Loading…
Loading…
Tender Value
₹74.2 L
EMD Value
₹1.5 L
Closing Date
6 Oct 2026, 2:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
For works amounting Rs.50 lakhs and above: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any work involving supply, Installation Testing and Commissioning of CCTV surveillance system using Fixed/Bullet/dome/PTZ type camera.
10 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, XI, VIA, VIB, VI and Annexure-V and Annexure- V(A) of GCC-2022 respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
1. Tenderer must understand the work before quoting. Submission of tender shall be deemed to have been done after careful study and examination of papers as well as work site and understanding of the implication thereof. 2. Quoted rates shall include all types of taxes (including GST), duties, carrying cost of all materials for the work including loading unloading involved in the concerned work. 3. All the supply materials to be deposited at the store of SSE/Tele/Store/ASN. 4. All material supplied by Railway as well as those supplied by the contractor have to be transported from the store of SSE/Tele/Store/ ASN to the site of work by the contractor's own arrangement. 5. All released materials as well as any leftover material intact will have to be transported from the site back to the office of the SSE/Tele/Store/ASN by contractor's own arrangement. 6. Any petty material which is required for execution of the work, not mentioned in this schedule as Rly. supply, contractor has to arrange for the same as per advice of Site Engineer. 7. Items supplied by the contractor will be inspected by the authorized representative of Sr. DSTE/ASN or RDSO/Rites as mentioned in schedule of work. The product (cctv camera) should be STQC certified under the terms & condition of the IoT system certification scheme (IoTSCS). All the cost of inspection shall be borne by the contactor. 8.Contractor have to submit indemnity bond for safe custody and protection of railway materials during transportation (sample may be collected from office) 9. Work to be done as per advice of site engineer.
10.The Contractor & his supervisors, staff must take proper precaution during working in Railway area to prevent any interference with existing Rly. system, working & passengers. 11. Care should be taken to avoid damage to existing gears during the work. Any damages to the Railway property shall be made good by the contractor in his own cost. 12. Payment shall be made as per extant works contract procedure based on actual work done. 13. Latest guideline of Railway Bd.'s vide letter no. 2018/CE-I/CT/9 dated 04.06.2018 regarding "Letter of Credit" as Mode of payment in Works Tenders or Service Tenders is attached in pdf file. 14. An Eastern Railway Guidelines (ER cable cut JPO) for protection of cables while digging work in the vicinity of underground Signalling, Electrical & Telecommunication cable (ER letter No.SG.244/13/0 DT.12.08.2024) has been finalised. Accordingly, while working near underground Signalling, Electrical & Telecommunication cable, proper care should be taken to avoid the cable cut, other wise the penalty amount as per Railway Guidelines will be recovered from the erring contractors.
Asansol Division: Provision of CCTV at LC Gates having very high TVU, on 07 Nos high Mast Poles and National Flag Mast Over Asansol Division for monitoring by RPF.
60-SDSTE-ASN-2026-27~ER
60-SDSTE-ASN-2026-27
Open
Works - General
12 Months
Paschim Bardhaman, West Bengal
₹0
₹1.5 L
14 Sept 2026
14 Sept 2026
22 Sept 2026
195 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 5,73,990 | ||
| — | 100.00 | — | — | ||
| Supply of CAT-6 UTP RJ-45 patch cord(2mtr long) twisted stranded cableterminated with RJ45 modular plugs atboth the ends. TIA/EIA-568-C.2 standard,Insulation Material : High DensityPolyethylene, Outer Jacket: FR-PVC,Conductor diameter: 24 to 26 AWG,Conductor Metal : Bare Copper, Make D-Link/Similar, Inspection: Consignee. | — | — | — | 24,100 | |
| — | 1220.00 | — | — | ||
| Supply of CAT6 U/UTP Cable for Indoor use, 4-pair unshielded twisted pair (UTP)cable, FR PVC Jacket, High Density Polyethylene insulation, 23 AWG solid copper conductor for superior conductivity, Conductor diameter: 0.57mm (23 AWG), supports Gigabit Ethernet(1000 Base-T) standard, Make -Molex/DLINK/similar. Inspection:Consignee. | — | — | — | 30,500 | |
| — | 300.00 | — | — | ||
| Cutting of platform surface (tile/slab/concrete) for a depth of 20 cm. & width of 10 cm. & refilling /reconditioning/ repairing the platform after laying pipe & cable. Cutting should be done with marble cutting machine in proper manner & restore the same as before in such a manner that the aesthetic of PF is not disturbed. | — | — | — | 1,31,100 | |
| — | 21.00 | — | — | ||
| Supply of wall mount 6U Rack EnclosuresNetworking/Server Rack with power strip5A socket 06 no. & MCB, Depth of theRack: Upto 600mm, TransparentToughened Glass used in front door, CRCASteel rear door, with Secure Locks,Support cable entry from top or bottom,with fan tray and two nos. fans, , make:Valrack/Dlink/Digilink/similar. Inspection:Consignee. | — | — | — | 1,43,619 | |
| — | 21.00 | — | — | ||
| Supply of Floor mounting surge supressure(4 Nos. Of 16A Socket in each strip), protection should be provided in each socket separately , Weather proof light gr ay color M.S. enclosure, Normal input voltage: 230VAC,+/- 10% Single phase, 50- 60Hz, Input AC cord: 6 ft. 3 core 15 amps. One ANCHOR/Ha vells make 16 amps top to be provided at one end of the mains cord, LED indication: One 5mm red LED for power ON, One 5mm green LED for protection present., Output Termination: 4 Nos.16 amps socket of anchor mak e to be provided, Thermal cutoff: 16 amps MCB to be provided, make: Rockware/similar, Inspection: Consignee. | — | — | — | 1,59,201 | |
| — | 21.00 | — | — | ||
| — | 21.00 | — | — | ||
| — | 21.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
GCC Correction Slip1
ATTACHMENT
GCC Correction Slip2
ATTACHMENT
mergedGCCCorrectionslip3456.pdf
ATTACHMENT
MergedGCCCorrectionSlip78910_1.pdf GCC Correction Slip78910
ATTACHMENT
2018-CE-I-CT-9dtd.pdf
ATTACHMENT
Annexure-C.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
2022_CE-I_CT_GCC-2022Policy14.07.2022.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.20221.pdf
ATTACHMENT
MergedGCCCorrectionSlip78910_1.pdf
ATTACHMENT
GCCCorrectionslip11.pdf
ATTACHMENT
ALLANNEXURENEW.pdf
ATTACHMENT
CABLECUT_DiggingJPO_12.08.2024.pdf
ATTACHMENT
CCTVatLCGATE_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .