AH Plante type Battery set consisting of 110 No. cells per bank with float (2 Nos) and Boost cum float (2 Nos) type battery charger including control panels, change o...
Copper Control Cables :
1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications.
i) 19 C x 2.5 Sqmm
ii) 4 C x 16 Sqmm
iii) 4 C x 6.0 Sqmm
iv) 2 C x 70.0 Sqmm
v) 10C x 2.5 Sqmm
vi) 4C x 4Sqmm
vii)4C x 2.5Sqmm
11KV U.G. Cable with the required cable terminations at both ends.
a) 11 kV class 3 X 95 Sq mm U G Cable XLPE
b)11KV XLPE cable, 1000sq.mm. Aluminium cable , 1Cx1000Sq.mm cable from 10MVA, 110/11KV transformers to 11KV Switchgear.
c)11KV XLPE 240 Sq.mm Aluminium cable-3 core ( From 11KV switchgear to DP Structure)
d) Cable Termination kits suitable for following sizes as per Technical Specification.
i) 95 Sq mm 3 core
ii) 1000Sq mm Single core
iii) 240Sq mm 3 core
Fire fighting equipment with necessary mounting stands.
a) Foam type extinguisher (Mechnical type): i) 50.0 litres capacity
ii) 9.0 litres capacity
b) Water type (Gas pressure type) - 9.0 litres capacity
c) Carbondioxide type - 4.5 Kg capacity
d) Dry Chemical Powder type -4.5 kgs
d) Sand type i) G.I. Bucket 9 litres capacity
ii) Steel stands for the above to have 4 Buckets to each stand.
Maintenance tools and Plant
a) Earth Resistance Tester
b) Welding machine (arc welding) 10KVA
c) Hickery Rods
d) Grounding Sticks extendable upto 18ft -3 nos of 6ft sticks of 3 phase R,Y,B(3 Nos of 1 set)
e) Manila Rope 1"
f) Manila Rope 3/4"
g) Files of various Sizes( One set of 6 Nos.)
h) Portable Drilling Machine with stand (heavy duty)
i) Hand Drilling Machine
j) Safety Belts
k) Safety Helmets
l) Steel Measuring tape 30 Mtrs
m) Steel Measuring tape 15 Mtrs
Furniture for Control Room Staff and Maintenance Staff :
a) Steel Almirahs 6.5 feet
b) Steel Almirahs 6.5 feet with glass panel doors
c) Officer's Tables
d) Steel Slotted Angle rack (big size)
e) Steel Slotted Angle rack (small size)
f) Steel Dust bins
g) Executive revolving chairs
h) S Type arm chairs
i) Steel folding chairs
Miscellaneous items: Miscellaneous items like rubber mats, first aid box, danger boards, shock treatment charts water filter door locks, fixograph, sub-station name board, and other sundry items (size...
b) First aid box
c) Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
d) Water filter/ Water purifier: Wall mounting type (Aqua - guard type)
e) Sub-station name board duly painted as per specification including erection & Civil Works.
f) Supply & erection of Fixograph of size 1.5m X 2.5m with English/ Kannada alphabets.
g) Door locks 7 levers (Navtal make)
h) Equipments name plates and earthing name plates including fixing at outdoor yard
Total weight of the Towers (High Tensile Steel) excluding Bolt & Nuts
Total weight of the Towers (Mild Steel) excluding Bolt & Nuts (Including the weight of Mounting Structure of Station Portion, Refer Techno Commercial Sheet for Break Up details)
Total weight of the Bolt & Nuts
(Including the weight of Mounting Structure of Station Portion, Refer Techno Commercial Sheet for Break Up details)
Tower Accessories:
a) Supplying and fixing GI angle 45X45x5 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower to facil...
b) Supplying and fixing of Barbed wire as per the specification.
c) Number Plates (1 No. per tower)
d) Danger Board (1 No. per tower)
e) Circuit Plates (1 No. per circuit)
f) Phase Plates (Set of 3 Nos.)
g) Earth Bonds300mm long
h) Earth Bonds 450mm long
i) Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal.
Insulators strings suitable for LYNX ACSR CONDUCTOR :
i) Single Tension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X8nos. of 90kN Disc insulators
ii) Single Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X7nos. of 90kN Disc insulators
b. Porcelain long rod insulator string equivalent t...
Insulator Hardwares for LYNX ACSR CONDUCTOR:
i) Compression type Single Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X8 units of 90kN Disc insulators to suit...
ii) Compression type Double Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X8 units of 90kN Disc insulators to suit LYNX ACSR conductor
iii) Compression type Single Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X7units of 90kN Disc insulators to suit LYNX ACSR conductor
iv) Compression type Double Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X7units of 90kN Disc insulators to suit LYNX ACSR conductor.
NOTE: All the Insulator s...
Accessories for Lynx ACSR Conductor:
a) Mid Span Compression Joints
b) Pre formed armour rods
c) Repair sleeves
e) Vibration dampers
Station Mandatory Spares
MANDATORY SPARES
1. For GIS Common Spares, Maintenance and Testing Tools
1.1 SF6 Gas pressure relief devices of each type
1.2 Pressure gauges (of each type) along with coupling device, gas pressure transmitter
1.3 Rubber Gaskets, “O” Rings and seals for SF6 gas
1.4 Molecular filter for SF6 gas
1.5 Density Monitors for SF6 gas
1.6 All types of Control Valves for SF6 gas
1.7 SF6 gas ( 10% of total gas requirement subject to min of 30 kgs)
110kV Bushing for connection to GIS duct
2. CIRCUIT BREAKERS - GIS
i) 110 KV, 1600A Circuit Breaker interrupting chamber complete with all necessary apparatus.
ii) Rubber gaskets, O rings and seals
iii) Trip coils with resistor.
iv) Closing coils with resistor
v) Relays, Power contactors, push buttons, timers & MCB etc.
vi) Closing assembly/ valve
vii) Trip assembly/ valve
viii) Pressure switches
ix) Auxiliary switch assembly
x) Operation Counter
xi) Rupture disc/diaphragm
xii) Windoscope / Observing window
a) 110KV,1600A circuit Breaker operating mechanism, complete with all necessary connecting apparatus.
All types of coupling for SF6 gas(1 no. each type)
DISCONEECTORS & E/SWITCH GIS
110KV, 1250A disconnecting & maintenance earthing switch internal parts, complete with all necessary gaskets, mounting hardware etc.,
Operating mechanism of 110KV, 1250A Disconnecting switch, complete with all necessary connecting apparatus.
110KV, 1250A, single phase high speed fault making Earthing switch Internal parts complete with all neccesary gaskets mounting hardware etc.,
Operating mechanism of 110KV, 1250A, high speed fault making Earthing switch, complete with all neccesary gaskets connecting apparatus.
Limit switch & Aux. switches
CURRENT TRANSFORMER -GIS
110KV Complete CT
(1 no. of each rating)
VOLTAGE TRANSFORMER-GIS
110KV Single phase VT complete with all gaskets and mounting hardware.
(1 no. of each rating)
SURGE ARRESTOR -GIS
110KV class Complete L.A. including with Surge counter & accessories
(1 no. of each rating)
EMERGENCY DG SETS :
i) Set of filters (Lubeoil/fuel/Air ckt) 1 set
ii) Solenoid coil assembly
iii) Self starter assembly
iv) Lub-oil pressure safety control
v) High water temp. safety control
SPARES FOR RELAY AND PROTECTION PANELS
I. Relay Panel Spares:
i) All type of Numerical relays
(1 no. of each type)
ii) Trip circuit supervision relay
iii) Self reset trip relay [1no. of each type]
iv) Hand reset trip relay [1no. of each type]
v) Timer relay [1no.of each type]
vi) DC supervision relays
vii) Flag relays [1no. of each type]
viii) Auxiliary relays [1no. of each type]
II. Mandatory spares for Sub-Station Automation system
i) Bay control unit with configuration software
ii) Ethernet Switch of each type
iii) Optical cable of longest length
Testing and Maintenance equipments for GIS
i) SF6 gas filling and evacuating & storage plant
ii) Portable Partial discharge(PD) monitoring for GIS(minimum 6 channels)
iii) SF6 Gas leak detector
iv) SF6 gas analyser kit
UG Cable Mandatory Spares
Joints suitable for 110kV(E) 1Corex630 sqmm, Compact Circular type copper conductor, XLPE insulated, Lead sheathed cable, complete with all accessrories as per the Technical Specification.
Station Erection
Power Transformer :
10 MVA, 110/11 KV, Delta/Star, Dyn11, 3-Phase, 50 Hz, Core type winding with OLTC, RTCC Panel, etc., complete filled with Transil Oil and 10% spare oil in non-returnable drums and ...
Erection, Testing and Commissioning of
1) 110 KV Line(U.G.Cable) GIS Module : with GIS surge arrestor (2P+1F)" - 3Nos.
2) 110KV Transformer GIS Module(For 110/11KV-10MVA) -2 Nos.
3) 110KV Bus Coupl...
Erection, Testing and Commissioning of Bus Maintenance earth switch 3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism - 1250 Amp
Oil filled Current Transformer: 11KV CT's of ratio 1200-800/1-1-1A (for NCT) (Required for 110/11 KV Tr.)
Note: The characteristic of the above CT's shall be similar to that of main CT's in all respec...
Control Panels : SAS
a) 110KV line- Type 1L (Annexure RPP4 - cable- SAS)-3 Nos.
b)110/11KV Transformer - Type 1T1 (Annexure RPP5 - SAS)-2 Nos.
c) 110kV Bus Coupler - Type 1BC (Annexure RPP6-SAS)-1 No...
d) 11KV Line & Capacitor Bank- Type 1L (Annexure RPP7-SAS) (Provision for 2 line feeders to be made in one panel)(provision for 1 line & 1 Bus coupler to be made in one panel) (provision for 2 CB to b...
e) Numerical Differential cum distance Relay
Note: The Numerical differential cum distance relays of same make provided at proposed Sadashivnagar end shall be provided, installed, interfaced, commissi...
Total Weight of GI Mounting Structures including Bolt & Nuts
Auxiliary Transformer:
Supply & erection of station Auxiliary transformer with oil, outdoor type 100KVA, 11KV/433V, 3Ph, Vector Group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5...
Supplying and Erection of Double pole structure with 9 Mtrs RCC poles and with 11KV, 400A single break isolators and 9KV, 10KA surge arrestors (3 Nos) complete set for auxiliary transformer.
11kV Isolators & DP Structure
A) Supplying and Erection of D.P. Structure with all accessories using 9.0mtrs long, 145Kg WL RCC poles including H frame suitable for mounting DB/SB/Roaster GOS along ...
B) 11KV Isolators:
i) 11KV isolators, Double break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for Coyote ACSR. (For 11kV Capacitor Bank)
ii) 11KV isolators, Single break 400A, 25KA capacity with Roastor switch, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
iii) Lightning Arrestor -9kV, 10KA with connector and clamp
A) LTAC Panel (indoor) 415V, as per Technical specification comprising of Volt Meter, Ammeter, ( 2 I/C ACB 200A + 4O/G SFU 63A + 12 O/G 32A + 1B/C SFU 200A + 1 DG C/O Switch 300A) . with ETV Meter 3 ...
B) A.C. Distribution Box (Outdoor) :
AC distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/...
Power cable from auxiliary transformers to LTAC panel :
a)1.1KV PVC insulated 70 sq.mm Al. Cable, 3 1/2 core with glands/lugs/ferrules.-200Mtrs
B)1.1KV PVC insulated 240 sq.mm Al. Cable, 3 1/2 core...
Station Battery:
220V, 300AH Battery set (Plante type or Grid Plate type)
Station Battery charger: 220V, 300AH Plante type Battery set consisting of 110 No. cells per bank with float (2 Nos) and Boost cum float (2 Nos) type battery charger including control panels, change o...
Copper Control Cables :
1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications.
i) 19 C x 2.5 Sqmm-4000Mtrs
ii) 4 C x 16 Sqmm -500Mtrs
iii) 4 C x 6.0 Sqmm -5000M...
11KV Switchgear :
11kV, MCVCB, 500MVA, 11KV, 25KA, 1600A for I/C & 1250A for feeder
(2IC + 1BC+12F+2CB+1AP3 ) (Remote Announciation cum Control panel) with CTs & PTs and terminal connectors suitabl...
11KV U.G. Cable with the required cable terminations at both ends.
a) 11 kV class 3 X 95 Sq mm U G Cable XLPE -250Mtrs.
b)11KV XLPE cable, 1000sq.mm. Aluminium cable , 1Cx1000Sq.mm cable from 10MV...
d) Cable Termination kits suitable for following sizes as per Technical Specification.
i) 95 Sq mm 3 core a) Indoor -4 Nos b) Outdoor- 4Nos.
ii) 1000Sq mm Single core a) Indoor-6Nos b) Outdoor-6N...
Station yard lighting/Lightning Protection :
(Provision made for quoting the rate for Supply & Erection of 2Nos of Tubular Lighting/Lightning Mast with Approximate Unit Weight 2.678MT/tower separat...
EARTH MAT FORMATION:
a) Supplying, Laying and welding of M.S.Flats 75x12 mm, applying ACB paint to welded portion and covering with sodium bentonite Clay as per approved drawing, specification and ...
b) Supplying and Grounding of Equipment with G.I.Flat 75x12mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling o...
c) Supplying and Providing 25mm dia M.S.Rod 1.05 m long earthmat spikes including heating, bending top 50mm overlap flattening and making spike edge at the ground level and welding the rod with ground...
d) Supplying and Erection of Grounding of equipments by providing Cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe...
e) Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc
f) Providing Deep Bore Earthing
Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standard and providing sodium bentonite tr...
b) 40mm dia MS rod
c) Bentonite Clay
d) GI flat for joining two rods by welding
Check Survey and Towers Spotting Towers :
a) Survey using their own equipment
i. For 110kV Plain terrain
b) Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor including fixing of conductor accessories, etc., (including all the conductors in each phas...
Erection of Towers (excluding earthing )
1) The tenderers are required to quote the rates taking in to consideration the charges for sorting of towers parts, loading, unloading, stub seti...
Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal including excavation charges.
Releasing existing Lynx ACSR & Ground wire
i) Releasing & Restringing of existing Lynx conductor - 110kV line portion
ii) Releasing & Restrining of existing ground wires - 110kV line portion
Dismantling of existing 110kV DC A+0 Tower
Dismantling of existing type tower parts without stubs including loading and unloading from site to store
1) 110kV DC - A+0 type - 1No./1.86MT per tower
Surveying of cable route, excavation trial holes as per field requirements, preparation of cable route profile drawings for cable laying, final route alignment, marking lines and grades, preparation o...
Laying of 110kV, 630Sq.mm including Testing & Commissioning : EHT single core XLPE copper cable in trefoil, tapping, fixing pipes for drain and gate crossing as per drawings & specification in trench ...
Handling and making of cable end termination for EHV single core 110kV, 630Sq.mm XLPE copper cable.
Out Door Type/Indoor Type
Erection of Single phase earth link boxes on to the cable mounting structure connecting earth leads with all lugs, fixtures, clamps bolts and nuts complete. (110kV)
Erection of 110kV Surge Arrestors on to the cable end termination structure using suitable clamps, fixtures, connecting earth lead etc., complete
Underground Fibre Optic cable & accessories:
a) Handling and making terminal joint branch for 48 fibre Dual window Single mode (DWSM) optical fibre cable with all consumables at site complete
b)Handling & making normal straight joint closures for 48 fibre Dual window single mode (DWSM) optical fibre cable with all consumables at site complete.
c)Laying of 48 fibre Dual window single mode (DWSM) Optical Fibre cable as per drawings and specifications in cable trench parellel to 110kV cable inside PLB Pipes by pulling, drawing etc, including ...
d) Laying of Media converter
OPGW Cable & Accessories:
a) 48 Fiber ( DWSM) OPGW Fiber optic cable for 110kV line (inclusive of conductor offline stringing)
b) 48 Fiber (DWSM) - including installation hardware set for 48 fiber approach cable
c) FODP 48 F: Indoor type( rack mounted with FCPC coupling and pigtails to house LIU)
THERMAL BACKFILL : Design, source, procure and provide suitable thermal backfill + N.T.R value of 120 deg.C Cm/W (if required)
Supplying and Grounding of equipments with 50X6mm GI flat and connecting equipment to earthmat / ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes a...
Supplying and Erection of Grounding of equipments by providing Cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe us...
Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc
UG Cable Supply
110 kV (Earthed), 1C X 630 Sq mm stranded, annealed, copper conductor, compacted circular, conductor screen, cross linked polyethylene (XLPE) insulation, core screen, semi-conducting water swellable l...
Outdoor type cable end termination suitable for 110 kV, 1C X 630 Sq mm copper conductor lead sheathed XLPE insulated cable as per technical specification.
Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 62271-209 for 110 kV, 630 Sq mm, copper conductor, XLPE insulated cable as per technical specification
Single phase Link box outdoor structure mounting type, with SVL suitable for 110 kV, 630Sq mm UG cable including 240 Sq mm sheath bonding cable as per the technical specification.
(including 1 No. Spa...
Single phase Link box outdoor structure mounting type, without SVL suitable for 110 kV, 630 Sq mm UG cable including 240 Sq mm sheath bonding cable as per the technical specification.
(including 1 No....
Supply and Laying of 3.3kV, 1Cx240 sqmm earth continuity cable (sheath bonding cable) as per technical specification.
Lightning Arrestor :
Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR.
Fire Wedge terminal Connectors to connect cable end termination to Lynx/Drake ACSR Conductor with heavy type bolts & nuts and washers complete.
Optical Fibres and accessories
a) 48 Fibre Dual Window Mono Mode (DWMM) Optical
Fibre Cable as per technical specification .
b) Polyvinyl Lubricated Band(PLB) HDPE Pipe OD 40mm.
c) Line Interface Unit for 48Fibre Optical Fibre Cable.
d) Joint box for OPGW to 48Fibre Optical Fibre Cable.
e) Media converter
OPGW Cable & accessories
a) 48 Fiber ( DWSM) OPGW Fiber optic cable for 110kV line (inclusive of conductor offline stringing)
b) Joint Box for 48 Fiber OPGW
c) Down lead clamp assembly for 48 Fiber OPGW
d)Tension fitting assembly on suspension tower for 48 Fiber OPGW including all accessories for joint box assembly for splicing
e) Tension assembly- Double Tension pass through for 48 Fiber OPGW
f) Tension fitting assembly for 48 Fiber OPGW including all accessories for joint box (splicing location)
g)Vibration Damper for 48 Fiber OPGW
h)Suspension clamp assembly for 48 Fiber OPGW
i) Tension assembly for Dead end for 48 Fiber OPGW
FODP 48F: Indoor type (rack mounted with FCPC coupling and pigtails to house LIU)
k) Fiber Optic Armoured Approach Cable:
48 Fiber (DWSM) including installation hardware set for 48 fiber approach cable
Civil Works Portion
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0....
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Disposal of surplus earth/ rock/ unwanted stuffs to the areas directed/notified areas of disposal point of the local bodies including all lead and lift charges, transportion, loading and unloading etc...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nomina...
Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/m2 on existing Concrete substrate of 25Mpa or ...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Supplying and fixing holdfasts
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work over one coat of primer after thoroughly brooming the surface to remove all dir...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum thic...
Providing and fixing bright finished brass butt hinges with necessary screws etc. Complete-125x85x5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing sliding window lock, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...
Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...
Providing & Fixing in position Acoustical wall panelling with Integral Densified Square/Butt edged Fully Perforated Eco Friendly Lightweight Calcium Silicate panels/tiles with fabricated galvanised mi...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893.
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia,
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings rrangement of approved quality and colour, weigh...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing false flooring as per KPTCL specfication including cost of structural steel, fasle flooring materials, labour charges, etc., complete as per direction of engineer in charge of wor...
Providing and fixing modular cable cealing system as per KPTCL specfication including cost of materials, labour charges, etc., complete as per direction of engineer in charge of work.
Double Leaf doorset - Insulated Fire rated doorset (FD 120) - Staircase / exit pathway application / Refuge area. Providing and fixing of ISI marked fire doors as per IS 3614:2021, 120 minutes fire ra...
Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasti...
Design, fabrication, supply, erection, testing and commissioning of 5 Tonne capacity EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cros...
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration with...
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, suppo...
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, suppo...
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized ...
Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-200 specification suitable for a catchment area of about 500Sqm.
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
ix) Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
GALVANISED MILD STEEL TUBES:
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Ercerion of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm
including the cost of materials, labour charges, required tools and plants etc., complete...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete...
Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...
PSupplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the s...
Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...
Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12933 6/16A Universal Socket.
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.16-25 A 2 pole
Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
SSupplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply.400 mm Sweep
Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 5...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...
INDUSTRIAL HIGHBAY LUMINAIRE ( INTEGRAL TYPE) Industrial medium/high bay luminaire with integral type Control gear, copper wound ballast, visor glass assembly and including supply of lamps. 100W, 240...
Supply and fixing Battery operated portable fluoresent lamps
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends/ End-caps of same materials in exisiting trench as per IS 14930 part -II ...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 150 sqmm Long Barrel
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Bituminous course
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Granular course
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...
Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Construction of Granular Sub-Base of grading V material as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...
Tack coat on Granular surface treated with primer:Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2on the prepared bituminous ...
Dense Graded Bituminous Macadam Grading - I for traffic less than 20 MSA
Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified gr...
Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and f...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Annexure UG Cable Type Tests.docx
Others - Annexure UG Cable Type Tests • 0.03 MB
Section-8 Drawings.zip
Others - Drawings • 4.95 MB
Revised Advisory Note.pdf
Others - Advisory Note to Bidders • 0.41 MB
Circulars and Guidelines.zip
Others - Circulars and Guidelines • 1.41 MB
Section-7 Technical specification.zip
Others - Technical Specifications • 37.11 MB
Detailed NIT Sadashivanagara WI528.pdf
Others - Detailed NIT • 10.26 MB
Proceedings of Pre-Tender Meeting Sadashivanagara 25.01.2024.pdf
Others - Pre-Tender meeting Proceedings • 0.05 MB
Commercial Condictions SadashivangaraWI528.pdf
Tender Document • 1.33 MB
Section 11a Techno Com Sadashivanagara.xlsx
Techno-Commercial Worksheet • 1.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .