Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹37.0 L+₹170 (<0.01%)Rejected-Finance | L2 | Rejected-Finance Not Being lowest | |
| 3 | L3₹37.0 L+₹3,675 (0.10%)Rejected-Finance | L3 | Rejected-Finance Not Being lowest | |
| 4 | L4₹37.1 L+₹8,025 (0.22%)Rejected-Finance 1252 SECTOR 15 PANCHKULA 134113 | PANCHKULA | HARYANA | 134113 | L4 | Rejected-Finance Not Being lowest | |
| 5 | L5₹38.5 L+₹1.5 L (4.07%)Rejected-Finance | L5 | Rejected-Finance Not Being lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-06/2022-2023 REPAIR AND MAINT OF BLDGS OF JCOS / OR MD ACCN IN SECTOR D EXCEPT MAP QTRS UNDER AGE B/R I AT CHANDIMANDIR
2022_MES_518449_2
GE/CHM-06/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹94,000
29 Aug 2022
23 Jun 2022
5 Aug 2022
23 Jun 2022
29 Jul 2022
4 Jul 2022
Amount
Taking down wooden chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down wooden chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each and removing from site complete all as specified & directed.
Dismantling boarding any description fixed a in cupboard shelves with nails complete all as specified & directed.
Hacking out old broken glass ( any thickness) size quality etc from metal frames fixed with pin, beading or oil putty complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Taking up or down steel tubing and connections 20mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removal complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Demolition of reinforced cement concrete of any description in any position complete all as specified and directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places outside the premises complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed as in repair complete all as specified and directed.
Supply and fix drapery rod (conduit) of dia not less than 25mm having a corrugated virgin PVC extrusion on its surface and ABS plastic rings and finials of approved shed with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws fixed as in repair complete all as specified and directed.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Petty repair welding work as in welding to butt hinges / tower bolts to old angle iron frame / pressed steel door frame / steel windows make smooth as required, thickness of metal not exceeding 6mm complete all as specified and directed.
Steel window, box type, fixed as in repair one shop coat of primer, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 03Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 18 hereinbefore but without glazing bar.
Steel ventilator factory made (ERW tube 'P' section) with side hung shutter including hinges, steel peg stay, a shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified and directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Factory made plain framed panelled shutters, hammer marked, 35mm thick (with two panel) of 2nd class hard wood with lock rail and panels of 9mm thick commercial ply duly hammer marked. The size of rail & style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated including a shop coat of pink primer complete all as specified & directed.
Glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Flush shutters 25mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.
2nd class hardwood boarding 20mm thick, planed one side and butt joints, supplied and fixed with nails in cup board shelves complete all as specified & directed.
Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Mild steel sliding door bolt 300mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, complete all as specified and directed.
100mm aluminum anodized barrel tower bolts of extruded section, dia of bolt not less than 10mm, complete all as specified and directed.
150mm aluminum anodized barrel tower bolts of extruded section, dia of bolt not less than 10mm, complete all as specified and directed.
100mm long aluminum handle cast type anodized complete all as specified and directed.
150mm long aluminum handle cast type anodized complete all as specified and directed.
Butt hinges, cold rolled mild steel medium weight 100mm long and fixed with screws or with welding to existing MS frame complete all as specified & directed.
Hasp and staple 100mm size, safety type aluminum anodized including bolt to hinge plate, fixed as in repair complete all as specified and directed.
Aluminum door seal brush 900mm long , fixed with steel screw at bottom rail of door shutter, all as specified and directed,
Double legged door stopper of aluminum alloy body, with rubber foot, size 150mm, ISI marked and fixed with standard aluminium screws, fixed as in repair complete all as specified and directed.
Cast copper alloy, chromium plated towel rail, 20mm dia, 60cm long between flanges fixed as in repair, complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, fixed as in repair complete all as specified & directed by Engineer-in-charge.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 41 hereinbefore but except GI pipe using old pipe retrieved
Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 43 hereinbefore but except GI pipe using old pipe retrieved
PVC (SWR) floor trap 75mm bore, plain with grating and jointing with solvent cement, fixed as in repair complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (including 10 ltr PVC flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding fixing bolts, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed.
Stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Angular stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib tap standard of PTMT, of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm fixed on and including galvanised angle brackets, fixed as in repair complete all as specified and directed.
32mm dia waste coupling of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed.
15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.
Wash hand Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Shower arm brass chromium plated for fixing with 15mm bore pipe 195mm long with bend of 45 degree with flange, fixed as in repair complete all as specified and directed
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
15mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210gms ), fixed as in repair complete all as specified and directed.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 15mm bore pipe (minimum weight 142gms ), fixed as in repair complete all as specified and directed.
Standard kit of PVC internal fittings for low level flushing cistern fixed as in repairs complete all as specified and directed
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Grating square with slit with or without hole of PTMT (Minimum weight 100 gm) made in two parts for smell and mosquito proofing with 25mm water seal fitting of shade matching to tiles / floor, fixed with white cement including including matching shade pigment, fixed as in repair, complete all as specified.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bends any radius fixed as in repair complete all as specified and directed.
PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) bends any radius fixed as in repair complete all as specified and directed.
CI bends suitable for 100mm bore pipe (any radius), diminishing pieces or tapers ( larger bore measured ) fixed as in repair complete all as specified and directed.
Cast iron 'P' or 'S' trap, suitable for 100 mm bore CI pipes fixed as in repair, complete all as specified.
CP waste coupling / waste fitting with long shank, half thread, 32mm bore for kitchen sinks, basins, bedded in red lead fixed as in repair complete all as specified and directed.
32mm dia PVC waste pipe 800mm long with PTMT nut, fixed as in repair complete all as specified and directed.
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
PVC cover with nut, bolt and screw etc suitable for water storage tanks of capacity 500 ltrs, fixed as in repair complete all as specified and directed.
Shelf of PTMT fixed with and including Chromium plated steel screws and plastic cleats (Minimum weight 300gms) fixed as in repair complete all as specified and directed. MAKE : PRAYAG /POLYTUFF/ CERA/HINDWARE
Cast iron spun pipes, soil, waste and vent pipe 100mm dia bore, in any length with or without ears, in cement joint, fixed to walls with flat iron clamps etc, fixed as in repairs, complete all as specified and directed.
Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 940mm x 460mm, with bowl of size 405mm x 354mm x 178mm incl fixing cantilever brackets and connection to union, pipe, including removal of old kitchen sink of stainless steel with brackets fixed as in repairs complete all as specified and directed.
600mm x 600mm x 250mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, fixed as in repairs complete all as specified and directed.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.
Racking out joints in brick tiles laid flat in roof etc and flush pointing in cement and mortar (1:3) complete all as specified & directed.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Glazed coloured ceramic tiles 6-7mm thick in vertical surface area or each tile exceeding 0.08 sqm but not exceeding 0.16 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.06 sqm but not exceeding 0.16sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, including dismantling of old paver block and removal of debris to a distance n.exc 1.5 Km of any description complete all as specified and directed
Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 40 mm thickness, M-35 Grade, including dismantling of old paver block and removal of debris to a distance n.exc 1.5 Km of any description complete all as specified and directed
Sand filing under floors, tiles or similar situation, including watering and consolidating,all as specified and directed.
15-18mm thick baroda green marble stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on kitchen platform, steps, pillars, floors etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 20mm thick in cement mortar 1:3 and rounding off/bull nosing exposed edges and making holes for gas pipes etc including dismantling old tiles complete all as specified and directed.
Demolition of cement concrete of any description and in any position(in sunken portion) not other wise specifically provided for and removing all demolished material /debris exc 250m but n.exc 500m from the site and depositing where directed complete all as specified and directed.
Plain cement concrete (type B-0), 1:2:4 using 12.5mm graded stone aggregate on roof kerbs rounded or chamfered including and admixing Dr Fixit pidiproof LW @ 200ml per 50Kg cement bag complete all as specified and directed.
Applying waterproof coating in two layers with brushes using Dr Fixit Pidifin 2K (grey powder+white liquid), mix ratio 1:1½ (by volume) complete all as specified and directed.
Applying 15mm thick cement plaster in cement mortar 1:4 (cement coarse sand) including and admixing Dr Fixit pidiproof LW @ 200ml per 50 kg cement bag all in complete as per manufactures specifications complete all as specified.
Hard core of broken brick of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface for filling into the sunken portion complete all as specified & directed.
Plain cement concrete 1:2:4 (type-B-1) using 20mm graded stone aggregate 75mm thick for floor including and admixing Dr Fixit pidiproof LW @ 200ml per 50 kg cement bag including top coating using Dr Fixit URP, mix ratio 1:1½ (URP : Cement) complete as per manufactures specifications complete all as specified.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in flooring, rough finished complete all as specified and directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
All as per serial item No 99 herein before but except bricks
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfaces finished fair and even without using extra cement ,complete all as specified & directed.
15mm thick rendering in Cement and Sand mortar 1:6 over other than fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed
10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directed
10mm thick rendering in patches, area n.exc 3 Sqm, in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished fair and even without using extra cement , complete all as specified & directed.
Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and directed
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Preparation of old decorated wall surfaces and applying two coat of oil bound distemper complete all as specified and directed.
Preparation of old surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed
Preparation of new plastered ceiling / chajja surfaces and applying three coats of white wash complete all as specified and directed
Two coats of white wash on ceiling / chajja surfaces including preparation of old surfaces complete all as specified and directed
Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
Preparation of old plastered or un-plastered surfaces of walls and applying one coat of cement base paint,complete all as specified and directed.
Reinforced cement concrete type A-1, 1:1½:3 (nominal mix), using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, chajjas , shelves etc and the like complete all as specified and directed (Reinforcement shall be measured and paid for separately).
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.
Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.
Form work to sides and soffits of slabs, floor or roof beams, beam hanunchings, girders, shelves, chajjas including supports, overhangs etc also splays between floors and beams etc, rough finished surface of concrete complete, all as specified and directed.
Rendering 15mm thick (average thickness) rendering on roof surfaces including flashings and junction of parapets etc finished even and fair in cement mortar 1:4 using wate proofing compound as per manufacturer's instruction after brushing cement slurry complete all as specified and directed
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.
3mm thick Atactic polypropylene polymer (APP), five layer, based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous resistance aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .