Constuction of Processing Shed (380 Sq.Mt.)

Amount

Construction of Processing Shed (380 Sq.Mt.)

S.W. I - Processing Shed (380 Sq.Mt.)- Excavation for foundation earth, soils of all types, sand, gravel & soft murum, including removing the excavation material up to a distance of 50m.and necessary back filling, raming, watering,including shoring & strutting as necessary complete.SSR No. 21.01, Page No. 153

Providing and laying in situ cement concrete in 1:4:8 of trap/granite/quartzite/gneiss metal for foundation and for rendering uneven and honey combed surface only. Newly laid conce\rete shall be covered by gunny bag,plastic, trapaulin etc.SSR No. 24.01, Page No. 175

Providing and layinginsitu/Ready Mixcemen tconcrete M20oftrap/granite/quartzite/gneis smetal for R.C.C. work in found ation slike raft, strip foundations, grillage and footings of R.C. C. column sand steel stanchions etc.including bailing out water,Steel centering form work,la ying/pumping cover blocks,compaction andc uring roughening thesurface if special finishis to be provided (Excludingre inforcementands tructuralsteel) etc.complete,withfully auto m aticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batchmixplant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) SSR No. 25.11, Page No. 178

ProvidingandlayingCastinsitu/Ready Mix cement concrete M-granite/quartzite/gneiss metal for R.C.C.columns as per detailed design sand drawing or as directed including steel centering, form work, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curin etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).SSR No. 25.31, Page No. 179

Providing and layming Cast in situ/Ready Mix cement concrete M20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed design sand drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinfor cement and structural s teel). with fully automatic micro processorb as ed PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).ssr item no. 25.50, Page No. 181

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed facesand watering etc. Complete.Ssr Item No. 27.01,Page No. 197

Providing second class Burnt Brickmasonry with conventional / I.S. type bricks in cement mortar 1:6 in super structure include ingstriking joints, raking out joints, watering and scaffolding etc. Complete. Ssr Item No. 27.05, Page No. 197

Providing and laying Cast in situ/ReadyMix cement concrete in M20 of trap/granite/quartzite/gneissmetal for R.C.C. copingt op linthorp arapet and sill of door sand window smouldeda sperdetailed drawing sorcham fereda sapprov edbythe Engineer including steel centering, form work ,cover blocks, laying/ pumping, compacting, curing, finishing and roughe ingthem if special finish is to be provided and curing complete. (Excluding reinforcement and structu ralsteel) .with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer /concrete Batch mixplant (Pa nmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade), Ssr Item No.26.23, Page No. 185

Filling in plinth and floors with contractors approved material/sand or murum in 15 to 20 CM layer including watering and compaction complete.Ssr Item No 21.37, Page No. 157

Providing internal cement plaster 12mm thick in single coating cement mortar 1:5 with outer finish to concrete or brick surfaces, in all position sincluding scaffolding and curingetc.complete. Ssr Item No. 32.03, Page No. 209

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compoundat 1 Kilogram percement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar1: 4 finishing the surface by taking out grain sand curing for fourteen days scaffolding etc.complete. Ssr Item No. 32.11, Page No. 209

Providing and fixing in positionTMT- FE 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintel spardis, copings, fins, arches etc. as perdetai leddesigns, drawing sand schedules. including cutting, bending, hookingthe bars, binding with wiresortack welding and supporting as required complete. Ssr Item No. 26.33, Page No. 188

Providing and laying cement concrete floorin g 50 mm thick with M20 cement concrete laid to proper level and slope in alternate bays includ ingcompaction,filling joints,marking lines to give the appearance of tiles of 30cm x30 cm or o the rsize laid diagonally/square etc.finishings mooth (withextracement) in any colour as dire cted and curing etc.complete.WithCrushedS and. Ssr Item No.33.16 , Page No. 214

Providingandapplyingtwocoatsofwaterpro of cement paint of approve dmanu factureand of approved colour totheplastered surfacesin cluding scaffolding if necessary ,cleaningand preparing the surface, watering for two days etc. complete. Ssr Item No. 35.13, Page No. 224

Providing and fixing rolling shutter fabricated from steel of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolt sand handles for both sides,deep M. S. channel section of depth and thickness not less than 65 mm and 3.15mm respectively with hold fast arangments, M.S. Bracket plate 300 x 300 x 3.15mm minimum size and shape withs quare bar, suspensions haf tof minimum 32 mm diameter, hood cover of M.S.sheet not lessth an 0.9mm thicknes and of any size attop and safety devic e sincluding mechanical gearoperation arran gement consisting of worm gearwheel sand w orm sofhig hgrade castironormild stee landon ecoa to fred lead primer etc. complete. (I.S. 62481979) (Without mechanical gear.Ssr Item No.39.24 Page. No. 248

Providing structural steel work in trusses, purlins and members with all bracing, gusset plates etc. as per detail drawing or as directed including cutting, fabricating, hoisting, erecting,, fixing in position, making riveted/bolted/ welded connection and one coat of anti corrosive paint and over it two coat of oil painting of approved quality and shade complete. Ssr item no. 23.04 Page No. 173

Providing and fixing 22 B.W.G. plain galvanisedirons heets on top of weather shed,including scaffolding, fixing by meansofnutand boltsor asdirected etc.complete.(Brackets of 70x45 mm to be paid separately)SSR Item No.39.88, Page No. 263

Providing and fixing valleygutter of 22 B.W.G (0.8mm)plaing alvanise dironsheets 90 cm wide with teak wood planking 20 mm thick including two coats of coaltarring the upper surface of plank etc. complete. (excluding painting to underside of plank). SSR Item No. 38.09 Page No. 233

S.W. III - ROYALTY -Metal 40 mm & above

Murum

ELECTRIFICATION -Single core PVC insulated copper wire 1.5 sq mm

Bulb 60W Pin type

CFL 23w holder type

Switch MCCB 100A

MCB 20Amp

Tube Rod 36W

6 M Modular PVC Box

Switch 15A

Socket 15A

Choke 18 watt for 4 pin CFL

3 Core,2.5 sq mm, flexible PVC insulated cable

Connector strip 10A (12point)

Plug Top 25A,3 pin

PVC Tape roll

Batten nail

Tube Starter 20-65W

Terminal power strip, 15 Amps, 3 Socket 3 Switch

QUALITY CONTROL & LAB TESTING - Mix Design M-20 Concrete

Cement -Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

Aggregate -Water Absorption, Specific Gravity,Impact Value, Crushing Value

Brick - Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

Concrate-Compressive Strength M-30, M-20. (Set of 3 Cubes)

Morter-Compressive Strength.( Set of 3 Cubes)

Morter- STEEL BAR TESTING Upto 12 mm, 16 mm, 20 mm (Set of 3 Bars)

LABOUR INSURANCE - 0.5%

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

Amol R. Motghare